Wow, that's a lot to digest. I did update AMD's chipset driver to the latest and saw no improvement.

Wow, that's a lot to digest. I did update AMD's chipset driver to the latest and saw no improvement. I'll try one thing at a time as you suggested. I think it's pretty clear now that it has something to do with signal integrity.

SwiftVengeance•12/15/22, 4:38 AM

Yeah I think so too. Basically try to get the best signal possible and do the settings changes.

SwiftVengeance•12/15/22, 4:50 AM

https://www.usb.org/products

SwiftVengeance•12/15/22, 4:50 AM

Use this website for anything you get

SwiftVengeance•12/15/22, 4:51 AM

If the product your looking at is on here then its guaranteed to meet usb specifications

SSwiftVengeance If the product your looking at is on here then its guaranteed to meet usb specif...

HomeOfMomoOP•12/15/22, 5:10 AM

Roger, thanks!

PiNKSH!T•12/15/22, 9:11 AM

Hey sorry if I'm missing something obvious, but is there any documentation/tutorials of any kind to show me how to go about initial set up of the Rhino base?

walmis•12/15/22, 9:15 AM

Hey, there's the in-depth technical guide about the system: https://www.youtube.com/watch?v=iNhRD2Bsb8o
This one was made for the kits, but applies to the Rhino too.

Grab the software here: https://vpforcecontrols.com/usb/rhino/

YouTubeValmantas Palikša

VPforce 'Rhino' FFB Kit Getting Started Guide

This is a first introduction of the Rhino FFB system that will be available soon for purchase as a DYI kit. This system will enable enthusiasts to build a plug-an-play FFB joysticks with custom mechanics. Contact me for details if interested.

Contacts:
VPforce Discord Channel: https://discord.gg/Y7YmFGHbee
DCS Forums: https://forum.dcs.world/p...

Magpie•12/15/22, 9:15 AM

Haha I'm going through the same thing right now

Magpie•12/15/22, 9:15 AM

Is crazy

Magpie•12/15/22, 9:16 AM

F14 omg

Wwalmis Hey, there's the in-depth technical guide about the system: https://www.youtube....

PiNKSH!T•12/15/22, 9:16 AM

Ha ha, like I said, sorry about missing the obvious!

Magpie•12/15/22, 9:16 AM

I'm just restarting dcs all the time when I make changes

MMagpie I'm just restarting dcs all the time when I make changes

PiNKSH!T•12/15/22, 9:17 AM

right, well I need to do the firmware possibly & just install the software etc. really just want to get the Ka50 set up & go test this thing out!

Magpie•12/15/22, 9:19 AM

Finally just figured out I had the wrong ffb axis inverted

Magpie•12/15/22, 9:19 AM

F5 trim was driving me insane

Magpie•12/15/22, 9:20 AM

Hey if the stick is waaaay more further forward than I think it should be for the f5

Magpie•12/15/22, 9:20 AM

Do I change a setting?

walmis•12/15/22, 9:21 AM

I think that's the way it is in DCS

walmis•12/15/22, 9:21 AM

the F-5 has short FWD travel, and much more AFT travel ?

walmis•12/15/22, 9:21 AM

Can't rememeber exactly

Magpie•12/15/22, 9:22 AM

Yeah

Magpie•12/15/22, 9:22 AM

Maybe I have to change the endstop

Magpie•12/15/22, 9:22 AM

It's there a way to make changes in the app on the fly without having to restart dcs?

walmis•12/15/22, 9:23 AM

Oh it messes up DCS if you change settings in the app ?

walmis•12/15/22, 9:23 AM

Generally it should work without restarting DCS

Magpie•12/15/22, 9:23 AM

Nah the stick just goes dead sometimes

walmis•12/15/22, 9:24 AM

Ah, I'll need to have a look

Magpie•12/15/22, 9:24 AM

Ahhhh gimme a day to trial and error it

Magpie•12/15/22, 9:24 AM

Amazing dude tho thanks so much

Wwalmis the F-5 has short FWD travel, and much more AFT travel ?

Magpie•12/15/22, 9:25 AM

Like in game the stick is vertical but in the simpit it's almost at the front stop

PiNKSH!T•12/15/22, 9:25 AM

Is it a viable strategy to make one profile each for helicopters, fly-by-wire & warbirds/ga then make copy & tweak from there? or just easier to make a seperate one for each aircraft as you come across it?

MMagpie Amazing dude tho thanks so much

walmis•12/15/22, 9:25 AM

My pleasure

PPiNKSH!T Is it a viable strategy to make one profile each for helicopters, fly-by-wire & ...

walmis•12/15/22, 9:26 AM

Yeah, that's the idea. You can use the Export/Import functionality

Magpie•12/15/22, 9:26 AM

I might have to take out the leather because sometimes it pinches between the stick and the edge

Magpie•12/15/22, 9:26 AM

When I do an unloaded roll

Magpie•12/15/22, 9:27 AM

So dope tho

Magpie•12/15/22, 9:27 AM

I gotta learn what all the settings do

Magpie•12/15/22, 9:27 AM

Also what's the best trim setting for helicopters?

MMagpie Like in game the stick is vertical but in the simpit it's almost at the front st...

PiNKSH!T•12/15/22, 9:28 AM

would playing with the axis curve along with the endstop, you probs already done this tho?

MMagpie I might have to take out the leather because sometimes it pinches between the st...

walmis•12/15/22, 9:30 AM

You can adjust the calibration values so it reaches the edge a bit further from the physical edge

Wwalmis You can adjust the calibration values so it reaches the edge a bit further from ...

PiNKSH!T•12/15/22, 9:31 AM

oh you don't have to do this manually while calibrating? like with a physical endstop, that's so cool

walmis•12/15/22, 9:33 AM

Yeah so these adjust the physical to logical range of motion. Once the motor(raw_x/raw_y) reaches min/max value windows will see max deflection

walmis•12/15/22, 9:34 AM

in addition there's the endstops feature, that let's you customize the max deflections in the four quadrants even more

Wwalmis You can adjust the calibration values so it reaches the edge a bit further from ...

Magpie•12/15/22, 9:34 AM

Ahhhh yeah good idea

Magpie•12/15/22, 9:35 AM

Fark f14 was fun before, now it's unreal

PiNKSH!T•12/15/22, 9:45 AM

Sorry Walmis, but for the first time I plug the base in, do I just go to your website & then click update firmware? or can the same be done from the pc install version, I can't see the option?

walmis•12/15/22, 9:46 AM

Which version is installed currently?

Magpie•12/15/22, 9:48 AM

Ah don't worry I worked out the F5, I'd picked the ffb option in special but linear seems more accurate

Wwalmis Which version is installed currently?

PiNKSH!T•12/15/22, 10:02 AM

sorry I was playing with the stick like a child lol, the bases' is v1.0.12 looks like the current is v1.0.2-4 is that right?

walmis•12/15/22, 10:03 AM

No need to update, you have the latest

Wow, that's a lot to digest. I did update AMD's chipset driver to the latest and saw no improvement.

Similar Threads

Similar Threads

Similar Threads