Hello, I am thinking about moding my rhino to make it quieter and cooler by using a permanantly runn

Hello, I am thinking about moding my rhino to make it quieter and cooler by using a permanantly running 140mm fan to cool it. Would it be possible to have this fan externaly mounted with a pipe to get the air from it to the case? Ideally making it going by the side under the stop button and the potentiometer

DeltaVJOP•9/14/23, 12:18 PM

goal is to have the case fan running less frequently

DDeltaVJ Hello, I am thinking about moding my rhino to make it quieter and cooler by usin...

blave549•9/14/23, 2:28 PM

I must not be doing something right... I've never heard the Rhino's fan(s?) turn on.

Bblave549 I must not be doing something right... I've never heard the Rhino's fan(s?) turn...

Number481•9/14/23, 2:33 PM

Do some hard maneuvering / extended high-g pulls with the g-effect enabled in TelemFFB. That'll get your fans singing.

DeltaVJOP•9/14/23, 2:42 PM

y have them in dogfight ( temps where high in france these day)

DeltaVJOP•9/14/23, 2:43 PM

did reach 65 degre on a motor yesterday with power reduction

DDeltaVJ y have them in dogfight ( temps where high in france these day)

blave549•9/14/23, 3:00 PM

Oh that's why. I don't dogfight at all. But maybe in DCS when I'm blowing sh8t up on the ground I'll get 'em humming.

TheZoq2•9/16/23, 12:31 PM

Or fly extended periods of time without trimming. I showed my parents and brother my setup a few days ago, they did not use trim and constantly countered the stick instead. That's like the first time i've heard the fans. Otherwise i only hear it in WW2 dogfights

Khangirey•9/17/23, 6:50 AM

Is the native FFB profile for the F5E rather weak, or is it just me? Idk if it is supposed to be that light (even with hydraulics). I can pull 8gs with fingertip pressure

AndyHill•9/17/23, 2:28 PM

I don't know about the F-5, but some planes do have weirdness in FFB, for example the F-16 feels softer on the elevator axis

AndyHill•9/17/23, 2:29 PM

some planes also have FFB settings in config files

MashedPotato•9/17/23, 3:01 PM

The F-16 being weird in ffb kind of makes sense though, especially the elevator axis being soft. The sim version we have is taking simulated FSSB controls, and meshing them in to traditional spring feel to give some sense of that (the elevator being softer than the ailerons), then trying to translate that in to FFB. Something is bound to get lost in translation/feel weird. Especially compared to non-FCS jets.

AAndyHill some planes also have FFB settings in config files

Khangirey•9/17/23, 11:10 PM

config files in dcs or for telemffb?

AndyHill•9/17/23, 11:11 PM

dcs

AndyHill•9/17/23, 11:11 PM

I think one of the mirages had extra configs

AndyHill•9/17/23, 11:12 PM

no idea about the 5 but you might want to take a look

DrQuinn•9/18/23, 12:36 AM

Update my firmware on my new Rhino and now the motors don't do anything and buttons on my grips don't work.

DrQuinn•9/18/23, 3:43 AM

Is there a way to re-load firmware or go back a version, right now it's completely unusable?

DDrQuinn Update my firmware on my new Rhino and now the motors don't do anything and butt...

walmis•9/18/23, 5:11 AM

Your Rhino had a pre-release firmware loaded that fixed the mentioned issues on the new board revision. I'll release v1.0.16 today, so should be all good afterwards.

DrQuinn•9/18/23, 5:22 AM

Thank you, also before I updated the firmware, I selected my VPC Alpha as the connected grip and it caused the stick to start oscillating back and forth.

walmis•9/18/23, 5:24 AM

Hard to say without looking at the settings

DrQuinn•9/18/23, 5:26 AM

default settings other than the grip change. I'll report how it works with new firmware.

slowmover•9/18/23, 5:21 PM

Hey mates question. is there a specific way i have to activate the rhino ffb?

slowmover•9/18/23, 5:22 PM

i mean fist connect usb then give power after open rhino programm?

walmis•9/18/23, 5:56 PM

Doesn't matter really, you can plug it in either order

Thraxas79•9/18/23, 6:05 PM

does the DIY kit comes with a TM/Virpil connector?

TThraxas79 does the DIY kit comes with a TM/Virpil connector?

Jon (Bounty_V)•9/18/23, 6:51 PM

https://discord.com/channels/965234441511383080/972180323787997255/972592222660857866 what it comes with

MashedPotato•9/18/23, 9:08 PM

Mine also came with a USB-B plug and iirc one other wiring harness pre made

AAndyHill I think one of the mirages had extra configs

Khangirey•9/18/23, 11:31 PM

could you show men an example path for the mirage files so I know what I'm looking for?

AndyHill•9/19/23, 12:04 AM

unfortunately no, I just heard of it from someone when I was looking for a similar thing for the f-16

slowmover•9/19/23, 9:03 AM

I want to use the hardware trim of VPforce board but I do not have a grip connected on the board. Is there any way to use it?

Sslowmover I want to use the hardware trim of VPforce board but I do not have a grip connec...

walmis•9/19/23, 9:23 AM

You can use the Loopback function and use any other controller connected to windows

Wwalmis You can use the Loopback function and use any other controller connected to wind...

slowmover•9/19/23, 10:28 AM

How I do that walmis?

Sslowmover How I do that walmis?

walmis•9/19/23, 11:45 AM

https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.1ksv4uv

Google Docs

VPforce Manual

VPforce RHINO FFB User Manual Version 0.1 (WIP) 03/08/2023 Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3 The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Up...

mark turner•9/19/23, 3:34 PM

Is the new firmware out? And if so, where do get it please?

Mmark turner Is the new firmware out? And if so, where do get it please?

walmis•9/19/23, 3:48 PM

You can find it here: https://vpforcecontrols.com/usb/rhino/

amadeus•9/19/23, 3:54 PM

@walmis I feel like I’ve noticed jolts every once in a while (don’t use hardware trimming though), but usually when I’m doing smaller movements and there are engine rumble effects on, I see you mentioned jolts fixed in the new firmware update but only with hardware trim

amadeus•9/19/23, 3:55 PM

Almost feels like there could be a series of wave effects that might be being applied and then they sorta hit a resonance point or something? Hard to describe tho

Aamadeus @walmis I feel like I’ve noticed jolts every once in a while (don’t use hardware...

walmis•9/19/23, 4:06 PM

The jolts happened on trim release on ah64 for example, but this might be something different as you describe.

walmis•9/19/23, 4:07 PM

Is it reproducible though

Vulcan•9/19/23, 4:15 PM

Still having an issue with axis inversion. My rhino is flipped to bring the stick closer to me. In vpforce configurator I checked both axis invert boxes. In DCS the Y axis is correct but I always have to invert the X axis in DCS. Any ideas why this is happening? Inverting in vpforce should invert both axis for DCS without having to set anything in DCS? In vpforce configurator both axis do appear inverted successfully when moving the stick.

Wwalmis Is it reproducible though 🙂

amadeus•9/19/23, 4:21 PM

It’s reproducible in the sense that I experience it, but there’s not a predefined way I can make it happen. Let me percolate on that, I might be able to grab logs, but if it’s in the middle of a long session, probably hard to identify

VVulcan Still having an issue with axis inversion. My rhino is flipped to bring the stic...

walmis•9/19/23, 6:18 PM

If the Windows game controllers show the correct axis behaviour, then the issue is probably in DCS configuration somewhere

Vulcan•9/19/23, 6:26 PM

Yeah windows shows correct as well... I wonder where in DCS it coudl be buggered up to cause every module to show the X axis is reversed

Wwalmis You can find it here: https://vpforcecontrols.com/usb/rhino/

Jaeger•9/19/23, 6:58 PM

Could you please elaborate on the suspend mode. When is it going to happen?

JJaeger Could you please elaborate on the suspend mode. When is it going to happen?

walmis•9/19/23, 7:00 PM

When you sleep or shutdown the PC

Wwalmis You can try setting Spring Filter to 8-10Hz, damper filter to 5 Hz and increasin...

Vulcan•9/19/23, 7:01 PM

Walmis, this issue is back after updating firmware from .14 to .16, any idea what changed? Following your advice i was able to stop the crazy oscillations but they are back and its very violent if it accidentally happens.

VVulcan Walmis, this issue is back after updating firmware from .14 to .16, any idea wha...

walmis•9/19/23, 7:01 PM

Can you show your current settings?

Vulcan•9/19/23, 7:07 PM

walmis•9/19/23, 7:09 PM

You can try increasing spring strength proportional damper to 100%-150%, Spring LPF can be reduced to 2-4Hz, and Damper LPF increased to 8-10Hz

Wwalmis When you sleep or shutdown the PC

Jaeger•9/19/23, 7:12 PM

Hmm does not turn off for me. Will check again tomorrow.

Hello, I am thinking about moding my rhino to make it quieter and cooler by using a permanantly runn

Similar Threads

Similar Threads

Similar Threads