VPforce Controls•3y ago

@walmis im seeing on !status that my s/n changed to a lower number, is this correct?😀 im expecting

@walmis im seeing on !status that my s/n changed to a lower number, is this correct?

im expecting it to just be a bot mix up though

Magpie•1/11/23, 12:59 AM

Yeah il2 crashes are legitimately scary now

Magpie•1/11/23, 1:00 AM

Hey does anyone find it weird when you take off force trim in the helis add it moves so freely? I feel like there should be some resistance but I really don't know

Magpie•1/11/23, 1:00 AM

Should I add 100 percent friction or something?

HHarq So some things arrived today.

PiNKSH!T•1/11/23, 1:18 AM

Congratulations m8! & Welcome to the RHINO Owners Club!

Rroller25.It would need to angle rearward. Looks like the virpil one angles forward. I thi...

PiNKSH!T•1/11/23, 1:20 AM

ahh ok, I'm not familiar with the extension up close, I wonder if things can be undone & turned around on the extension so it would work? It just caught my eye how similar the shape looked to the Virpil adapter

PPiNKSH!T Congratulations m8! & Welcome to the RHINO Owners Club!

Harq•1/11/23, 1:22 AM

Thanks! Now we will see if I actually get to use it this weekend.

HHarq Thanks! Now we will see if I actually get to use it this weekend. 😅

PiNKSH!T•1/11/23, 1:29 AM

Yeah m8, hope you're feeling better & can get your sim pit done asap so you can enjoy this awesome base!

roller25.•1/11/23, 2:47 AM

Just had a gimbal break... that'll learn me for using PLA

Off to order some PETG.

ddrake1984•1/11/23, 2:49 AM

just make it thicc

Harq•1/11/23, 3:03 AM

You can also "anneal" it in an oven. Makes the layer to layer strength higher at the expense of some shrinkage

Harq•1/11/23, 3:03 AM

if you can accept really long print times, you can also set your layer height to its absolute minimum. Does a similar thing

roller25.•1/11/23, 3:06 AM

Lasted longer than I expected actually... not bad for PLA.

PETG should last way longer...

SStoned Kakapo @walmis im seeing on !status that my s/n changed to a lower number, is this corr...

Boosted•1/11/23, 3:13 AM

happens when people back out

FlatSpin•1/11/23, 3:27 AM

what are the mechanicals of the rhino base made of?

VVulcan Does that happen with a cold dark pit spawn?

Merlins51•1/11/23, 3:50 AM

Yes. Full forward pitch at cold start also.

SStoned Kakapo @walmis im seeing on !status that my s/n changed to a lower number, is this corr...

TheZoq2•1/11/23, 7:39 AM

Mine has gone down a few too, perhaps people cancelling orders?

walmis•1/11/23, 7:46 AM

Yeah, it's to be expected

I was thinking what's the best approach to fill the "gaps", either:

Move all S\Ns to fill the gaps, like I did now.
Or move someone from the end of the queue - could be thought like lottery mode
option 2 would not be fair to those waiting, though.

Let me know what you guys think

Jaeger•1/11/23, 8:32 AM

Geez, there goes my lucky number and up comes a new, fine number, bringing me closer to the finish line. Guess I better get on to print my stick I want to put on that thing, otherwise it's here before I'm done

Vakarian•1/11/23, 8:39 AM

Yep. I did like that my previous # ended with 7, but hey, whatever brings me closer to the end of the queue I'll take it

VPforceBot•1/11/23, 11:15 AM

:package: RHINO #0035 Has Shipped!

DeltaVJ•1/11/23, 11:19 AM

Ye Old Grog•1/11/23, 11:28 AM

It is indeed looking like he has cleared some production bottlenecks

keem85•1/11/23, 2:39 PM

Is anyone in here using the "VPC SharKa-50 Control Panel" from Virpil as a jetfighter throttle?
I wonder how well it works for this purpose..
I'm trying to make room for a helicopter collective, and that's a difficult thing to do with a HOTAS throttle in the way.
And the "VPC SharKa-50 Control Panel" follows the collective up and down, pretty neat.

FlatSpin•1/11/23, 2:43 PM

it does if you purchase the vpc bracket

FFlatSpin it does if you purchase the vpc bracket

keem85•1/11/23, 2:47 PM

is that a bracket that moves all the throttle axis at the same time?

Kkeem85 is that a bracket that moves all the throttle axis at the same time?

FlatSpin•1/11/23, 2:54 PM

no, it just allows you to mount a control panel to the collective. https://virpil-controls.us.com/vpc-collective-base-control-panel-mount-adapter.html

VPC Collective Base - Control Panel Mount Adapter

★ Adjustable Mounting Point for your VPC Control Panel
★ Holds your VPC Control Panel at the Same Angle While the Collective is in use
★ High Quality All Metal Construction
★ Cable Guide Clips for a Tidy Cockpit
★ Conveniently Places the Control Panel Right by Your Hand

FFlatSpin no, it just allows you to mount a control panel to the collective. https://virp...

keem85•1/11/23, 2:56 PM

Ah, yes that was the one I was thinking about when asking the initial question.. I am thinking of using the control VPC panel #3 as a throttle for fighter jets when I'm not flying helicopters, and was wondering how well it works for the jets.. Also, come to mind is that perhaps the VPC panel #3 might be too low when collective is in a resting position

keem85•1/11/23, 2:56 PM

..meaning it would probably only be comfortable to use (within reach) when flying helicopters only.. Hmm

BBoosted happens when people back out

Stoned KakapoOP•1/11/23, 3:55 PM

Oh I figured it was either that or bot error. Just didn't think anyone would be canceling that early into the queue, but I suppose life happens!

Reed•1/11/23, 4:42 PM

https://tenor.com/view/bert-kreischer-i-am-the-machine-im-the-man-gif-16355416

Tenor

amadeus•1/11/23, 8:41 PM

loved that i just jumped up a couple spots ameowdab

keem85•1/11/23, 8:54 PM

Just got my neat virpil collective.
Anyone know why there are two usbs on the cable?

ddrake1984•1/11/23, 8:57 PM

One for the base, One for the grip

Dddrake1984 One for the base, One for the grip

keem85•1/11/23, 9:08 PM

Are they two seperate controllers in the joystick control-panel? Right now I don't have a grip, only the base

Dddrake1984 One for the base, One for the grip

blave549•1/11/23, 10:24 PM

I don't think that's correct. For just the base/grip, use the black connector. I think the red one is if you plug something into the Aux jack of the base (e.g. switch panel). I've never used the red connector as my Shark panel is connected directly via USB.

FlatSpin•1/11/23, 10:29 PM

the aux jack is for slaving panels I believe

FlatSpin•1/11/23, 10:29 PM

what does the manual say?

Bblave549 I don't think that's correct. For just the base/grip, use the black connector. I...

Anthony•1/11/23, 10:41 PM

Yup, there’s no external cable for the grip

TonyZ2525•1/12/23, 12:08 AM

@keem85 Red connector is for plugging into a second USB port for additional power if needed...it is not for data.

FFlatSpin what does the manual say?

keem85•1/12/23, 12:14 AM

manual says nothing about it, hence confusion.i have noidea

VPforceBot•1/12/23, 11:24 AM

:package: RHINO #0036 Has Shipped!

sliphavoc•1/12/23, 4:21 PM

Woo! Unless the serial numbers have changed, that one is mine!

Ssliphavoc Woo! Unless the serial numbers have changed, that one is mine!

walmis•1/12/23, 4:55 PM

Yours is 34

sliphavoc•1/12/23, 6:02 PM

Ah, ok I was starting to wonder, as I got the invoice and tracking number a couple days ago but the #36 hadn't been announced by the bot yet, I guess a couple people must have backed out. Too bad for them, and great for me! I'm really looking forward to having a FFB joystick again after so many years!

JJayPi This base is printed in PLA, 70% infill, 5 massive bottom and top layer. The scr...

roller25.•1/12/23, 10:45 PM

What settings did you use for printing PETG? I'm about to reprint the gimbal as mine finally failed (PLA+).

Ancient Guardian•1/13/23, 1:14 AM

!status

AAncient Guardian !status

VPforceBot•1/13/23, 1:14 AM

Hey @txgunslinger,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total

Ancient Guardian•1/13/23, 1:18 AM

VVPforceBot :package: **RHINO #0036** Has Shipped!

amadeus•1/13/23, 2:19 AM

Damn, these things flying off the shelf now!

Boosted•1/13/23, 2:39 AM

only 140 more to go, lol

@walmis im seeing on !status that my s/n changed to a lower number, is this correct?😀 im expecting

Similar Threads