WBtw, you haven't changed this in the configurator?
BWilldo. No.
BDoes it matter, whitch DIR to open the power shell?
WNo, just open as an administrator
BOk. Iβll try rebooting.
BGreat success!
MSorry if I am being dumb....see the new 1016 configurator software is out, but where do you get the firmware?
AThat same website where you download the configurator, acts as a firmware updater
AMthank you
Tin the showcase there are only the Board and the motors at the pictures, but at the FAQ it's mentioned "and wires for quick connection to test" so I would think all necessary connectors and wires are included but I'm not shure, even less after your answer
biggest problem would be the 5pin mini-din cable to connect the Warthog grip, because I could only find 4,6 and 9 pin to buy
biggest problem would be the 5pin mini-din cable to connect the Warthog grip, because I could only find 4,6 and 9 pin to buy
SThere you go.....
These two together and a soldering iron....you are good to go.
https://www.digikey.com/en/products/detail/cui-devices/MD-50PL100/500828
https://www.amazon.com/gp/product/B09SX5LBRG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
These two together and a soldering iron....you are good to go.
https://www.digikey.com/en/products/detail/cui-devices/MD-50PL100/500828
https://www.amazon.com/gp/product/B09SX5LBRG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Keszoox XH 2.54mm Male & Female JST Connector Kit with 22AWG Pre-Crimped Cables Wire,(Total 90Pcs) 2/3/4/5/6/7/8/9/10 Pin Housing JST Adapter Cable ConnectorοΌ5 Colors 150mmοΌ
Nhere's an additional source where I got mine... https://www.showmecables.com/by-category/connectors-adapters/din/5-pin-din
ShowMeCables
5 Pin DIN Connectors. Standard DIN and Mini DIN both available. Straight and panel-mount connector options. Available in 180Β°, 240Β°, 270Β°, and 360Β° styles in both male and female. Plastic and metal shell casing options. Same Day Shipping. Hassle-Free Returns. Lifetime Warranty. Live Support.
SI'm getting this error trying to update the firmware
Any idea ?
Any idea ?
SAh, I just saw the same problem was already mentioned above, I'll try the given solution tomorrow.
Awith the firmware/software update, are these the new recommended settings for LPF?
Aor are there some new defaults that would be recommended
VHi, I just received the winwing adapter. But the button presses are not detected. I checked multiple times and the connection with the base seems good to me.
however i tested putting the debug grip.
And i see FFs only
however i tested putting the debug grip.
And i see FFs only
Vas seen in this image
VI think i solved it...I had to unscrew the little spacer below the base of the adapter, maybe with it the pins didn't enter their holes.
BAny tips of how to wire the grip board ? There are 6pins on the grip board and 5 on the main board - which pin do I not wire up 
SSo I did a quick test after attaching the base, firmware up-to-date, calibration done, nothing else modified.
FFB activated in DCS, power on (big red know on).
20 cm extension and TM F-18 grip.
And I'm like : where is my force feedback ?
The forces are so light, it feels like my old base (Virpil T-50CM2) with the lightest springs and tension tuned to the minimum...
Turned the black knob all the way to the right, it's slightly better but so so light compared to any real plane I ever flew (from small to big ones, props and jets).
So what did I miss ?
I tested with the Spitfire, Tomcat, Mirage F1, Harrier.
The Spit and the Tomcat are nice, but the forces are too light, and not increasing/decreasing with an increase/decrease of speed (the stick should become stiffer the faster you go and should become more "sluggish" when you slow down)
FFB activated in DCS, power on (big red know on).
20 cm extension and TM F-18 grip.
And I'm like : where is my force feedback ?
The forces are so light, it feels like my old base (Virpil T-50CM2) with the lightest springs and tension tuned to the minimum...
Turned the black knob all the way to the right, it's slightly better but so so light compared to any real plane I ever flew (from small to big ones, props and jets).
So what did I miss ?
I tested with the Spitfire, Tomcat, Mirage F1, Harrier.
The Spit and the Tomcat are nice, but the forces are too light, and not increasing/decreasing with an increase/decrease of speed (the stick should become stiffer the faster you go and should become more "sluggish" when you slow down)
οΏ½Great! Is it also recognizing the grip now?
οΏ½Try some of the other profiles πknowledge-baseRhino Profile Sharing (though you probably have to recalibrate for your stick) . Primarily you need to increase Friction, Inertia, and Damper to get a heavier feeling. Feel free to experiment.
B@subsonic1748 Thanks a lot
Npost screenshots of your configurator settings (both settings and effects tabs)
S@walmis maybe pin the diagram in support sir?
SI'm not in front of the computer right now, but I did not modify anything there, so it's the "factory settings"
SI'll have a look, thanks
WBy my calculations, you should get ~2.2kg of force at max with a 40cm lever (15cm Rhino + 20cm ext + grip) .
You can stiffen up the the spring by reducing the throw range by using "axis scaling" feature or using spring mapping tool.
Formula: F_kg = 0.9 / lever in metersYou can stiffen up the the spring by reducing the throw range by using "axis scaling" feature or using spring mapping tool.
Mupdated firmware and software, set grip to the realsimulator 64 button, still not seeing the hat presses light up in the vpforce software
VIt was not easy as to plug it in...but now it works
WInteresting, will have to double check.
Mmight have something to do with how RS sends those inputs to windows. They come off a second virtual device
WBut if the presses were visible with the debug grip profile, it should work. Can you recheck the debug grip profile which bytes change on button presses?
Myeah, one sec
M[11:05:48.706] FF FF FF FF FF FF FF FB 04 00 00 00 00 00 00 00
[11:05:48.908] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.109] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.309] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.511] FF FF FF FF FF FF FF F7 04 00 00 00 00 00 00 00
[11:05:49.712] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.912] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.114] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.315] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.516] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.717] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.917] FF FF FF FF FF FF FF FD 04 00 00 00 00 00 00 00
[11:05:48.908] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.109] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.309] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.511] FF FF FF FF FF FF FF F7 04 00 00 00 00 00 00 00
[11:05:49.712] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:49.912] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.114] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.315] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.516] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.717] FF FF FF FF FF FF FF FF 04 00 00 00 00 00 00 00
[11:05:50.917] FF FF FF FF FF FF FF FD 04 00 00 00 00 00 00 00
MThe FB, F7, and FD are the 3 hats
Min debug, the grip constantly sends the FF, not sure if that's just the poll rate, or what
Hhi @walmis , i am still loosing ffb. But at least sometimes it seems to be only the spring force while the others are still ok. Do you have further Ideas?
BI have been experiencing something that seems to be specific to the aircraft that I'm using (Cowansim MD500E). TelemFFB throws exceptions pretty much every time I fly, and it seems to happen whenever TelemFFB attempts to generate an effect. It does not do this with the Cabri G2, which works fine. Here's the log... I'm assuming I need to add something to the config.user.ini but I don't know what.
MD500E_TelemFFB_log.txt3.95KB
N@_blave could be any number of things that aren't implemented properly in that aircraft, or in a way that TelemFFB isn't expecting (or a legit TelemFFB bug...)
But at the very least you should add the aircraft to your config as a helicopter:
But at the very least you should add the aircraft to your config as a helicopter:
B@walmis Could have the wiring diagram for the 32 input Shift register to βMain Boardβ - I used the diagram given by @subsonic1748 but no joy.
BWoops have to rewire, thanks
Sahhh sorry, missed that you were using the shift reg
B@subsonic1748 no probs buddy, just a quick swap of the pins and got it working 
CWhat's the purpose of the 7pin Aux switch connector out of interest?
