The kits don't have a waiting list and are quick to ship. Motors act like stick position sensors, so

The kits don't have a waiting list and are quick to ship. Motors act like stick position sensors, so no additional sensors are needed. The pot inputs have various functions assignable via UI and can be axis control inputs. Hall sensor 0-3.3V will work too.

N7783L•9/25/23, 1:18 PM

Thank you, @walmis! Are the middle size motors enough to stand up a full length stick? Just PVC with a Warthog grip on it about 2 feet long.

Wwalmis The kits don't have a waiting list and are quick to ship. Motors act like stick ...

Fierce_Fire•9/25/23, 1:58 PM

Is there a way to correct for crosstalk for certain gimbal designs?

N7783L•9/25/23, 2:56 PM

@walmis - sent you a PM about my order…

Sharkku•9/25/23, 10:21 PM

Hi! Just recieved mine - super impressed with build quality. However, when I try to update firmware via https://vpforcecontrols.com/usb/rhino/ I get an error: "Error: NetworkError: Failed to execute 'claimInterface' on 'USBDevice': Unable to claim interface." Any ideas anyone? Googling doesn't make me wiser...

DrQuinn•9/25/23, 10:45 PM

I think it's an error on their end, mine is also doing the same.

Sharkku•9/25/23, 10:56 PM

Ah, ok... We'll have to wait for a fix then...

papiplanes•9/26/23, 12:11 AM

Anyone able to use force trim with UH60 dcs mod? Can’t get it to hold new stick position when trimming

papiplanes•9/26/23, 12:22 AM

Found answer, using hardware trim in the config tool

amadeus•9/26/23, 1:45 AM

https://canary.discord.com/channels/965234441511383080/968208779084701716/1151153966483243030 here's the fix to the unable to claim interfaceunable to claim interface bug, in general def worth searching the server

ToreDL87•9/26/23, 12:41 PM

Probably the stupidest question yet, but I'm currently playing FS22, using twin stick for crane controls. But the Rhino doesn't work there, if I put it on raising/lowering the crane with Y+ and Y- respectively, all it does is raise Y+ even if I don't physically manipulate the stick?

Ppapiplanes Anyone able to use force trim with UH60 dcs mod? Can’t get it to hold new stick ...

blave549•9/26/23, 4:35 PM

I flew that 'hawk once, and put it aside. To me the flight model is.... Lacking. Severely so. Hopefully it will improve.

Voi_Paavo•9/26/23, 4:42 PM

What is the diameter of vkb adapter metal part?

Aamadeus https://canary.discord.com/channels/965234441511383080/968208779084701716/115115...

Sharkku•9/26/23, 4:45 PM

Your Google-fu is strong, oh great @amadeus ! I thank you a thousand times, that worked!

SSharkku Your Google-fu is strong, oh great @amadeus ! I thank you a thousand times, that...

amadeus•9/26/23, 5:11 PM

Npnp! I just spend too much time in this server

LLv34_Vellu•9/26/23, 5:38 PM

What is suitable resistance to potentiometers? And which ratio is in a rhinos timing pulleys?

LLLv34_Vellu What is suitable resistance to potentiometers? And which ratio is in a rhinos ti...

Voi_Paavo•9/26/23, 5:48 PM

1:6.2 ratio belt drive
from manual https://discord.com/channels/965234441511383080/1091401951951982602

blave549•9/26/23, 6:02 PM

I just got done flying the excellent freeware A-29B for DCS (https://github.com/luizrenault/a-29b-community). I have an entry for it in the TelemFFB user config file if that matters... I just looked at the log after completing a flight, and there are mulitiple "simconnect?" messages interspersed with DCS effects -- e.g.:

2023-09-26 10:54:14.881 - INFO - Destroying effect 9 (Sine) ("prop_rpm0-2")
2023-09-26 10:54:14.882 - INFO - Destroying effect 10 (Sine) ("prop_rpm1-1")
2023-09-26 10:54:14.883 - INFO - Destroying effect 11 (Sine) ("prop_rpm1-2")
2023-09-26 10:54:23.339 - INFO - Trying SimConnect
2023-09-26 10:54:23.743 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:33.743 - INFO - Trying SimConnect
2023-09-26 10:54:34.146 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:44.146 - INFO - Trying SimConnect
2023-09-26 10:54:44.550 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:54.551 - INFO - Trying SimConnect
2023-09-26 10:54:54.954 - ERROR - Failed to open SimConnect, is Flight Simulator running?
2023-09-26 10:54:58.72 - INFO - Telemetry Timeout, stopping effects
2023-09-26 10:54:58.72 - INFO - Stop effect 12 (Constant) ("aoa")
2023-09-26 10:54:58.73 - INFO - Stop effect 14 (Constant) ("runway0")
2023-09-26 10:54:58.74 - INFO - Stop effect 15 (Constant) ("runway1")
2023-09-26 10:54:58.75 - INFO - Stop effect 17 (Constant) ("elev_droop")
2023-09-26 10:55:04.956 - INFO - Trying SimConnect
2023-09-26 10:55:05.359 - ERROR - Failed to open SimConnect, is Flight Simulator running?

Shouldn't the app stop looking for MSFS when DCS is active? This doesn't seem to hurt anything but it seems inefficient to my noob programmer wannabe self...

Number481•9/26/23, 6:05 PM

No.. its like the little engine that could.. it never stops waiting for a connect event from MSFS if it is enabled in the config

Number481•9/26/23, 6:07 PM

the log message is unnecessary.. unless you actually Are trying to fly MSFS in which case it could be indicative of a problem.

Sharkku•9/26/23, 6:38 PM

Avast keeps insisting there is a virus in TelemFFB latest version. False positive i guess?

VVoi_Paavo What is the diameter of vkb adapter metal part?

LeLv30_Superbus•9/26/23, 7:06 PM

It's 29 mm. And thanks for a good laugh

(your username)

LLeLv30_Superbus It's 29 mm. And thanks for a good laugh 😄 (your username) 🇫🇮

Voi_Paavo•9/26/23, 7:10 PM

Thanks and you're welcome I guess

Mack•9/26/23, 7:20 PM

Was suggested I post here. I’m not sure if I’m doing something wrong but I’m really only feeling the constant effects I put in and some of the more haptic effects from telemFFB or something. I fly spit, 109 and F-1 mostly, which is what I’ve been testing in. The only non stick vibration-type effects I’ve felt have been on the f-1 while I’m taking off (stick moves around as I get up to speed) which was super cool. Posting in my settings. I fly DCS only

Mack•9/26/23, 7:21 PM

Mack•9/26/23, 7:22 PM

Mack•9/26/23, 7:23 PM

Mack•9/26/23, 7:26 PM

Mack•9/26/23, 7:26 PM

ToreDL87•9/26/23, 7:27 PM

Unsure about DCS but I get a lot of the same in many IL-2 Great Battles aircraft, like when expending all airspeed in a vertical climb, the ailerons, X axis, go limp, but Y axis, the elevators/pitch, still has strength in it so I can't gauge it as well.
Was never an issue with the MSFFB2, and I've adjusted periodic, spring, dampner etc to try to isolate the issue, alas no go.
The Spitfire MKVb is the best one so far, probably the best FFB I've felt in IL-2 Great Battles on the Rhino, on the other side of the spectrum there's the Nieuport 17, Camel, DR.1, P-51 etc, elevator, Y axis, feels like the same constant pressure going top speed as it does at stall speed, with only rumble/rattle/shake as warning when I stall and no airspeed queue's at all.
War Thunder's FFB is non existent apart from arbitrarily shaking at the weirdest of times, while IL-2 CloD (once FF files are modified with Fedit) and IL-2 1946 so far has hands down the best over-all feel for all their aircraft.

Number481•9/26/23, 7:45 PM

I dont see anything abnormal in your settings. You haven't said what your expectations are yet, only that you aren't achieving them.

Taking the TelemFFB effects module out of the equation...

The first indication that DCS is "talking FFB" to your device is that the stick will go limp as soon as DCS starts. When you load into a module, depending on the type of module and how it implements FFB, the stick will take on those characteristics. If you jump into a warbird cold and dark or sitting at the end of the runway ready to take off, your stick should be flopping around. If you hot-start in the air, there will be spring tension.

If you jump in a FBW jet, the stick will just a have a constant spring force.

Fer•9/26/23, 7:45 PM

Hello i notice that my Y axis band is a bit looser than x axis band is there a way to tight it or is this going it’s suppose to be?

NNumber481 I dont see anything abnormal in your settings. You haven't said what your expec...

Mack•9/26/23, 7:56 PM

Sry. Yes. I’m expecting to experience more and stronger FFB effects as I fly around. Especially having to pull harder on the stick to get out of a dive.

Mack•9/26/23, 7:58 PM

I just experimented with turning up the periodic effects and turning off the constant effects. Turning off the constant effect seemed to help. In the 109 I was seeing a marked different between on the ground and flying at speeds. However the pitch behaviours is still very different than I expected. I a dive there is more resistance in a roll than in pitching (pull out of the dive).

amadeus•9/26/23, 9:32 PM

fwiw -- sometimes when i launch DCS, just no FFB works at all from the game (telem will work fine, but for some reason the game just decides not to send me any FFB). usually i have to just kill it and re-launch it

amadeus•9/26/23, 9:32 PM

very unclear why/when/how that happens, but it does happen sometimes

amadeus•9/26/23, 9:32 PM

i.e. -- if you notice DCS not giving you any FFB, try just a simple restart of the game and see if anything changes

Aamadeus i.e. -- if you notice DCS not giving you any FFB, try just a simple restart of t...

Mack•9/26/23, 9:34 PM

Thanks! I’ll def keep my eye on this

Mack•9/26/23, 9:35 PM

Can anyone confirm if it’s supposed to be like this: that in a high speed dive (700kph in a 109) there is more resistance in the stick to roll than there is to pitch up?

MMack Can anyone confirm if it’s supposed to be like this: that in a high speed dive (...

MashedPotato•9/26/23, 10:31 PM

That makes sense from a physics standpoint, the ailerons are father out from the CG and smaller surfaces. The elevator is centerline and larger. The elevator will also maintain effectiveness through a pull, where one wing will stall sooner in a roll

Aamadeus fwiw -- sometimes when i launch DCS, just no FFB works at all from the game (tel...

MashedPotato•9/26/23, 10:31 PM

This also happens to me once in a while, also just restart to fix

amadeus•9/26/23, 10:33 PM

glad to know I'm not the only one

AndyHill•9/27/23, 1:15 AM

I had this happen when I ran the dedicated server as another instance of DCS, if I run it after I start the main instance, it takes over the ffb - of course giving you no effects since the server doesn't climb into a plane. That's a pretty fringe use case, though.

amadeus•9/27/23, 1:16 AM

Lmao yeah

Fer•9/27/23, 1:44 AM

Hey @walmis my y axis band is a bit looser that x axis band, is this suppose to be like this ?? Or can it be tighten ?

5earchkaine•9/27/23, 1:19 PM

Hi, just got my Rhino and wow what a beast, compared to the Gunfighter base! Just mounted it on my rig. Now I'm trying to get it working with FS2020. For the FFB, do I still need XPForce or does is work with TelemFFB? And does some have some good baseline settings for FS2020? thanks

55earchkaine Hi, just got my Rhino and wow what a beast, compared to the Gunfighter base! Jus...

blave549•9/27/23, 3:15 PM

You need TelemFFB. The configuration app... configures the Rhino. TelemFFB provides effects for DCS and to a lesser degree, MSFS (which does not have any native FFB).

There are several aircraft in the config file for MSFS, but I had to add an entry into the MSFS helicopters section of the user config file to get the Cowansim MD500E to work right -- otherwise TelemFFB would stop working almost immediately.

BTW this apparently isn't obvious at first but don't edit the config.ini file -- copy it to config.user.ini and edit that. And -- don't forget to copy that somewhere so that it doesn't get blown away when you install a newer version and delete the old directory... I do not recommend just copying a new version into the same directory that the older version is at, although someone here does that with no issues in this particular case. It's just not a good idea in general for apps/data (e.g. community aircraft, scenery, etc.).

Hextopia•9/27/23, 3:20 PM

Quick question, but where is the intended connection point for the mount plate shown here: https://discord.com/channels/965234441511383080/1118790519103967242/1118790519103967242

Hextopia•9/27/23, 3:21 PM

(Where does this plate mount to the MT chair/cockpit setup)

HHextopia Quick question, but where is the intended connection point for the mount plate s...

blave549•9/27/23, 3:25 PM

Bblave549 You need TelemFFB. The configuration app... configures the Rhino. TelemFFB provi...

5earchkaine•9/27/23, 3:26 PM

Thank you, working now, need to play with the settings now

The kits don't have a waiting list and are quick to ship. Motors act like stick position sensors, so

Similar Threads