so its like a physical disconnect from the spring system? Is it a "pull-and-hold" action on the le
so its like a physical disconnect from the spring system? Is it a "pull-and-hold" action on the lever until you get the stick where you want?
Ndifferent from standard trim controls.. this behaves more like a helicopter force-trim system
LKind of, I think i can record a video for you tomorrow
LThis is a different glider type, the difference is, that on this one you move a trim lever. To do that on the LS4 you pull the trim lever and then the trim moves to the stick position and stays there when you release it.
LYou have to ignore that the trim lever moves a bit with the stick, that is because it wasnt tighted properly in this clip
Ninteresting.. I think the best we could approximate in TelemFFB is a button binding (could use the paddle on grip) that removes only the elevator spring force and re-centers it when released.
JWhat would this cable be called (specs), so I can get a replacement. The Y axis stopped working suddenly for no reason. First thing that crossed my mind that it would be a loose connector, so I opened up the stick, but all was seated. With fiddeling at the cable, the motor came alive. So I placed it that it works, closed the stick up and went flying. Net though, it won't stay for long, so I better get me a spare.
SYea, those connectors are fragile.
Get yourself this kit...
https://www.amazon.com/gp/product/B08T89ZK2Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Get yourself this kit...
https://www.amazon.com/gp/product/B08T89ZK2Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
PH 2.0 Connector Pre-Crimped Cable Kit Compatible with JST-PH 2.0mm for Battery JJRC H36 Blade Inductrix Tiny Whoop Arduino mkr1010 MKR Zero and MKR Vidor 4000 (Female&Male Connector&Wire)
HI know this is a very belated response, but I've been busy moving into a new house and job, so I've not had time to mess around with this.
I finally pulled the port out and took a look, and I don't see any obvious issues or damage, but the stick is recognized when I plug it in with the port removed, so I can only assume it was an issue with the solder points on the port that's not visible (maybe a cold joint?)
I finally pulled the port out and took a look, and I don't see any obvious issues or damage, but the stick is recognized when I plug it in with the port removed, so I can only assume it was an issue with the solder points on the port that's not visible (maybe a cold joint?)
HI'll put it back together and if needed, I'll resolder the connections and see if that fixes the issue.
JIf you disconnect the USB while loaded into DCS. Is there a way to have DCS find the Rhino again? Rescan devices didn't work.
DTrim function doesn't seem to work, doesn't move with assigned buttons, but will move with a non-assigned button.
WHardware trim? If so do you have the latest .16-1 configurator version?
GWhat about activating Enable Hotplug, the button next to the rescan devices you mention from Keybinding screen? Sometimes when I loose the ffb in DCS I just have to re-slot.
G
JI didn't try to reslot. I'll try that thanks.
N@walmis - Are the kits on waiting lists or just the full base? Do the USB electronics encode the stick positions or are separate sensors needed? I saw there are some potentiometer inputs - trim or control inputs? Are those compatible with Hall effect sensors too if they are control inputs? Looks like a really great sim accessory!
WThe kits don't have a waiting list and are quick to ship. Motors act like stick position sensors, so no additional sensors are needed. The pot inputs have various functions assignable via UI and can be axis control inputs. Hall sensor 0-3.3V will work too.
NThank you, @walmis! Are the middle size motors enough to stand up a full length stick? Just PVC with a Warthog grip on it about 2 feet long.
FIs there a way to correct for crosstalk for certain gimbal designs?
N@walmis - sent you a PM about my order…
SHi! Just recieved mine - super impressed with build quality. However, when I try to update firmware via https://vpforcecontrols.com/usb/rhino/ I get an error: "Error: NetworkError: Failed to execute 'claimInterface' on 'USBDevice': Unable to claim interface." Any ideas anyone? Googling doesn't make me wiser...
DI think it's an error on their end, mine is also doing the same.
SAh, ok... We'll have to wait for a fix then...
PAnyone able to use force trim with UH60 dcs mod? Can’t get it to hold new stick position when trimming
PFound answer, using hardware trim in the config tool
Ahttps://canary.discord.com/channels/965234441511383080/968208779084701716/1151153966483243030 here's the fix to the
unable to claim interface bug, in general def worth searching the server
TProbably the stupidest question yet, but I'm currently playing FS22, using twin stick for crane controls. But the Rhino doesn't work there, if I put it on raising/lowering the crane with Y+ and Y- respectively, all it does is raise Y+ even if I don't physically manipulate the stick?
BI flew that 'hawk once, and put it aside. To me the flight model is.... Lacking. Severely so. Hopefully it will improve.
VWhat is the diameter of vkb adapter metal part?
SYour Google-fu is strong, oh great @amadeus ! I thank you a thousand times, that worked!
ANpnp! I just spend too much time in this server 
LWhat is suitable resistance to potentiometers? And which ratio is in a rhinos timing pulleys?
V1:6.2 ratio belt drive
from manual https://discord.com/channels/965234441511383080/1091401951951982602
from manual https://discord.com/channels/965234441511383080/1091401951951982602
BI just got done flying the excellent freeware A-29B for DCS (https://github.com/luizrenault/a-29b-community). I have an entry for it in the TelemFFB user config file if that matters... I just looked at the log after completing a flight, and there are mulitiple "simconnect?" messages interspersed with DCS effects -- e.g.:
2023-09-26 10:54:14.881 - INFO - Destroying effect 9 (Sine) ("prop_rpm0-2")
2023-09-26 10:54:14.882 - INFO - Destroying effect 10 (Sine) ("prop_rpm1-1")
2023-09-26 10:54:14.883 - INFO - Destroying effect 11 (Sine) ("prop_rpm1-2")
2023-09-26 10:54:23.339 - INFO - Trying SimConnect
2023-09-26 10:54:23.743 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:33.743 - INFO - Trying SimConnect
2023-09-26 10:54:34.146 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:44.146 - INFO - Trying SimConnect
2023-09-26 10:54:44.550 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:54.551 - INFO - Trying SimConnect
2023-09-26 10:54:54.954 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:58.72 - INFO - Telemetry Timeout, stopping effects
2023-09-26 10:54:58.72 - INFO - Stop effect 12 (Constant) ("aoa")
2023-09-26 10:54:58.73 - INFO - Stop effect 14 (Constant) ("runway0")
2023-09-26 10:54:58.74 - INFO - Stop effect 15 (Constant) ("runway1")
2023-09-26 10:54:58.75 - INFO - Stop effect 17 (Constant) ("elev_droop")
2023-09-26 10:55:04.956 - INFO - Trying SimConnect
2023-09-26 10:55:05.359 - ERROR - Failed to open SimConnect, is Flight Simulator running?
Shouldn't the app stop looking for MSFS when DCS is active? This doesn't seem to hurt anything but it seems inefficient to my noob programmer wannabe self...
2023-09-26 10:54:14.881 - INFO - Destroying effect 9 (Sine) ("prop_rpm0-2")
2023-09-26 10:54:14.882 - INFO - Destroying effect 10 (Sine) ("prop_rpm1-1")
2023-09-26 10:54:14.883 - INFO - Destroying effect 11 (Sine) ("prop_rpm1-2")
2023-09-26 10:54:23.339 - INFO - Trying SimConnect
2023-09-26 10:54:23.743 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:33.743 - INFO - Trying SimConnect
2023-09-26 10:54:34.146 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:44.146 - INFO - Trying SimConnect
2023-09-26 10:54:44.550 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:54.551 - INFO - Trying SimConnect
2023-09-26 10:54:54.954 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:58.72 - INFO - Telemetry Timeout, stopping effects
2023-09-26 10:54:58.72 - INFO - Stop effect 12 (Constant) ("aoa")
2023-09-26 10:54:58.73 - INFO - Stop effect 14 (Constant) ("runway0")
2023-09-26 10:54:58.74 - INFO - Stop effect 15 (Constant) ("runway1")
2023-09-26 10:54:58.75 - INFO - Stop effect 17 (Constant) ("elev_droop")
2023-09-26 10:55:04.956 - INFO - Trying SimConnect
2023-09-26 10:55:05.359 - ERROR - Failed to open SimConnect, is Flight Simulator running?
Shouldn't the app stop looking for MSFS when DCS is active? This doesn't seem to hurt anything but it seems inefficient to my noob programmer wannabe self...
NNo.. its like the little engine that could.. it never stops waiting for a connect event from MSFS if it is enabled in the config
Nthe log message is unnecessary.. unless you actually Are trying to fly MSFS in which case it could be indicative of a problem.
SAvast keeps insisting there is a virus in TelemFFB latest version. False positive i guess?
LIt's 29 mm. And thanks for a good laugh 
(your username) 
(your username) 
VThanks and you're welcome I guess 
MWas suggested I post here. I’m not sure if I’m doing something wrong but I’m really only feeling the constant effects I put in and some of the more haptic effects from telemFFB or something. I fly spit, 109 and F-1 mostly, which is what I’ve been testing in. The only non stick vibration-type effects I’ve felt have been on the f-1 while I’m taking off (stick moves around as I get up to speed) which was super cool. Posting in my settings. I fly DCS only
M
M
M
M
M
TUnsure about DCS but I get a lot of the same in many IL-2 Great Battles aircraft, like when expending all airspeed in a vertical climb, the ailerons, X axis, go limp, but Y axis, the elevators/pitch, still has strength in it so I can't gauge it as well.
Was never an issue with the MSFFB2, and I've adjusted periodic, spring, dampner etc to try to isolate the issue, alas no go.
The Spitfire MKVb is the best one so far, probably the best FFB I've felt in IL-2 Great Battles on the Rhino, on the other side of the spectrum there's the Nieuport 17, Camel, DR.1, P-51 etc, elevator, Y axis, feels like the same constant pressure going top speed as it does at stall speed, with only rumble/rattle/shake as warning when I stall and no airspeed queue's at all.
War Thunder's FFB is non existent apart from arbitrarily shaking at the weirdest of times, while IL-2 CloD (once FF files are modified with Fedit) and IL-2 1946 so far has hands down the best over-all feel for all their aircraft.
Was never an issue with the MSFFB2, and I've adjusted periodic, spring, dampner etc to try to isolate the issue, alas no go.
The Spitfire MKVb is the best one so far, probably the best FFB I've felt in IL-2 Great Battles on the Rhino, on the other side of the spectrum there's the Nieuport 17, Camel, DR.1, P-51 etc, elevator, Y axis, feels like the same constant pressure going top speed as it does at stall speed, with only rumble/rattle/shake as warning when I stall and no airspeed queue's at all.
War Thunder's FFB is non existent apart from arbitrarily shaking at the weirdest of times, while IL-2 CloD (once FF files are modified with Fedit) and IL-2 1946 so far has hands down the best over-all feel for all their aircraft.
NI dont see anything abnormal in your settings. You haven't said what your expectations are yet, only that you aren't achieving them.
Taking the TelemFFB effects module out of the equation...
The first indication that DCS is "talking FFB" to your device is that the stick will go limp as soon as DCS starts. When you load into a module, depending on the type of module and how it implements FFB, the stick will take on those characteristics. If you jump into a warbird cold and dark or sitting at the end of the runway ready to take off, your stick should be flopping around. If you hot-start in the air, there will be spring tension.
If you jump in a FBW jet, the stick will just a have a constant spring force.
Taking the TelemFFB effects module out of the equation...
The first indication that DCS is "talking FFB" to your device is that the stick will go limp as soon as DCS starts. When you load into a module, depending on the type of module and how it implements FFB, the stick will take on those characteristics. If you jump into a warbird cold and dark or sitting at the end of the runway ready to take off, your stick should be flopping around. If you hot-start in the air, there will be spring tension.
If you jump in a FBW jet, the stick will just a have a constant spring force.
FHello i notice that my Y axis band is a bit looser than x axis band is there a way to tight it or is this going it’s suppose to be?
MSry. Yes. I’m expecting to experience more and stronger FFB effects as I fly around. Especially having to pull harder on the stick to get out of a dive.
MI just experimented with turning up the periodic effects and turning off the constant effects. Turning off the constant effect seemed to help. In the 109 I was seeing a marked different between on the ground and flying at speeds. However the pitch behaviours is still very different than I expected. I a dive there is more resistance in a roll than in pitching (pull out of the dive).