Not sure if anyone else has experienced this, but over the last FFB update or two I noticed it flips

J

JehlyOP•11/17/23, 1:56 AM

Have you experienced this, @Number481?

JJehly Not sure if anyone else has experienced this, but over the last FFB update or tw...

N

Number481•11/17/23, 1:57 AM

Talking fixed wing? Very high probability there are bugs in the rudder trim following feature that I haven't found yet.

N

Number481•11/17/23, 1:59 AM

try

pedal_trimming_enabled = false

pedal_trimming_enabled = false

... I had no problems with it in any of the module testing I did.. but I certainly did not test all modules and didn't actually fly around much

J

JehlyOP•11/17/23, 2:03 AM

I'm flying specifically A10CII

J

JehlyOP•11/17/23, 2:03 AM

Is that in the pedals.ini file

JJehly I'm flying specifically A10CII

N

Number481•11/17/23, 2:06 AM

It’s in the default config but you can add it in your userconfig

M

MashedPotato•11/17/23, 2:12 AM

Is there any way to add support for the new F-15E setting that gives full deflection at half forward stick (a la the real jet). Like add a soft/hard stop to the rhino when it detects you're in an F-15E and that option is checked

MMashedPotato Is there any way to add support for the new F-15E setting that gives full deflec...

N

Number481•11/17/23, 2:14 AM

Not to detect the setting in DCS, but you could create a configurator profile for the 15 and load it dynamically when in the f15 via TelemFFB. Would be up to you to ensure the setting is enabled in the sim.

NNumber481 It’s in the default config but you can add it in your userconfig

J

JehlyOP•11/17/23, 2:14 AM

Confirmed. This was the issue.

J

JehlyOP•11/17/23, 2:14 AM

Set to false and no inverted pedals.

JJehly Confirmed. This was the issue.

N

Number481•11/17/23, 2:15 AM

Hmm. I’ll take a look. The a10 was one I did test but…

NNumber481 Not to detect the setting in DCS, but you could create a configurator profile f...

M

MashedPotato•11/17/23, 2:17 AM

Pretend like I'm a dumb dumb, is there a guide to actually setting this up?

MMashedPotato Pretend like I'm a dumb dumb, is there a guide to actually setting this up?

N

Number481•11/17/23, 2:23 AM

This is the second time I’ve referenced this message. I should probably put it in the manual

📃general

NNumber481 This is the second time I’ve referenced this message. I should probably put it i...

M

MashedPotato•11/17/23, 2:26 AM

ty, is there a guide to setting up a stop on the axis for the profile?

N

Number481•11/17/23, 2:29 AM

not that I know of.. it is just a matter of configuring the endstop feature in configurator, but I don't use it so I can't really give you any tips.

NNumber481 This is the second time I’ve referenced this message. I should probably put it i...

M

MashedPotato•11/17/23, 4:43 AM

The profile load feature isn't working for me. I created a new profile, saved it to the configs folder, and pointed the telemffb config at it via what you posted, it doesn't update in the F-15

MMashedPotato The profile load feature isn't working for me. I created a new profile, saved it...

N

Number481•11/17/23, 4:48 AM

I know the feature works, so...

check the telemffb log for any clues
post the relevant section if your telemffb user config

NNumber481 I know the feature works, so... - check the telemffb log for any clues - post th...

M

MashedPotato•11/17/23, 4:52 AM

2023-11-16 21:52:32.906 - WARNING - Unknown parameter vpconf

M

MashedPotato•11/17/23, 4:53 AM

That's gotta be the issue

M

MashedPotato•11/17/23, 4:53 AM

[F-15ESE]
type=JetAircraft
vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf'
runway_rumble_intensity=2.0
speedbrake_buffet_intensity = 0.15
gear_buffet_intensity = 0.15

MMashedPotato [F-15ESE] type=JetAircraft vpconf='C:\Users\Mike\Desktop\VPforce_FFB_Con...

N

Number481•11/17/23, 4:59 AM

its probably barfing on the backslashes... try the relative path using forward slashes

'./configs/F-15E.vpconf'

'./configs/F-15E.vpconf'

NNumber481 its probably barfing on the backslashes... try the relative path using forward s...

M

MashedPotato•11/17/23, 5:03 AM

2023-11-16 22:02:35.630 - WARNING - Unknown parameter vpconf
Same thing with different slashes

N

Number481•11/17/23, 5:06 AM

looks like there's a bug that displays that (Because there is no internal default value in TelemFFB).. but it should still load the profile

N

Number481•11/17/23, 5:07 AM

Your rhino will beep when it loads (unless you have the buzzer disabled in configurator?)

M

MashedPotato•11/17/23, 5:08 AM

No beep, no profile swap

N

Number481•11/17/23, 5:11 AM

Send the whole TelemFFB log. I’ve got a couple minutes before I have to log off.

M

MashedPotato•11/17/23, 5:13 AM

TelemFFB_ffff-2055_config.ini_config.user.ini.log5.46KB

N

Number481•11/17/23, 5:16 AM

damnit... (my bad).. delete this from your config (both default and user if it exists in there).. this is conflicting with the ESE...

[F-15E]
    #FC3
    type=JetAircraft

[F-15E]
    #FC3
    type=JetAircraft

N

Number481•11/17/23, 5:17 AM

I'll need to push an update to fix that permanently

M

MashedPotato•11/17/23, 5:18 AM

trying without that

NNumber481 damnit... (my bad).. delete this from your config (both default and user if i...

M

MashedPotato•11/17/23, 5:21 AM

still didn't work

MMashedPotato still didn't work

N

Number481•11/17/23, 11:55 AM

hmm.. not sure what to say... after deleting the erroneous part of the config per above, it works fine for me.

MMashedPotato still didn't work

N

Number481•11/17/23, 12:59 PM

look at your log again and make sure it is not still overwriting the read config from another section.. this is what your previous log said

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

2023-11-16 22:07:04.484 - INFO - Found section [F-15ESE] for aircraft 'F-15ESE' in config
2023-11-16 22:07:04.485 - INFO - Loading parameters from [DCS.JetAircraft] section
2023-11-16 22:07:04.486 - INFO - Found section [F-15E] for aircraft 'F-15ESE' in config

The bad [F-15E] section was overwriting what you had in the [F-15ESE] section

M

MashedPotato•11/17/23, 2:37 PM

I'll check the most recent log

NNumber481 look at your log again and make sure it is not still overwriting the read config...

M

MashedPotato•11/17/23, 4:05 PM

TelemFFB_ffff-2055_config.ini_config.user.ini.log187.01KB

MMashedPotato Click to see attachment

N

Number481•11/17/23, 4:56 PM

that looks normal... its finding your configurator install and its picking up on the vpconf setting... cant say why its not working....

What happens if you do this from a windows command prompt?

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

"C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\VPforce_FFB_Configurator.exe" -config "C:\Users\Mike\Desktop\VPforce_FFB_Configurator_v1.0.16-1\configs\F-15E.vpconf"

M

MashedPotato•11/17/23, 5:03 PM

The first one opened VPForce Configurator

M

MashedPotato•11/17/23, 5:03 PM

The 2nd one threw a windows "how do you want to open this"

N

Number481•11/17/23, 5:04 PM

you need to run it all as one command

M

MashedPotato•11/17/23, 5:05 PM

That does nothing, doesn't throw an error

M

MashedPotato•11/17/23, 5:05 PM

Doesn't even reopen configurator when I do them both together

N

Number481•11/17/23, 5:06 PM

its not supposed to.. thats how you programaticaly load the profiles. That is exactly what TelemFFB does.. so it looks like the problem is not with TelemFFB

N

Number481•11/17/23, 5:07 PM

try this too, and make sure it returns the right path to your configurator install..

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

reg query "HKEY_CURRENT_USER\SOFTWARE\VPforce\RhinoFFB" /s

M

MashedPotato•11/17/23, 5:07 PM

exportPath REG_SZ C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1/configs

N

Number481•11/17/23, 5:07 PM

but that shouldn't matter here since its not working straight on the command prompt either

M

MashedPotato•11/17/23, 5:07 PM

That's right'

N

Number481•11/17/23, 5:11 PM

and if you actually cd to

 C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1

C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1

 C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1

C:/Users/Mike/Desktop/VPforce_FFB_Configurator_v1.0.16-1 and then run

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf

VPforce_FFB_Configurator.exe -config .\configs\F-15E.vpconf?

N

Number481•11/17/23, 5:11 PM

and what if you import F-15E.vpfconf manually inside Configurator?

M

MashedPotato•11/17/23, 5:13 PM

Nothing for the cd, and manually importing works

M

MashedPotato•11/17/23, 5:14 PM

Is there a setting or something in configurator that needs to be checked to allow an external profile switch/import?

Not sure if anyone else has experienced this, but over the last FFB update or two I noticed it flips

Similar Threads