Done- and thank you- this now sorted. One final issue and if you have a solution to this one I will

Done- and thank you- this now sorted. One final issue and if you have a solution to this one I will be in Huey heaven. I am using a Vipril Z extension to position my grip in the right place. This means the weight of the grip (Alpha Prime) casues a slight downward pull on the base. Is it possible to zero the Rhino on this point? I.e. the rest position that comes into being with the sag casued from the grip?

TTBH10Coy Done- and thank you- this now sorted. One final issue and if you have a solution...

Number481•11/14/23, 5:55 PM

set up the balance springs settings per this: 📃general then turn on 'adaptive recentering' for additional centering help (I use the z-extension with a heavy alpha prime grip..)

NNumber481 did you maybe copy the exe to your destkop instead of a shortcut?

JakeSixx33 | 744 |•11/14/23, 6:31 PM

Thank you both for responding. I must have copied the executable. I made a new shortcut and all is well. Thanks again.

audax•11/15/23, 8:34 PM

Tiny problem with the Rhino and the KA-50: I set it to "INSTANT TRIM (DEFAULT)" as per the manual. I enabled force feedback in the misc options.
Whenever I trim in the KA-50, I get a force to the center of the stick while I press the trimmer.

audax•11/15/23, 8:39 PM

Same problem in the UH-1

audax•11/15/23, 8:46 PM

I accidently set the knob to y-trim.

audax•11/15/23, 8:54 PM

Well… my x-axis is inverted. But when i set the axis acutally to "inverted" in the config, then the force feedbac effects are the wrong way around.

Aaudax Well… my x-axis is inverted. But when i set the axis acutally to "inverted" in t...

Number481•11/15/23, 8:56 PM

dont invert anything in DCS.. if youve mounted your base backwards (buttons away from you), invert the axes in configurator.. leave them normal in DCS

audax•11/15/23, 8:57 PM

I didn't mount the base backwards and my y axis works fine. I did not invert the axis in the config nor in DCS.

audax•11/15/23, 8:57 PM

I'll check with another aircraft

audax•11/15/23, 8:58 PM

the gamecontroller settings in windows also show the same problem.

audax•11/15/23, 8:58 PM

So at least it's independent of DCS

audax•11/15/23, 8:58 PM

I reset the config and the problem remains

Number481•11/15/23, 8:59 PM

the proper default inversion settings in configurator are, X=inverted checked, Y= not checked

audax•11/15/23, 8:59 PM

Oh. It didn't set it like that when I reset the config!

Number481•11/15/23, 9:00 PM

you want to load the default.vpconf thats in the install directory

audax•11/15/23, 9:01 PM

Having inverted as the default is… weird

AndyHill•11/15/23, 9:04 PM

the configurator can't really know which way you have the base installed

Number481•11/15/23, 9:07 PM

This is the answer.. sure walmis could invert the inversion logic in the code to make the rhino motor orientation correct with both set to non-inverted.. but then your motors would both be working in different directions if you had them sitting on the table getting ready for a DIY build.

audax•11/15/23, 9:13 PM

I was just confused by the "reset config" button

Vakarian•11/15/23, 10:47 PM

So, I think I'm the first one here to do this. Was doing some circuits with the F-15E, on landing during aerobraking this happened

@walmis what's the quickest way to order new adapter?

VVakarian So, I think I'm the first one here to do this. Was doing some circuits with the ...

ddrake1984•11/15/23, 11:35 PM

Not the first

ddrake1984•11/15/23, 11:35 PM

ddrake1984•11/15/23, 11:36 PM

This was mine

DeltaVJ•11/16/23, 12:32 AM

where can I have a spare one so I have stock before it breaks?

ddrake1984•11/16/23, 12:41 AM

I bought a spare one

VVakarian So, I think I'm the first one here to do this. Was doing some circuits with the ...

walmis•11/16/23, 6:28 AM

You can use the order form for either the full adapter or you can write that you want spare parts.
P.S. I've improved that screw part a while ago so hopefully there will be no more breakage reports

ddrake1984•11/16/23, 6:32 AM

Mine wasnt a result of screws tho

ddrake1984•11/16/23, 6:32 AM

ddrake1984•11/16/23, 6:32 AM

No screws reinforce this bit

Dddrake1984 Mine wasnt a result of screws tho

walmis•11/16/23, 6:39 AM

That broken bit is the screw

ddrake1984•11/16/23, 6:42 AM

Ah, I call it a collar

a screw for me is

ddrake1984•11/16/23, 6:42 AM

Dddrake1984 Ah, I call it a collar 😅 a screw for me is

PiNKSH!T•11/16/23, 6:43 AM

something else comes to mind for me when I think of a screw

DxMarovitch•11/16/23, 10:46 AM

Hey there, I am considering getting the HPG H160 for MSFS, I was wondering if that in conjunction with your TelemFFB software, would work with a MS Sidewinder FFB2? Thanks in advance for any info

DDxMarovitch Hey there, I am considering getting the HPG H160 for MSFS, I was wondering if th...

walmis•11/16/23, 10:51 AM

Hi, in the current state it will not work with other devices other than the Rhino, but in theory it's possible to port the hardware layer of telemFFB to other hardware.

Wwalmis Hi, in the current state it will not work with other devices other than the Rhin...

DxMarovitch•11/16/23, 10:55 AM

Gotcha, thank you for the info!

Jehly•11/17/23, 1:56 AM

Not sure if anyone else has experienced this, but over the last FFB update or two I noticed it flips my rudder input and there's no way for me to re-bind or invert it from inside DCS. If I close TelemFFB, works normal.

Jehly•11/17/23, 1:56 AM

Have you experienced this, @Number481?

JJehly Not sure if anyone else has experienced this, but over the last FFB update or tw...

Number481•11/17/23, 1:57 AM

Talking fixed wing? Very high probability there are bugs in the rudder trim following feature that I haven't found yet.

Number481•11/17/23, 1:59 AM

try

pedal_trimming_enabled = false

pedal_trimming_enabled = false

... I had no problems with it in any of the module testing I did.. but I certainly did not test all modules and didn't actually fly around much

Jehly•11/17/23, 2:03 AM

I'm flying specifically A10CII

Jehly•11/17/23, 2:03 AM

Is that in the pedals.ini file

JJehly I'm flying specifically A10CII

Number481•11/17/23, 2:06 AM

It’s in the default config but you can add it in your userconfig

MashedPotato•11/17/23, 2:12 AM

Is there any way to add support for the new F-15E setting that gives full deflection at half forward stick (a la the real jet). Like add a soft/hard stop to the rhino when it detects you're in an F-15E and that option is checked

MMashedPotato Is there any way to add support for the new F-15E setting that gives full deflec...

Number481•11/17/23, 2:14 AM

Not to detect the setting in DCS, but you could create a configurator profile for the 15 and load it dynamically when in the f15 via TelemFFB. Would be up to you to ensure the setting is enabled in the sim.

NNumber481 It’s in the default config but you can add it in your userconfig

Jehly•11/17/23, 2:14 AM

Confirmed. This was the issue.

Jehly•11/17/23, 2:14 AM

Set to false and no inverted pedals.

JJehly Confirmed. This was the issue.

Number481•11/17/23, 2:15 AM

Hmm. I’ll take a look. The a10 was one I did test but…

NNumber481 Not to detect the setting in DCS, but you could create a configurator profile f...

MashedPotato•11/17/23, 2:17 AM

Pretend like I'm a dumb dumb, is there a guide to actually setting this up?

MMashedPotato Pretend like I'm a dumb dumb, is there a guide to actually setting this up?

Number481•11/17/23, 2:23 AM

This is the second time I’ve referenced this message. I should probably put it in the manual

📃general

Done- and thank you- this now sorted. One final issue and if you have a solution to this one I will

Similar Threads