Does anyone in here have experience mounting a Rhino onto a 8020 pit? (Sim-Lab P1-X) So far I have

Does anyone in here have experience mounting a Rhino onto a 8020 pit? (Sim-Lab P1-X)
So far I have not found Joystick Base Mounting Hole Patterns for the Rhino. This would be useful template for various Sim-Rig users.

RRetroGamer Does anyone in here have experience mounting a Rhino onto a 8020 pit? (Sim-Lab P...

Bob Bushman•12/30/23, 5:19 PM

The technical drawings with hole pattern is in the manual.

RetroGamerOP•12/30/23, 5:55 PM

Thanks

RRetroGamer Does anyone in here have experience mounting a Rhino onto a 8020 pit? (Sim-Lab P...

TonyM•12/30/23, 6:41 PM

Are you going to mount it permanently?

Bob Bushman•12/30/23, 7:09 PM

Ok just testing this on my desk.
And I already want another one....

TTonyM Are you going to mount it permanently?

RetroGamerOP•12/30/23, 7:31 PM

Good question: the seat and the racing pedals are installed on sliders. Worked moderatly well with Warthog side mounted. Now, with Rhino middle installation, I have to figure out some quick release system, to switch between setups,

Ace Simulations•12/30/23, 7:34 PM

What is the lead time for just the Kit with motors and electrical board?

Fierce_Fire•12/30/23, 7:46 PM

Just a few shipping days, I think I had my package sent notification within the day, if not the day after

Ace Simulations•12/30/23, 7:48 PM

Thanks!

Sizifus•12/30/23, 8:43 PM

!status

SSizifus !status

VPforceBot•12/30/23, 8:43 PM

Hey @lone_oberon,
So the last Shipped RHINO is #0322 on 2023-12-29
Average waiting time from preorder to shipped is 215 days, median is 228 days, max is 407 days
318 Rhinos are shipped in total

Duchess ✈•12/30/23, 10:38 PM

Sweet! I might either have the last Rhino shipped in 2023 or the first shipped in 2024!!

audax•12/30/23, 11:28 PM

So...I am really enjoying my Rhino, but now that the Aim-120 isn't totally stupid anymore, I find myself flying the F-16C more than any other plane. I feel a bit stupid

audax•12/30/23, 11:29 PM

Is there already a PoC in a branch somewhere for force sensing?

audax•12/30/23, 11:31 PM

Full power friction and spring mode while measuring the force required to hold the stick should be all that's needed, shouldn't it?

Jon (Bounty_V)•12/31/23, 12:22 AM

it was explained before around a year ago (as in my paraphrasing may be widely inaccurate) but essentially the motors aren't designed for that kind of behavior and long term use could damage them

Fierce_Fire•12/31/23, 12:26 AM

time to diy force sensing stick

JJon (Bounty_V)it was explained before around a year ago (as in my paraphrasing may be widely i...

audax•12/31/23, 12:31 AM

Well okay, then I'll close that chapter. Thanks for the info

Jon (Bounty_V)•12/31/23, 12:32 AM

i also recall that even if it was set up in such a way to achieve a similar effect, it wouldn't feel as good nor be as capable as actual force sensing

Jon (Bounty_V)•12/31/23, 12:33 AM

it wouldn't be 'smooth' if that makes sense

Jon (Bounty_V)•12/31/23, 12:34 AM

I'm sure someone who knows more than I can correct me where needed and/or provide a better explanation

audax•12/31/23, 12:35 AM

I guess I'll just have to build a decent profile for the F-16 with very stiff springs and a lot more resistance near the axis limits so that it feels more natural to me.

audax•12/31/23, 12:35 AM

Is there a repository for TelemFFB aircraft profiles?

Jon (Bounty_V)•12/31/23, 12:36 AM

possibly in the knowledge base threads

Jon (Bounty_V)•12/31/23, 12:36 AM

'rhino profile sharing'

Jon (Bounty_V)•12/31/23, 12:38 AM

or the telemffb thread

audax•12/31/23, 12:48 AM

Ah, the thread has exactly what I was looking for!

walmis•12/31/23, 10:00 PM

Happy New Year's everyone!

(It's midnight in

)
Thank you for your passion and support and I wish a prosperous 2024 !

Duchess ✈•12/31/23, 10:25 PM

Happy New Year’s!

Pikas62•12/31/23, 10:27 PM

Happy New Year‘s!

Bob Bushman•12/31/23, 11:38 PM

Happy new year.

It seems i spent it with a first flight on my rhino

BBuzzteeBear Hey there, merry Xmas to you all🎄! Anyone here (preferably DE/EU) fancy to jump...

BuzzteeBear•1/1/24, 8:49 PM

Sold

Str][ker•1/1/24, 10:32 PM

Hi! Has anyone made a config for the F-15E Strike Eagle in DCS yet? If so, could you please share? Thanks!

Dddrake1984 Yeah, wasnt too bad

PiNKSH!T•1/2/24, 1:26 AM

hey m8 have you had some time with the HF8 yet? Just wondering how it feels?

PPiNKSH!T hey m8 have you had some time with the HF8 yet? Just wondering how it feels?

ddrake1984•1/2/24, 1:27 AM

Its good, worth it over the buttkicker, I scratched that off my shopping list

Dddrake1984 Its good, worth it over the buttkicker, I scratched that off my shopping list

PiNKSH!T•1/2/24, 1:28 AM

yeah sweet, going to bite the bullet on it, jbhifi have none in stock so going to order somewhere else with similar price

ddrake1984•1/2/24, 1:28 AM

Oh shit?! Maybe I took last one

ddrake1984•1/2/24, 1:28 AM

You cant buy online?

Dddrake1984 You cant buy online?

PiNKSH!T•1/2/24, 1:42 AM

yeah but they have no idea when in stock again, just going to order somewhere else for close to the same price

PPiNKSH!T yeah but they have no idea when in stock again, just going to order somewhere el...

ddrake1984•1/2/24, 1:44 AM

If your near canberra, your welcome to try before you buy

PPiNKSH!T hey m8 have you had some time with the HF8 yet? Just wondering how it feels?

Jehly•1/2/24, 2:27 AM

I have one as well, I really enjoy it.

Jehly•1/2/24, 2:27 AM

Also, it can massage your booty if you ask it nicely.

Jon (Bounty_V)•1/2/24, 3:24 AM

I'll have to add the HF8 to my wishlist

Aaudax So...I am really enjoying my Rhino, but now that the Aim-120 isn't totally stupi...

Will3D•1/2/24, 6:00 AM

LOL, know the feeling. I don't worry and just fly it with normal force feedback. It's centrally mounted also, so really nothing authentic about any of it!

WWill3D LOL, know the feeling. I don't worry and just fly it with normal force feedback....

audax•1/2/24, 9:11 AM

Yup, screw authentic. I need to tune the spring forces and maybe add g dependant forces to make it feel more natural.

JJon (Bounty_V)I'll have to add the HF8 to my wishlist

Str][ker•1/2/24, 12:17 PM

I tried the HF8 when it was released and I didn’t care for it. I found it to be uncomfortable to sit on but I also own the Jetpad from Andre and that one is very comfortable to sit on. The Jetpad is still obtainable but you need to reach out to them via Andre’s website (contact us type link). I wound up returning the HF8 and plan to get a second Jetpad as a spare. The HF8 was also pretty weak with the vibrations when I tried it.(like very weak) and I had everything maxed for settings etc. Maybe they improved that part since release in some way. I had hoped that it would be an equal to the Jetpad so people could have a choice in terms of what to buy but at least for me, it wasn’t very good at the time.

ddrake1984•1/2/24, 12:43 PM

I never owned the jetpad, but the hf8 is comfortable and the Rumble can be strong, I turned mine down to 20%

HPLsCat•1/2/24, 1:10 PM

The HF8 in a warbird will shake your teeth loose. I wouldn't classify it as weak.

Bob Bushman•1/2/24, 1:13 PM

From what ive gathered there has been a fair bitnof advancement on the software and or simshaker integration with hf8 since initial release.

HHPLsCat The HF8 in a warbird will shake your teeth loose. I wouldn't classify it as weak...

Bob Bushman•1/2/24, 1:55 PM

Havent tried the hf8 or sim transducers (yet) but I did have some cheap ones on a recliner for home theater setup.

Was barely a 50watt amp and around the 50% mark it could make the recliner rattle around the floor like an old nokia on a glass table.

While I was in it..
Pointless but fun.
It also broke my recliner beyond help in less than a year

VPforceBot•1/2/24, 2:42 PM

RHINO #0326 Has Shipped!