So, I think I'm the first one here to do this. Was doing some circuits with the F-15E, on landing du

So, I think I'm the first one here to do this. Was doing some circuits with the F-15E, on landing during aerobraking this happened

@walmis what's the quickest way to order new adapter?

VVakarian So, I think I'm the first one here to do this. Was doing some circuits with the ...

ddrake1984•11/15/23, 11:35 PM

Not the first

ddrake1984•11/15/23, 11:35 PM

ddrake1984•11/15/23, 11:36 PM

This was mine

DeltaVJ•11/16/23, 12:32 AM

where can I have a spare one so I have stock before it breaks?

ddrake1984•11/16/23, 12:41 AM

I bought a spare one

VVakarian So, I think I'm the first one here to do this. Was doing some circuits with the ...

walmis•11/16/23, 6:28 AM

You can use the order form for either the full adapter or you can write that you want spare parts.
P.S. I've improved that screw part a while ago so hopefully there will be no more breakage reports

ddrake1984•11/16/23, 6:32 AM

Mine wasnt a result of screws tho

ddrake1984•11/16/23, 6:32 AM

ddrake1984•11/16/23, 6:32 AM

No screws reinforce this bit

Dddrake1984 Mine wasnt a result of screws tho

walmis•11/16/23, 6:39 AM

That broken bit is the screw

ddrake1984•11/16/23, 6:42 AM

Ah, I call it a collar

a screw for me is

ddrake1984•11/16/23, 6:42 AM

Dddrake1984 Ah, I call it a collar 😅 a screw for me is

PiNKSH!T•11/16/23, 6:43 AM

something else comes to mind for me when I think of a screw

DxMarovitch•11/16/23, 10:46 AM

Hey there, I am considering getting the HPG H160 for MSFS, I was wondering if that in conjunction with your TelemFFB software, would work with a MS Sidewinder FFB2? Thanks in advance for any info

DDxMarovitch Hey there, I am considering getting the HPG H160 for MSFS, I was wondering if th...

walmis•11/16/23, 10:51 AM

Hi, in the current state it will not work with other devices other than the Rhino, but in theory it's possible to port the hardware layer of telemFFB to other hardware.

Wwalmis Hi, in the current state it will not work with other devices other than the Rhin...

DxMarovitch•11/16/23, 10:55 AM

Gotcha, thank you for the info!

Jehly•11/17/23, 1:56 AM

Not sure if anyone else has experienced this, but over the last FFB update or two I noticed it flips my rudder input and there's no way for me to re-bind or invert it from inside DCS. If I close TelemFFB, works normal.

Jehly•11/17/23, 1:56 AM

Have you experienced this, @Number481?

JJehly Not sure if anyone else has experienced this, but over the last FFB update or tw...

Number481•11/17/23, 1:57 AM

Talking fixed wing? Very high probability there are bugs in the rudder trim following feature that I haven't found yet.

Number481•11/17/23, 1:59 AM

try pedal_trimming_enabled = falsepedal_trimming_enabled = false... I had no problems with it in any of the module testing I did.. but I certainly did not test all modules and didn't actually fly around much

Jehly•11/17/23, 2:03 AM

I'm flying specifically A10CII

Jehly•11/17/23, 2:03 AM

Is that in the pedals.ini file

JJehly I'm flying specifically A10CII

Number481•11/17/23, 2:06 AM

It’s in the default config but you can add it in your userconfig

MashedPotato•11/17/23, 2:12 AM

Is there any way to add support for the new F-15E setting that gives full deflection at half forward stick (a la the real jet). Like add a soft/hard stop to the rhino when it detects you're in an F-15E and that option is checked

MMashedPotato Is there any way to add support for the new F-15E setting that gives full deflec...

Number481•11/17/23, 2:14 AM

Not to detect the setting in DCS, but you could create a configurator profile for the 15 and load it dynamically when in the f15 via TelemFFB. Would be up to you to ensure the setting is enabled in the sim.

NNumber481 It’s in the default config but you can add it in your userconfig

Jehly•11/17/23, 2:14 AM

Confirmed. This was the issue.

Jehly•11/17/23, 2:14 AM

Set to false and no inverted pedals.

JJehly Confirmed. This was the issue.

Number481•11/17/23, 2:15 AM

Hmm. I’ll take a look. The a10 was one I did test but…

NNumber481 Not to detect the setting in DCS, but you could create a configurator profile f...

MashedPotato•11/17/23, 2:17 AM

Pretend like I'm a dumb dumb, is there a guide to actually setting this up?

MMashedPotato Pretend like I'm a dumb dumb, is there a guide to actually setting this up?

Number481•11/17/23, 2:23 AM

This is the second time I’ve referenced this message. I should probably put it in the manual

📃general

NNumber481 This is the second time I’ve referenced this message. I should probably put it i...

MashedPotato•11/17/23, 2:26 AM

ty, is there a guide to setting up a stop on the axis for the profile?

Number481•11/17/23, 2:29 AM

not that I know of.. it is just a matter of configuring the endstop feature in configurator, but I don't use it so I can't really give you any tips.

NNumber481 This is the second time I’ve referenced this message. I should probably put it i...

MashedPotato•11/17/23, 4:43 AM

The profile load feature isn't working for me. I created a new profile, saved it to the configs folder, and pointed the telemffb config at it via what you posted, it doesn't update in the F-15

MMashedPotato The profile load feature isn't working for me. I created a new profile, saved it...

Number481•11/17/23, 4:48 AM

I know the feature works, so...

check the telemffb log for any clues
post the relevant section if your telemffb user config

NNumber481 I know the feature works, so... - check the telemffb log for any clues - post th...

MashedPotato•11/17/23, 4:52 AM

2023-11-16 21:52:32.906 - WARNING - Unknown parameter vpconf

MashedPotato•11/17/23, 4:53 AM

That's gotta be the issue

MashedPotato•11/17/23, 4:53 AM

[F-15ESE]
type=JetAircraft
vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf'
runway_rumble_intensity=2.0
speedbrake_buffet_intensity = 0.15
gear_buffet_intensity = 0.15

MMashedPotato [F-15ESE] type=JetAircraft vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Con...

Number481•11/17/23, 4:59 AM

its probably barfing on the backslashes... try the relative path using forward slashes './configs/F-15E.vpconf''./configs/F-15E.vpconf'

NNumber481 its probably barfing on the backslashes... try the relative path using forward s...

MashedPotato•11/17/23, 5:03 AM

2023-11-16 22:02:35.630 - WARNING - Unknown parameter vpconf
Same thing with different slashes

Number481•11/17/23, 5:06 AM

looks like there's a bug that displays that (Because there is no internal default value in TelemFFB).. but it should still load the profile

Number481•11/17/23, 5:07 AM

Your rhino will beep when it loads (unless you have the buzzer disabled in configurator?)

MashedPotato•11/17/23, 5:08 AM

No beep, no profile swap

Number481•11/17/23, 5:11 AM

Send the whole TelemFFB log. I’ve got a couple minutes before I have to log off.

MashedPotato•11/17/23, 5:13 AM

TelemFFB_ffff-2055_config.ini_config.user.ini.log5.46KB

Number481•11/17/23, 5:16 AM

damnit... (my bad).. delete this from your config (both default and user if it exists in there).. this is conflicting with the ESE...

[F-15E]
    #FC3
    type=JetAircraft

[F-15E]
    #FC3
    type=JetAircraft

Number481•11/17/23, 5:17 AM

I'll need to push an update to fix that permanently

MashedPotato•11/17/23, 5:18 AM

trying without that

NNumber481 damnit... (my bad).. delete this from your config (both default and user if i...

MashedPotato•11/17/23, 5:21 AM

still didn't work

MMashedPotato still didn't work

Number481•11/17/23, 11:55 AM

hmm.. not sure what to say... after deleting the erroneous part of the config per above, it works fine for me.

MMashedPotato still didn't work

Number481•11/17/23, 12:59 PM

look at your log again and make sure it is not still overwriting the read config from another section.. this is what your previous log said

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

The bad [F-15E] section was overwriting what you had in the [F-15ESE] section

So, I think I'm the first one here to do this. Was doing some circuits with the F-15E, on landing du

Similar Threads