Yeah, I use the telem too, was just curious to know what default effects are enabled for the airfram

Yeah, I use the telem too, was just curious to know what default effects are enabled for the airframes and what the telem is providing as additional and could provide if configured

Dddrake1984 Help magpie with sabre

=RS= Hart•3/23/23, 5:24 AM

I don't use FFB yet, so I can't be much help there unfortunately

==RS= Hart I don't use FFB yet, so I can't be much help there unfortunately

ddrake1984OP•3/23/23, 5:26 AM

Well, the question was more around the sensations that are supposedly felt for the sabre

=RS= Hart•3/23/23, 5:26 AM

Ah, I'll have a sticky beak in the manual and see if I can find anything on it later

=RS= Hart•3/23/23, 5:26 AM

But I would imagine it'd feel lighter than the 15 due to better dampeners

=RS= Hart•3/23/23, 5:27 AM

Maybe stiffness around 0.95M in the roll

Dddrake1984 Well, the question was more around the sensations that are supposedly felt for t...

PiNKSH!T•3/23/23, 5:27 AM

I'd assume the flight controls are conected to the stick in a sabre so you should feel quite a lot from the sabre

==RS= Hart But I would imagine it'd feel lighter than the 15 due to better dampeners

ddrake1984OP•3/23/23, 5:27 AM

📃general

ddrake1984OP•3/23/23, 5:27 AM

Question was around coupled or decoupled hydraulics

Dddrake1984 https://discord.com/channels/965234441511383080/965234441511383083/1088288523548...

PiNKSH!T•3/23/23, 5:28 AM

this could be the reason too

=RS= Hart•3/23/23, 5:28 AM

Ok, I'll have a look tonight for a definitive answer

ddrake1984OP•3/23/23, 5:29 AM

Ill fly the sabre, but I know hart knows “people” and has access to “warthunder level documents”

PiNKSH!T•3/23/23, 5:31 AM

https://forum.dcs.world/topic/138153-missing-ffb-effect/

ED Forums

Missing FFB effect?

We can see the visual effect at high angle turns, stalls and spins but there is no ffb effect on joystick controller. You have added ffb effects on mig-15 and works great. Will you implement those effects on F-86 later? Thanks

PiNKSH!T•3/23/23, 5:32 AM

it's discussed here 2016, but have a look in the manual it has a few sections on the controls in the sabre

PiNKSH!T•3/23/23, 5:32 AM

looks like they are hydraulic but can be disengaged manually

CaptFlushGarden (John Liberto)•3/23/23, 5:50 AM

Hey guys! I fly mostly Dcs but lately flight simulator 2020 is getting some nice additions, i was wondering how much support there is for fs2020 for this FFB stick right now, for example force trim and such , is that in the VPForce software or does the simulator have to support that? I see some videos measuring force at around 5kg at the stick base , has anyone made measurements around the handle area where the hand would be? And lastly how long is the wait currently if an order was made today? Thank you :))

FlatSpin•3/23/23, 5:51 AM

!status

FFlatSpin !status

VPforceBot•3/23/23, 5:51 AM

Hey @.flatspin,
So the last Shipped RHINO is #0064 on 2023-03-21
Average waiting time from preorder to shipped is 141 days, median is 181 days, max is 209 days
64 Rhinos are shipped in total

Magpie•3/23/23, 5:57 AM

Sabre controls don't even tense up as you go fast

Magpie•3/23/23, 5:57 AM

Its kinda like the Hornet

Magpie•3/23/23, 6:24 AM

Except no fbw

PPiNKSH!T https://forum.dcs.world/topic/138153-missing-ffb-effect/

ddrake1984OP•3/23/23, 6:40 AM

Legend

ddrake1984OP•3/23/23, 6:41 AM

This is exactly what I was looking for

ddrake1984OP•3/23/23, 6:41 AM

@hart28 you have been replaced, hand in your Sabre card

PiNKSH!T•3/23/23, 6:43 AM

Umm has anyone tried the new EndStops?

PiNKSH!T•3/23/23, 6:44 AM

@walmis I had my suspicions about you, but this confirms it you deal in black magic

PPiNKSH!T Umm has anyone tried the new EndStops?

ddrake1984OP•3/23/23, 6:45 AM

Gonna try it after din dins

PiNKSH!T•3/23/23, 6:45 AM

there's a legit 'bump' at the endstops now!

ddrake1984OP•3/23/23, 6:45 AM

Ummm what now?

ddrake1984OP•3/23/23, 6:46 AM

Esplain

ddrake1984OP•3/23/23, 6:46 AM

I don’t want it to bounce

PiNKSH!T•3/23/23, 6:46 AM

my endstop power setting is @ 50%, but I get a noticeable feeling now hitting the end

Dddrake1984 I don’t want it to bounce

PiNKSH!T•3/23/23, 6:46 AM

nah it's more that the end feels defined now

ddrake1984OP•3/23/23, 6:47 AM

Fuck yeah

PiNKSH!T•3/23/23, 6:47 AM

feels less mushy at the end point of the axis

PiNKSH!T•3/23/23, 6:47 AM

so much better Walmis is a genius

Dddrake1984 @hart28 you have been replaced, hand in your Sabre card

=RS= Hart•3/23/23, 7:34 AM

VPforceBot•3/23/23, 11:23 AM

:package:

RHINO #0066 Has Shipped!

VVPforceBot :package: 🇨🇦 **RHINO #0066** Has Shipped!

Knight59•3/23/23, 1:24 PM

Woohoo! Looking forward to delivery!!

JJakeSixx33 | 744 |Great idea, I switched to a track ball mouse by the joystick after chasing too m...

Stoned Kakapo•3/23/23, 1:37 PM

Oh yeah trackball works amazingly too, I was actually going to go with that first

Dddrake1984 Yeah, I use the telem too, was just curious to know what default effects are ena...

Stoned Kakapo•3/23/23, 1:40 PM

Idk if this adds to your question, but modules like the harrier have no ffb profile, but the telem app breaths new life into it by adding stall effects, weapon effects and stuff. Only thing missing is the stick moving when trimming. I have the Sabre as well as all modules, but haven't tested it yet. Just f5, harrier, huey, apache , L39, spitfire, mossie

DDr. No Could I see side view pictures of a video of your chair and how you have it setu...

Stoned Kakapo•3/23/23, 1:44 PM

Not sure if these help. I don't have it attached to the chair, just the desk. I have a monstertech extension for panels for the bottom, to extend it down for when I use a stick extension. Just haven't added it to this yet.

SStoned Kakapo Not sure if these help. I don't have it attached to the chair, just the desk. I ...

PiNKSH!T•3/23/23, 1:47 PM

that stick in the background, where'd you get that? I think I saw them being made buy a guy a while back?

PPiNKSH!T that stick in the background, where'd you get that? I think I saw them being mad...

Stoned Kakapo•3/23/23, 1:49 PM

Yep Pawel! I got it from him on his simplesimpit page along with the chair. Initially I was hoping to add one of Walmis' kits to it, I couldn't see it really fitting. Maybe one day!

SStoned Kakapo Yep Pawel! I got it from him on his simplesimpit page along with the chair. Init...

GarrafaBr•3/23/23, 4:18 PM

I have ordered mine last week from Pawel too when I noticed the backorder and price of the monster tech chair. Also hoping for one day having the Mig stick integration with the Rhino.

Jon (Bounty_V)•3/23/23, 4:23 PM

https://tenor.com/view/star-wars-chancellor-dark-side-plan-evil-jedi-gif-7689991

Tenor

GGarrafaBr I have ordered mine last week from Pawel too when I noticed the backorder and pr...

Stoned Kakapo•3/23/23, 4:55 PM

I'm honestly still loving the chair! Especially at the price point. Very configurable, just need to get nuts and bolts. I may modify it at some point and use the steal frames to make an SJU-4, now that I have room for a full blown cockpit

GGarrafaBr I have ordered mine last week from Pawel too when I noticed the backorder and pr...

FlatSpin•3/23/23, 5:38 PM

what chair? Link?

FFlatSpin what chair? Link?

GarrafaBr•3/23/23, 6:07 PM

SIMple SIMpit, please google it, the first link takes you to his Facebook page. There you have his e-mail. I contacted him through it. He answered almost imediately. There are also some pictures of the Chair, stick, etc. on the Facebook page.I got to know about it thanks to RS ddrake1984 increadible discord Server. I am afraid to post a link here without asking Walmis.

GGarrafaBr SIMple SIMpit, please google it, the first link takes you to his Facebook page. ...

walmis•3/23/23, 6:44 PM

No worries

FFlatSpin what chair? Link?

GarrafaBr•3/23/23, 7:07 PM

https://www.google.com/url?sa=t&source=web&rct=j&url=https://m.facebook.com/SIMpleSIMpit/&ved=2ahUKEwjQhs7-0PL9AhVOS_EDHcbdDNwQFnoECBIQAQ&usg=AOvVaw3hxbA0Nkp8w8EonWjwYybi

Yeah, I use the telem too, was just curious to know what default effects are enabled for the airfram

Similar Threads