Thanks! Now we will see if I actually get to use it this weekend. 😅
Thanks! Now we will see if I actually get to use it this weekend. 
PYeah m8, hope you're feeling better & can get your sim pit done asap so you can enjoy this awesome base!
RJust had a gimbal break... that'll learn me for using PLA 
Off to order some PETG.
Off to order some PETG.
Djust make it thicc
HYou can also "anneal" it in an oven. Makes the layer to layer strength higher at the expense of some shrinkage
Hif you can accept really long print times, you can also set your layer height to its absolute minimum. Does a similar thing
RLasted longer than I expected actually... not bad for PLA.
PETG should last way longer...
PETG should last way longer...
Bhappens when people back out
Fwhat are the mechanicals of the rhino base made of?
MYes. Full forward pitch at cold start also.
TMine has gone down a few too, perhaps people cancelling orders?
WYeah, it's to be expected 
I was thinking what's the best approach to fill the "gaps", either:
I was thinking what's the best approach to fill the "gaps", either:
- Move all S\Ns to fill the gaps, like I did now.
- Or move someone from the end of the queue - could be thought like lottery mode
option 2 would not be fair to those waiting, though.
JGeez, there goes my lucky number and up comes a new, fine number, bringing me closer to the finish line. Guess I better get on to print my stick I want to put on that thing, otherwise it's here before I'm done 
VYep. I did like that my previous # ended with 7, but hey, whatever brings me closer to the end of the queue I'll take it
V:package: RHINO #0035 Has Shipped!
D
YIt is indeed looking like he has cleared some production bottlenecks
KIs anyone in here using the "VPC SharKa-50 Control Panel" from Virpil as a jetfighter throttle?
I wonder how well it works for this purpose..
I'm trying to make room for a helicopter collective, and that's a difficult thing to do with a HOTAS throttle in the way.
And the "VPC SharKa-50 Control Panel" follows the collective up and down, pretty neat.
I wonder how well it works for this purpose..
I'm trying to make room for a helicopter collective, and that's a difficult thing to do with a HOTAS throttle in the way.
And the "VPC SharKa-50 Control Panel" follows the collective up and down, pretty neat.
Fit does if you purchase the vpc bracket
Kis that a bracket that moves all the throttle axis at the same time?
Fno, it just allows you to mount a control panel to the collective. https://virpil-controls.us.com/vpc-collective-base-control-panel-mount-adapter.html
★ Adjustable Mounting Point for your VPC Control Panel
★ Holds your VPC Control Panel at the Same Angle While the Collective is in use
★ High Quality All Metal Construction
★ Cable Guide Clips for a Tidy Cockpit
★ Conveniently Places the Control Panel Right by Your Hand
★ Holds your VPC Control Panel at the Same Angle While the Collective is in use
★ High Quality All Metal Construction
★ Cable Guide Clips for a Tidy Cockpit
★ Conveniently Places the Control Panel Right by Your Hand
KAh, yes that was the one I was thinking about when asking the initial question.. I am thinking of using the control VPC panel #3 as a throttle for fighter jets when I'm not flying helicopters, and was wondering how well it works for the jets.. Also, come to mind is that perhaps the VPC panel #3 might be too low when collective is in a resting position 
K..meaning it would probably only be comfortable to use (within reach) when flying helicopters only.. Hmm
SOh I figured it was either that or bot error. Just didn't think anyone would be canceling that early into the queue, but I suppose life happens!
R
Aloved that i just jumped up a couple spots 
KJust got my neat virpil collective.
Anyone know why there are two usbs on the cable?
Anyone know why there are two usbs on the cable?
DOne for the base, One for the grip
KAre they two seperate controllers in the joystick control-panel? Right now I don't have a grip, only the base
BI don't think that's correct. For just the base/grip, use the black connector. I think the red one is if you plug something into the Aux jack of the base (e.g. switch panel). I've never used the red connector as my Shark panel is connected directly via USB.
Fthe aux jack is for slaving panels I believe
Fwhat does the manual say?
AYup, there’s no external cable for the grip
T@keem85 Red connector is for plugging into a second USB port for additional power if needed...it is not for data.
Kmanual says nothing about it, hence confusion.i have noidea
V:package: RHINO #0036 Has Shipped!
SWoo! Unless the serial numbers have changed, that one is mine!
WYours is 34
SAh, ok I was starting to wonder, as I got the invoice and tracking number a couple days ago but the #36 hadn't been announced by the bot yet, I guess a couple people must have backed out. Too bad for them, and great for me! I'm really looking forward to having a FFB joystick again after so many years!
RWhat settings did you use for printing PETG? I'm about to reprint the gimbal as mine finally failed (PLA+).
A!status
VHey @txgunslinger,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
A!?
ADamn, these things flying off the shelf now!
Bonly 140 more to go, lol
VHey @skete,
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
So the last Shipped RHINO is #0036 on 2023-01-12
Average waiting time from preorder to shipped is 102 days, median is 110 days, max is 183 days
34 Rhinos are shipped in total
S@walmis probably last question until I get invoice 
but would I have to submit seperate order for the VKB and winwing adapter to be included?
but would I have to submit seperate order for the VKB and winwing adapter to be included?SOh and for the monstertech mounting plate, I'm assuming monstertech themselves will be selling it at some point?
JLayerheight 0.3mm, infill 100%, cant remember the temperature.
WYou can select those items during the ordering process You will get an auto notification once is your turn.
You will get an auto notification once is your turn.
Sthank you!