Open Brush, Open Blocks, Icosa Gallery•4y ago

Hmm, when open tilt brush become open source, did its history also become available to the public? M

Hmm, when open tilt brush become open source, did its history also become available to the public? Maybe its possible to figure out what changed between the updated version and the build that works for me?

JJesse/Krashe Hmm, when open tilt brush become open source, did its history also become availa...

mikeage•12/27/21, 7:32 PM

Unfortunately, we don't have any history of TB

Jesse/KrasheOP•12/27/21, 7:33 PM

Dang

Aandybak So - unless we can figure out why this is affecting you, or some way to reproduc...

AncientWorlds•12/27/21, 9:48 PM

Is it possible that the mode didn't change in the build?
I get that issue if I don't switch the tab from console to game in unity.
My memory is a bit hazy, might also happen if I exit the game from inside rather than unity, or close steam and leave oculus open, would have to check.
Not sure if being in monoscopic or something similar would have the same effect?
Anyhow, potentially a sequencing error where it's not switching states properly?

Zandy•12/28/21, 1:20 PM

Is it possible to get the camera showing with post effects capture on false? One thing I miss with TB is the ability to capture clear videos without post effects.

mikesky•12/28/21, 3:50 PM

I know, it's a really annoying bug that we're still trying to figure out the 'correct' solution for

luckylou•12/31/21, 5:24 PM

Hi @andybak - answering your questions beginning with https://discord.com/channels/783806589991780412/805085605654429736/926453594230775879

The monoscopic view app on Mac has an export video to paths option but 1) I don't know how to properly set paths yet, 2) the interface is super clunky to manage, and 3) I set a couple random paths to test but then actually trying to export freezes the app.

You're right, Quest doesn't export video, and based on the Open Brush Trello, it's an acknowledged request but remains in that column, so I doubt it's anywhere in experimental builds.

My main need is a way to convey what the NFT art is in OpenSea beyond the wireframe-ish visuals provided by the default .glb file export I get from Open Brush on Quest 2. The monoscopic view app on macOS exports an Untitled.json file, and I've seen the Python scripts to use to convert to other formats but those aren't accepted on OpenSea so I haven't gone there.

Right now I'm just planning to use an animated gif for the thumbnail preview and use either a saved movie file from a Quest broadcast to Facebook Live or similar screencast session with a quick walkthrough of the piece as the actual NFT, with a property link to the .tilt file for the actual piece, OR just go with the wireframe-ish result of the .glb and add the linked .tilt as described before. Either way it's a very unfulfilling result. The art is really minimal so it relies on the shaders and brush effects for life.

luckylou•12/31/21, 5:40 PM

Is there any way to make the 5-second animated GIF not have to use all 5 seconds?

andybak•12/31/21, 5:43 PM

and based on the Open Brush Trello, it's an acknowledged request but remains in that column, so I doubt it's anywhere in experimental builds.

Ah. This is super confusing. "Experimental mode builds" are different to "experimental builds": https://docs.openbrush.app/alternate-and-experimental-builds/main-experimental-build

"Experimental Mode" Builds - Open Brush Docs

andybak•12/31/21, 5:45 PM

Experimental mode predates open brush - it's something we discovered in the codebase when it was open sourced and we plan to get rid of it eventually. But there's some features that were developed and never released and some PC only features are sometimes available - My original comment was wondering if "camera paths on the Quest" was in the latter category.

Aandybak Experimental mode predates open brush - it's something we discovered in the code...

luckylou•12/31/21, 9:08 PM

Interesting - thanks for illuminating. I will check that out soon. Trying to mint before 2021 is over so I have to work with what I’ve got for now!

Ozymandias•1/5/22, 10:39 PM

what brushes work with masterpiece studio motion (can i pls ask) thank you!

OOzymandias what brushes work with masterpiece studio motion (can i pls ask) thank you!

AncientWorlds•1/6/22, 1:02 AM

good question, no idea. Try them and let us know!

AAncientWorlds good question, no idea. Try them and let us know!

Ozymandias•1/6/22, 1:32 AM

(if i go ahead with this) i will let you know if i find anything surprising, atm i think its just the ones i can see in blender when i convert the model to an fbx before exporting to masterpiece motion

Ozymandias•1/6/22, 1:33 AM

havent tried it yet!!

OOzymandias (if i go ahead with this) i will let you know if i find anything surprising, atm...

AncientWorlds•1/6/22, 2:06 AM

I'm guessing if you can get it to convert to fbx it should be fine. I played around a little bit when it was first released, but that was quite some time ago

AAncientWorlds I'm guessing if you can get it to convert to fbx it should be fine. I played ar...

Ozymandias•1/6/22, 12:03 PM

Thanks!!

OOzymandias Thanks!!

AncientWorlds•1/6/22, 12:10 PM

just a guess. Has been a couple of years, it's probably changed a lot. Used to just take a figure and weight it, used either obj or fbx, maybe both

izitheartist•1/6/22, 1:17 PM

hello how can i install this Open brush on oculus 2

mikesky•1/6/22, 1:22 PM

You can grab it here! https://www.oculus.com/experiences/quest/3600360710032222/

Oculus

Open Brush on Oculus Quest

A Tilt Brush derivative for free on Oculus Quest! Enjoy making awesome art in VR.

izitheartist•1/6/22, 6:07 PM

thank you

Chlpáč•1/7/22, 2:00 PM

Hello good people.
A few days in a row I am trying to use open-brush-toolkit in unity. I tried tilt-brush-toolkit before, and it worked, but I was unable to export because of some incompatibility with the microphone so I searched for the newest .unitypackage and I found open-brush-toolkit.
Now I am trying to import
into (LTS)
When I import that package into a newly created project, I get 127 errors.
I tried to google a few of them but I am lost. I am probably doing some mistake that would be obvious for you at first glance, but I can't see it. Can anyone help me please? :LofiGirlPleading:

CChlpáč Hello good people. A few days in a row I am trying to use open-brush-toolkit in ...

andybak•1/7/22, 2:12 PM

Hmmm. We removed JSON.Net from the package because it's included by default in 2020 and 2021 projects. Is this a new blank project or an older project you've updated to Unity 2020? Have you removed any packages from package manager?

Aandybak Hmmm. We removed JSON.Net from the package because it's included by default in 2...

Chlpáč•1/7/22, 2:16 PM

I created a fresh new project in 2020.1.6f1 and then double-clicked .unitypackage and imported it. Might there be something wrong with my unity installation?

Chlpáč•1/7/22, 2:17 PM

Chlpáč•1/7/22, 2:18 PM

mikesky•1/7/22, 2:20 PM

try adding as a package, you'll need to do it manually I think, it doesn't appear in the list

andybak•1/7/22, 2:20 PM

I don't have 2020.1 but in 2020.3 it's pulled in as a dependency of Version Control - which is enabled by default:

andybak•1/7/22, 2:21 PM

do you see "Version Control" in the package manager?

mikesky•1/7/22, 2:21 PM

We'll fix this when we make the toolkit a package, that's for sure

andybak•1/7/22, 2:21 PM

yeah. was just thinking that

andybak•1/7/22, 2:21 PM

not sure how you set dependencies without using UPM packages.

mikesky•1/7/22, 2:22 PM

asmdefs possibly?

mikesky•1/7/22, 2:22 PM

glTFast does it, i'd need to have a look

Mmikesky try adding `com.unity.nuget.newtonsoft-json` as a package, you'll need to do it ...

Chlpáč•1/7/22, 2:25 PM

I am a web developer. I am pretty new to unity, so I am not sure how to do that manually, but I will search for that on google

Aandybak do you see "Version Control" in the package manager?

Chlpáč•1/7/22, 2:25 PM

I do see have Version Control in

andybak•1/7/22, 2:26 PM

click settings:

andybak•1/7/22, 2:26 PM

then show dependencies:

CChlpáč I am a web developer. I am pretty new to unity, so I am not sure how to do that ...

mikesky•1/7/22, 2:26 PM

Ah, apologies! click the plus button in the top left, then 'add via git url' I know it's not a url, but it's just a hidden package

andybak•1/7/22, 2:26 PM

should look like this:

CChlpáč I am a web developer. I am pretty new to unity, so I am not sure how to do that ...

andybak•1/7/22, 2:27 PM

do you see anything like that?

andybak•1/7/22, 2:28 PM

(mike - we're talking at cross purposes - i'm trying to understand why it isn't working, you're trying to just get it fixed. gimme a few minutes before we resort to "just get it working"!)

Chlpáč•1/7/22, 2:29 PM

ok I checked Show dependencies

Chlpáč•1/7/22, 2:29 PM

andybak•1/7/22, 2:29 PM

ah! no "Version Control"!

CChlpáč I do see have Version Control in `Packages: In Project`

Chlpáč•1/7/22, 2:30 PM

jup

Chlpáč•1/7/22, 2:30 PM

sorry

andybak•1/7/22, 2:30 PM

I thought you said "I do see have Version Control in Packages: In Project"

Chlpáč•1/7/22, 2:30 PM

my bad

Chlpáč•1/7/22, 2:30 PM

I meant to say "do not"

andybak•1/7/22, 2:31 PM

ok. so quick fix - add it