OK, I will run the app on my laptop with 64bit for setup the rhino. Can I run the Rhino "standalone"

OK, I will run the app on my laptop with 64bit for setup the rhino. Can I run the Rhino "standalone" (without app) on WinXP/FS9 afterwards? (all settings of my Simpit are WinXP based and I am quite happy with the system)

Ffiddle11 OK, I will run the app on my laptop with 64bit for setup the rhino. Can I run th...

walmis•9/30/23, 12:07 PM

Yeah, once you store the configuration the app is not required.

HHextopia They both handle trim the exact same

walmis•9/30/23, 3:00 PM

Can confirm, on the Ka50 it works identically

Ffiddle11 Is there a way to run the Rhino with Windows XP Professional SP3? Currently I ge...

Red Magic•10/1/23, 1:03 AM

a living and breathing fossil of a computer

Red Magic•10/1/23, 1:03 AM

did you consider donating that to a museum? Imagine the payout

Red Magic•10/1/23, 1:03 AM

Ssmitty Click to see attachment

Right Rudder - Left Stick•10/1/23, 5:35 PM

can that be back driven?

RRight Rudder - Left Stick can that be back driven?

smitty•10/1/23, 6:19 PM

its not a worm gear so it works both ways

Bard_the_Bowman•10/1/23, 8:13 PM

Might be a dumb question but does TelemFFB work with other devices like MS FFB2?

BBard_the_Bowman Might be a dumb question but does TelemFFB work with other devices like MS FFB2?

walmis•10/2/23, 6:17 AM

Out of the box - no, but it's possible to port it

Number481•10/2/23, 8:56 PM

I don’t even fly the Apache (yet)..but I have a feeling this is going to end up on my collective when it’s available. Will require some minor changes (to my collective base) to account for the length of the grip.

https://www.helisimmer.com/news/teaser-virpil-ah-64-apache-collective-photos

HeliSimmer

Teaser: VIRPIL sent us some AH-64 collective photos • HeliSimmer.com

The company gave us access to 3 teaser pics of the upcoming collective for the Apache.

Spatz•10/2/23, 9:37 PM

I hope its under 300 Eur

TrigaNZ•10/2/23, 10:47 PM

I hope they do a Kiowa grip.

blave549•10/2/23, 10:50 PM

This is what I said on the Noobifier hardware channel about the new Virpil grip: "It's slightly infuriating how they seem to've intentionally left the collective base out of focus. That's my main question about it -- are they making a new base with a shorter tube so that the whole thing isn't so long?"

I may stick with my Hawk grip. It's pretty nice, albeit without the backlighting (other than on one button).

Now if they made an AH-64 TEDAC (front seat targeting control) gizmo, that would have my complete attention. EDIT: and then 30 seconds later I came across this https://www.helisimmer.com/news/komodo-simulations-first-images-video-tedac-ah-64-apache

HeliSimmer

Komodo Simulations shows first images (and video) of the AH-64 TEDA...

The Komodo TEDAC has been on pre-order for some time, but this is the first time we have seen photos of the product.

Anthony•10/2/23, 11:03 PM

Komodo is top of the line prices, bottom of the barrel quality

Anthony•10/2/23, 11:04 PM

Don’t even think about touching that crap. Paid over £500 for a B8 cyclic and base only to find out that the rubbish was lower quality than my old Saitek X52

Number481•10/2/23, 11:13 PM

Yeah..I saw the concerns about the length/weight of the Apache grip relating to their current collective bases. Not a concern for my VPforce FE Collective though

AAnthony Komodo is top of the line prices, bottom of the barrel quality

Fr4Ged•10/2/23, 11:19 PM

stuff looks like it has been 3d printed with some average materials but costs like injection molded stuff or even more.

FFr4Ged stuff looks like it has been 3d printed with some average materials but costs li...

Anthony•10/2/23, 11:27 PM

That’s because it is

Anthony•10/2/23, 11:28 PM

It’s not some factory, it’s just a random bloke 3D printing it in his garage

blave549•10/2/23, 11:37 PM

So I've had some dealings with Komodo, although I never ended up with any of their products. The dude is a stand-up guy (and last I heard, full-time medevac heli pilot). I know that some of his earlier filament-based 3d printed parts were not what we get from Virpil/etc. but the video and images of the TEDAC lead me to believe that he's either doing resin-based printing now, or using some other technique. I just sent him a query about exactly that.

I would encourage folks to not be so critical of what is (again, the last time I heard) a one-man shop, that is passionate about aviation and flight simming. And -- show me a TEDAC that doesn't cost multiple thousands of dollars... I don't think it exists (I've researched it extensively).

ddrake1984•10/3/23, 6:38 AM

was there an infographic on this discord that showed the different pedals and how they moved in operation? I can't seem to find that picture anywhere

Jon (Bounty_V)•10/3/23, 8:19 AM

I don't recall seeing such a pic in this server but if it is its really old from last year

Bblave549 So I've had some dealings with Komodo, although I never ended up with any of the...

Anthony•10/3/23, 8:19 AM

He’s running a for profits business, not doing favours for friends. If the quality stinks despite being nearly as expensive as a Rhino… that warrants a scolding tbh

Jon (Bounty_V)•10/3/23, 8:23 AM

I wonder if Virpil will make apache cyclic too

Anthony•10/3/23, 8:23 AM

Being a great guy doesn’t compensate for expensive products which don’t live up to even average market standards

Jon (Bounty_V)•10/3/23, 8:23 AM

They've yet to make a grip based on a cyclic AFAIK, not that any of their grips are bad as cyclics

Jon (Bounty_V)•10/3/23, 8:25 AM

Unfortunately on my current cockpit I don't have a way to collective so I won't be getting one anytime soon

Anthony•10/3/23, 8:26 AM

I’d wager a cyclic is next on the list for VPC

VPforceBot•10/3/23, 10:44 AM

:package:

RHINO #0208 Has Shipped!

Jon (Bounty_V)•10/3/23, 1:20 PM

To echo the quality comment, quality and durability is what most people want out of a product. Especially if it is expensive. Sure, if its cheap, then you get what you pay for and you kind of have to expect that going in, but for something expensive even by higher end flight sim hardware standards? Naturally you want and expect high quality.

Bob Bushman•10/3/23, 2:03 PM

I have a tek creations panel i bought second hand for $300, its not very old. But i pretty much have to use tape to make sure it holds together.

Originally they charge $800 before shipping and tax for what is basically a few buttons and pots, that gets noisy, so needs deadzones and smoothing, and dont match up anywhere close to the markings.

Its quality is overall below my winwing first gen take off and combat panels that they charge a third for the two.

WhereNoLarkFlew•10/3/23, 4:54 PM

!status

WWhereNoLarkFlew !status

VPforceBot•10/3/23, 4:54 PM

Hey @wherenolarkflew,
So the last Shipped RHINO is #0208 on 2023-10-03
Average waiting time from preorder to shipped is 205 days, median is 219 days, max is 292 days
206 Rhinos are shipped in total

blave549•10/4/23, 10:36 PM

/gush_on I just did a short flight around my environs (KSJC, with the stock photogrammetric scenery) in the payware Shrike MD530 helicopter. I tell ya, we are living in a golden age of flight simulation -- with VR, MSFS's scenery and flight modeling, high performance PCs, high quality flight hardware and especially something like the Rhino, we are lucky folks (apologies to the folks that are still waiting on their Rhinos).

The HW force trim feature of TelemFFB is just golden, at least for helis -- it really feels like what I remember from back when I was flying the real dealz. Thanks to @walmis and crew -- again! I've been doing this hobby for a long time (but I'm not sure if F-15 Strike Eagle on the Commodore 64 counts

) and it's just worlds and worlds ahead of what we had just ten years ago. /gush_off

Popo•10/5/23, 7:58 AM

use dm for that

kotori87•10/5/23, 8:00 AM

oops

Bblave549 /gush_on I just did a short flight around my environs (KSJC, with the stock phot...

Spatz•10/5/23, 8:24 AM

Is there somewhere an tutorial what every setting is doing in the software - so far I understand that we have two software available for the Rhino - vpforce software and the TelemFFB - would love to see an insight for every setting and the FFB it provides

VPforceBot•10/5/23, 9:00 AM

:package:

RHINO #0210 Has Shipped!

VPforceBot•10/5/23, 10:46 AM

:package:

RHINO #0211 Has Shipped!

Kkotori87 oops

blave549•10/5/23, 2:52 PM

Have you seen the manual? https://t.ly/w7c-R

Google Docs

VPforce Manual

VPforce RHINO FFB User Manual Version 0.2 (WIP) 2023-10-02 Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3 The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Up...

PPopo use dm for that

blave549•10/5/23, 11:06 PM

Are you referring to my post?

TTrigaNZ Ooo, another Kiwi….Watch out for the tax man

nz aviator•10/6/23, 2:32 AM

Still waiting on that bill haha

nz aviator•10/6/23, 2:35 AM

Anyone have an stl for the rhino grip adapter so I can make a grip attachment?

Bblave549 Are you referring to my post?

Popo•10/6/23, 4:57 AM

Nope, there was a guy trying to use a bot

exil35•10/6/23, 9:59 PM

Noob question here...
Is the Rhino or any software the Rhino uses capable of reading out LVars from MSFS?
The reason i am asking is the following. The current H145 (and the soon to be released H160) use LVars to define the control positions. Now when you are flying with the autopilot, it will move the stick around depending on the regime (move the stick to the left for a left bank for example). Is there any possible solution to achieve this with the Rhino? Any help is appreciated!

Eexil35 Noob question here... Is the Rhino or any software the Rhino uses capable of rea...

Number481•10/6/23, 10:49 PM

unfortunately it's nowhere near as simple as all that.
TelemFFB, the software that drives FFB for the Rhino with MSFS uses a library called pysimconnect. Pysimconnect, as the name implies, is a python library for subscribing to simconnect data. This is how we retrieve all the telemetry needed to generate the FFB stick forces as well as the other effects. AFAIK it does not support LVARs, and one would need to develop or make use of another interface library to do so.

All of that said, even if one did get a stream of the LVAR data working, there are further challenges that make something like this exceedingly difficult (or very messy) to pull off. This is the same challenge with implementing any sort of trim following movement to the stick in MSFS.

The fundamental problem is that when you move the stick (either with your hand, or by using the motors), that "moves the axis" since it is bound in MSFS. So if you try to purposefully move the centerpoint of the stick in response to trim telemetry data, not only is the sim adjusting the trim, but the stick is moving the elevator (or aileron, or rudder) axis at the same time so you end up with very coarse trim adjustments.

Number481•10/6/23, 10:50 PM

The Brunner software "solves" this by advising you to edit the aircraft config files in the MSFS file structure to render the trim inactive in the aircraft. By doing this, they remove the double-input problem but that is horribly messy.

They also advise that you do not bind the axis' in MSFS. They send the axis position via simconnect. This is what you would need to do in your example of "follow the autopilot". You would need to do that so that you can stop sending the stick position when the autopilot is engaged (so MSFS doesn't know the stick is moving), otherwise the AP will disengage because MSFS thinks the stick is moving.

That is also messy since simconnect data is sent/received at an interval equal to your framerate. That's fine if you are running 100+fps in pancake mode, but becomes a problem of poor control input resolution if you are in VR running at 30FPS and have a drop down to 20.

Sorry for the novel length response.. I've put a lot of thought into how to add trim following and/or autopilot following capabilities into TelemFFB in a clean way and have come up empty.

TTrigaNZ Ooo, another Kiwi….Watch out for the tax man

plehmann•10/7/23, 12:00 AM

ditto here - chch

Pplehmann ditto here - chch

plehmann•10/7/23, 12:02 AM

novel length replies as just why I'm here- helps me understand some of the odd behaviour I see in sim- thanks for the effort

NNumber481 unfortunately it's nowhere near as simple as all that. TelemFFB, the software ...

exil35•10/7/23, 7:19 AM

Hey, thank you so much for the very detailed and valueable answer!

While i won't say that it still should be possible there might be some ways to still do it i think. A nice guy over at the HPG discord build his own FFB stick using stepper motors and hall sensors amd using FSUIPC and a own lua script to get it done.

The LVars are in fact retrievable using another python based library.

Maybe i misunderstand you here, but the trims in helicopters work different than in airliners for example. In helicopters the AP actually drives the stick to the physical position needed to attain a specific attitude. This is the exact same position you need to move the stick to when handflying to achieve the same attitude. So i don't see the double input problem here or am i missing something?

Thanks again for taking your time and the detailed explanation!

OK, I will run the app on my laptop with 64bit for setup the rhino. Can I run the Rhino "standalone"

Similar Threads

Similar Threads

Similar Threads