Jlike is it just that you need better noise reduction or do you sound really bad as in it might be a configuration issue?
EReally appreciate this 
Aidk just need similar to nvidia broadcast noise suppression in windows to linux?
JI used to use noisetorch and it was fine but at some point krisp got enabled in discord and I use that
Ai using krisp discord doesnt sound good in linux but it sounds amazing in windows so how can make that possible.
Jit sounds the same in both OSes for me 
Ewhens tyhe next version going to stable with the gpu and cpu wattage fix?
Hi found out randomly that krisp doesnt like it if you do screensharing and route the application audio through the mic 
Hit will make the game sound like it runs inside a fishbowl
Awhat you mean?
TThey all use Xiph Rnnoise as backend for noise suppression, it's the best open source one. From the 3 solutions I mentioned the easiest to set-up is NoiseTorch. But as Jorge pointed out you should also make sure your mic is configured correctly, you try to record your voice with Audacity while checking sound levels.
ASo, you recommend noisetorch?
TI never used any of those because I only use my computer mic in Discord and Discord comes with Krisp noise suppression integrated. I just wanted to show you have options you can try. NoiseTorch is the simplest to set-up. EasyEffects comes with a lot more effects to play with. "noise suppression for voice" is an always on solution that needs to be configured at the CLI.
BI'm not sure if this would still be recommended, but back along, I followed the advice here to improve my mic audio under linux. https://github.com/ublue-os/bazzite/issues/372
GitHub
I've managed to change it with opening alsamixer, picking a different sound cart and then maxing microphone volume. By default it was so quiet, you could barely hear it when talking to someone ...
EThought someone said my issue of no cpu power in the performance overlay and gpu power being wrong was fixed?
EIt's all working fine in chimeraos
Kthat was just an issue w/ mangohud
Kchanges to that are on both latest and testing, nothing gated there
EOh does it update automatically?
Kyea
Kwhatever was the newest package at build time
EWill an existing install update automatically or do I need to do something?
Kautomatic
Knext time you ublue-update/rpm-ostree update
Kor update from gamemode on a deck build
ESorry gamemode?
EI'm on a deck build
Ksteam gamemode
Kthe updater in steam also updates bazzite
ESorry not very knowledgeable on linux
EBooting it up now
EStill showing 0.0w for cpu
EAnd gpu Is like less than half what it is actually using
E
Kinteresting, what hardware?
E5600 and a 6650xt
KI'll poke around, it's for sure working on the deck
EI got no issue on chimeraos so must be fixable
Kwe're using a newer release of mangohud than chimera, which is needed for OLED atm
Kso it may just be in flux upstream
Kworth opening an issue over there just in case
ESame issue on holoiso although apparently you can fix that by installing some package to read the sensor info
EZenpower3
EGitHub
System specs: Solus Linux fully updated CPU Ryzen 5600x MB MSI MAG Mortar B550 Prior to version 0.6.7 the CPU power display worked for me, but only when "using" the INTEL RAPL power "...
EIs zenpower3 in bazziteos?
KIt's not, I'll have to add it
KGitHub
… Zen CPUs
Voltages and current are reported by Zen CPUs. However, the means
to do so is undocumented, changes from CPU to CPU, and the raw data
is not calibrated. Calibration information is avail...
Voltages and current are reported by Zen CPUs. However, the means
to do so is undocumented, changes from CPU to CPU, and the raw data
is not calibrated. Calibration information is avail...
Kthis is what broke it upstream
EWhy would the gpu be showing weird power too shows 50w at 90% load when gpu shows about 120w on chimera for same load
