I dont see anything abnormal in your settings. You haven't said what your expectations are yet, onl

I dont see anything abnormal in your settings. You haven't said what your expectations are yet, only that you aren't achieving them.

Taking the TelemFFB effects module out of the equation...

The first indication that DCS is "talking FFB" to your device is that the stick will go limp as soon as DCS starts. When you load into a module, depending on the type of module and how it implements FFB, the stick will take on those characteristics. If you jump into a warbird cold and dark or sitting at the end of the runway ready to take off, your stick should be flopping around. If you hot-start in the air, there will be spring tension.

If you jump in a FBW jet, the stick will just a have a constant spring force.

Fer•9/26/23, 7:45 PM

Hello i notice that my Y axis band is a bit looser than x axis band is there a way to tight it or is this going it’s suppose to be?

NNumber481 I dont see anything abnormal in your settings. You haven't said what your expec...

Mack•9/26/23, 7:56 PM

Sry. Yes. I’m expecting to experience more and stronger FFB effects as I fly around. Especially having to pull harder on the stick to get out of a dive.

Mack•9/26/23, 7:58 PM

I just experimented with turning up the periodic effects and turning off the constant effects. Turning off the constant effect seemed to help. In the 109 I was seeing a marked different between on the ground and flying at speeds. However the pitch behaviours is still very different than I expected. I a dive there is more resistance in a roll than in pitching (pull out of the dive).

amadeus•9/26/23, 9:32 PM

fwiw -- sometimes when i launch DCS, just no FFB works at all from the game (telem will work fine, but for some reason the game just decides not to send me any FFB). usually i have to just kill it and re-launch it

amadeus•9/26/23, 9:32 PM

very unclear why/when/how that happens, but it does happen sometimes

amadeus•9/26/23, 9:32 PM

i.e. -- if you notice DCS not giving you any FFB, try just a simple restart of the game and see if anything changes

Aamadeus i.e. -- if you notice DCS not giving you any FFB, try just a simple restart of t...

Mack•9/26/23, 9:34 PM

Thanks! I’ll def keep my eye on this

Mack•9/26/23, 9:35 PM

Can anyone confirm if it’s supposed to be like this: that in a high speed dive (700kph in a 109) there is more resistance in the stick to roll than there is to pitch up?

MMack Can anyone confirm if it’s supposed to be like this: that in a high speed dive (...

MashedPotato•9/26/23, 10:31 PM

That makes sense from a physics standpoint, the ailerons are father out from the CG and smaller surfaces. The elevator is centerline and larger. The elevator will also maintain effectiveness through a pull, where one wing will stall sooner in a roll

Aamadeus fwiw -- sometimes when i launch DCS, just no FFB works at all from the game (tel...

MashedPotato•9/26/23, 10:31 PM

This also happens to me once in a while, also just restart to fix

amadeus•9/26/23, 10:33 PM

glad to know I'm not the only one

AndyHill•9/27/23, 1:15 AM

I had this happen when I ran the dedicated server as another instance of DCS, if I run it after I start the main instance, it takes over the ffb - of course giving you no effects since the server doesn't climb into a plane. That's a pretty fringe use case, though.

amadeus•9/27/23, 1:16 AM

Lmao yeah

Fer•9/27/23, 1:44 AM

Hey @walmis my y axis band is a bit looser that x axis band, is this suppose to be like this ?? Or can it be tighten ?

5earchkaine•9/27/23, 1:19 PM

Hi, just got my Rhino and wow what a beast, compared to the Gunfighter base! Just mounted it on my rig. Now I'm trying to get it working with FS2020. For the FFB, do I still need XPForce or does is work with TelemFFB? And does some have some good baseline settings for FS2020? thanks

55earchkaine Hi, just got my Rhino and wow what a beast, compared to the Gunfighter base! Jus...

blave549•9/27/23, 3:15 PM

You need TelemFFB. The configuration app... configures the Rhino. TelemFFB provides effects for DCS and to a lesser degree, MSFS (which does not have any native FFB).

There are several aircraft in the config file for MSFS, but I had to add an entry into the MSFS helicopters section of the user config file to get the Cowansim MD500E to work right -- otherwise TelemFFB would stop working almost immediately.

BTW this apparently isn't obvious at first but don't edit the config.ini file -- copy it to config.user.ini and edit that. And -- don't forget to copy that somewhere so that it doesn't get blown away when you install a newer version and delete the old directory... I do not recommend just copying a new version into the same directory that the older version is at, although someone here does that with no issues in this particular case. It's just not a good idea in general for apps/data (e.g. community aircraft, scenery, etc.).

Hextopia•9/27/23, 3:20 PM

Quick question, but where is the intended connection point for the mount plate shown here: https://discord.com/channels/965234441511383080/1118790519103967242/1118790519103967242

Hextopia•9/27/23, 3:21 PM

(Where does this plate mount to the MT chair/cockpit setup)

HHextopia Quick question, but where is the intended connection point for the mount plate s...

blave549•9/27/23, 3:25 PM

Bblave549 You need TelemFFB. The configuration app... configures the Rhino. TelemFFB provi...

5earchkaine•9/27/23, 3:26 PM

Thank you, working now, need to play with the settings now

Bblave549 Click to see attachment

Hextopia•9/27/23, 3:27 PM

Is that along the right side rail and thus at an offset?

Hextopia•9/27/23, 3:28 PM

Though I guess it looks like the spacing on those fasteners means you can put it on any of the 8020 tubes in the assembly

HHextopia Is that along the right side rail and thus at an offset?

blave549•9/27/23, 3:29 PM

does this help? (BTW I just noticed that the profile that the bottom plate is mounted to is drooping. Not sure why, but I'll be trying to correct that.)

Hextopia•9/27/23, 3:31 PM

That makes more sense

blave549•9/27/23, 3:31 PM

Here's another angle

Hextopia•9/27/23, 3:32 PM

I currently have mine mounted to a large sheet of thick, quality plywood, but it's a bit cumbersome to move around, so I was looking into getting a dedicated seat setup for it and wondering if mounting it to the frame was worth the hassle

Hextopia•9/27/23, 3:33 PM

How much flex is there with high stick forces?

blave549•9/27/23, 3:33 PM

one unanticipated benefit of having mine mounted the way it is, is that the vibrations are transmitted through the profile frame and thus in the seat. It's pretty cool. I have an NLR HF8 haptic seat pad but decided it was redundant.

I don't fly combat much, and so I don't yank and bank nearly as much as some people. In fact, I've never heard the Rhino's fans come on. But then, I mostly fly helicopters.

Hextopia•9/27/23, 3:34 PM

I'm also running a 20cm extension, so it looks like floor mounting might be my only option to keep the relative height correct...

Bblave549 one unanticipated benefit of having mine mounted the way it is, is that the vibr...

Hextopia•9/27/23, 3:35 PM

I do like the idea of having the transducer push through the stick since it's mounted to the frame though

HHextopia I'm *also* running a 20cm extension, so it looks like floor mounting might be my...

blave549•9/27/23, 3:36 PM

Have you considered running it without the extension? I have two 100mm ones but they're in the closet. Almost purely by accident, the Rhino went on my setup perfectly without having to mess with anything...

Hextopia•9/27/23, 3:36 PM

I'd actually bought a small transducer just for the rhino itself, but that would be an easier solution

Bblave549 Have you considered running it without the extension? I have two 100mm ones but ...

Hextopia•9/27/23, 3:36 PM

I've flown without them, and the extra throw is really useful for aircraft sensitive to control inputs

Hextopia•9/27/23, 3:37 PM

I'd honestly really like an even longer extension, but I'd need more powerful motors and a riser for the seat to go much higher

Hextopia•9/27/23, 3:38 PM

Looking at the setup, I think it may be possible to mount this thing to the underside of the frame below the front of the seat

blave549•9/27/23, 3:39 PM

yeahbut I think the Rhino has a lot more throw than regular joystick bases. I actually have mine limited via the Rhino config tool's Endstops setting (to 40%).

Hextopia•9/27/23, 3:42 PM

It's definitely got a lot of throw

Hextopia•9/27/23, 3:43 PM

(And one complaint I have is the absolute edges of that throw aren't a perfect square/rectangle, they've got some deadspots around the perimeter that really need to be limited in the software)

Hextopia•9/27/23, 3:44 PM

But I definitely want something more similar to my experience flying a few aircraft/gliders where you've got a lot of range of motion to enable fine movements of control surfaces with gross movements of the stick. Really makes formation flying, etc. much easier to do when you can make minor corrections that are actually minor

Hextopia•9/27/23, 3:45 PM

Like, my current setup has a throw that's getting close to a UH-60's cyclic range of motion

Hextopia•9/27/23, 3:45 PM

But it still needs another shorter extension to really get there

HHextopia (And one complaint I have is the absolute edges of that throw aren't a perfect s...

blave549•9/27/23, 3:50 PM

You've flown a UH-60?

Hextopia•9/27/23, 3:51 PM

Never flown one, but I've spent a lot of time in the cockpit/flying on them/working the flight controls

Hextopia•9/27/23, 3:52 PM

In a previous life I did maintenance on them, now I just do flight test on a variety of different aircraft

HHextopia Though I guess it looks like the spacing on those fasteners means you can put it...

Hextopia•9/27/23, 4:03 PM

This is sort of what I was thinking might be feasible. Blue being a purpose machined plate mounted to the underside of that frame rail under the seat

Hextopia•9/27/23, 4:04 PM

Might need to make it an L bracket though, since two bolts might not be sufficient to hold the plate in place without it bending

HHextopia Might need to make it an L bracket though, since two bolts might not be sufficie...

Fierce_Fire•9/27/23, 4:24 PM

that entirely depends on the thickness of the plate. I assume 4 to 6mm to be plenty strong steel, alu might need a little more, havent calculated that correctness though

HHextopia This is sort of what I was thinking might be feasible. Blue being a purpose mac...

blave549•9/27/23, 5:29 PM

I was concerned about the plate thickness, but Walmis said it was plenty and that turns out to be true.

I didn't realize this until I took the first pic above that the profile that the Rhino plate attaches to is sagging (it's not the plate). I just tried to tighten everything up but it's still doing it. I'm contemplating putting something under it that sits on the floor to support it (not that it matters, other than visually and to my OCD's insistence on orthogonality).

But I think you need a short piece of profile that mounts to the front of the bottom-most profile in the picture (you marked the latter red) and then the Rhino plate would attach to that. IOW, what I did but centered on the frame rather than sidestick-style. Maybe that's what you are intending but if not, I would not mount the plate directly to the top of the profile. It might be fine, but I do think the plate needs some support for at least part of its front-to-back length, as I have done. Either that, or put something under it for support that goes to the floor.

Fer•9/28/23, 1:22 AM

Hello I checked my rhino and the y axis band is a bit looser than the x axis, is that normal ?

Spatz•9/28/23, 9:10 AM

Guys do many of you use the Throw Limiter Adapter? If so, at what angle and do we really need it?

I dont see anything abnormal in your settings. You haven't said what your expectations are yet, onl

Similar Threads

Similar Threads

Similar Threads