hey m8, is runway rumble supposed to be on 750%?
hey m8, is runway rumble supposed to be on 750%?
Nhah.. runway rumble is one of those weird effects that didn't blow up if you set the value higher than 1.0 in the original configs and I think there were some aircraft that had that set as the default.
One of the new aspects of this new UI is that the settings sliders can be made so that they only offer a useful range, even though they display %0-100.
So many of the usable effect intensity values are in the 0.1-0.2 range, that the sliders are actually applying a scaling factor under the hood to 1.) only provide a usable setting range and 2.) give more granularity inside that setting range.
So there are some artifacts like that (%750) on a few of the old default values.
One of the new aspects of this new UI is that the settings sliders can be made so that they only offer a useful range, even though they display %0-100.
So many of the usable effect intensity values are in the 0.1-0.2 range, that the sliders are actually applying a scaling factor under the hood to 1.) only provide a usable setting range and 2.) give more granularity inside that setting range.
So there are some artifacts like that (%750) on a few of the old default values.
Nthe slider range for the runway rumble may need to be adjusted (in a subsequent version)
Pahh ok lol, once I touched that slider & set it to full it's at 100%, hiting the 'x' will put it back to 750%
Nyeah, the x button reverts the setting to what is in the default config
NBTW, since you migrated from source.. you can take your old user config and drop it in the exe folder. If it is named
If it has a different name, you will need to start telemFFB with the
config.user.iniIf it has a different name, you will need to start telemFFB with the
-o <userconfig filename>oh I never editied the .ini
Tvirus detected on Windows 11
VPforce-TelemFFB-wip-3017d8df (latest release)
VPforce-TelemFFB-wip-3017d8df (latest release)
MJust updated to TelemFFB 1.0, getting this error on trying to convert the user.ini, halp?
J@walmis @Number481 The latest auto update has made a mess. It did not restart after the update and the updater now enters a continuous cycle of updating from the former start shortcut. No new install location can be found. Is there a manual version of importing the previous *.VPconf files and User.ini?
Mexept in my case it does not work?
Ncommon occurence for apps bundled with pyinstaller.. Windows defender and some other AV tools will sometimes flag a given build as a virus. This is because it is written in Python and compiled with ‘pyinstaller’ which can sometimes result in certain partial file hashes that have been previously found in low tech malware that is commonly also written in Python and compiled with pyinstaller
Nmore info needed.... does it crash? does it say it did something but nothing happened? does it do nothing at all?
Nrecommend trying not launching from a shortcut. launch directly from the exe.. but if the in-pace install is already corrupted, it might be easier just to grab the latest zip distribution and start fresh https://vpforcecontrols.com/downloads/TelemFFB/?C=M;O=D
Mmh, it crashes and the .xml config has nothing in it.
Mif I say "no" to the initial config.user.ini conversion prompt it behaves normally.
MI mean, it starts, but if I try the conversion from Utility it crashes silently before doing anything
Ninteresting... send me your userconfig if you don't mind... I'd like to investigate why its failing. If the config worked with the previous TelemFFB without error, it should convert over.
Msure, DM?
Nthat works
TTelemFFB (3017d8df) shows errors for HPG160 and MSFS
But telemffb_controls_axes is enabled and cyclic axes are not bind.
How can I solve this?
But telemffb_controls_axes is enabled and cyclic axes are not bind.
How can I solve this?
Ttelemffb_controls_axes = enable in the 2 locations.
TNot working 
Nresolve the issue in the log message....
and
I'll look to see if there's an issue with the default settings because the axis control should be enabled by default for those helicopters
and
I'll look to see if there's an issue with the default settings because the axis control should be enabled by default for those helicopters
T
Axis control checked now! And button configured!Thanks!
FI've been having a play with the latest version of Telem FFB and enjoying all the work put into the new UI. I did notice when I got in the spitfire in DCS that there was no elevator droop when not moving and I couldn't find any section to adjust that value. Am I just been stupid by not seeing it or was it missed in the initial rollout?
FAlso can't find settings such as ground touch down.
Nlooks like elevator droop was, in fact, missed... but the touchdown effect should be part of 'runway rumble'
FI just tried changing runway rumble from 100% to 0% using the Gazelle and noticed no change when doing a heavy landing. Just to be sure I went to another module in between just to make sure the setting changes were loaded.
Nyou sure? whats your constant force slider set to in vpf configurator?
FConstant force slider set to 100% in vpf config
Nok... you should be able to feel something (albiet potentially small) when doing a (rough) landing.. but you are onto something as the max range in the default config is not big enough.. thats a weird setting that sometimes needs to be >1.0 to be felt and the current defaults are limiting it to 0.4 or less.. next update will allow the setting to go up to 4.0 (will still be a slider of %0-100) which will have the ability to really jolt you during a rough landing 
F'awaits the future broken wrist 
Thanks for all the awesome work!
Thanks for all the awesome work!
TI understand that motor Y usually is hotter, but mine has a difference of 10c, is that ok?
Tthere
WYeah, don't worry about the temps
3When i try to run Telem It's blocked by my malware protector because it detects Neshta.Virus.FileInfector.DDS.
3Is this safe? Should I allow this file?
SHello, anyone would be so kind to tell me the exact measurements of the screw thread of the stick and base? Are they imperial or euro?
3I get the fallowing error when launching
Telem
Telem
3I was using it succefully earlier but tried to copy one plames setting to another then this erroe.
Nwhen you say copy, you mean cloning a new aircraft through the 'create new aircraft' dialog?
3Yes, Ithink so
Ncan you drop a copy of the user config in here? located in
Then after dropping it here, try to delete file and rename the
Users\<your username>\AppData\Local\VPForce-TelemFFB\userconfig.xmlThen after dropping it here, try to delete file and rename the
userconfig.xml.backup to userconfig.xml and see if TelemFFB will start3message.txt7.47KB
3message.txt7.47KB
Nmaybe try to zip it up first.. not sure if discord is mangling the text when trying to paste the xml file or what
3message.zip1.11KB
3That didn't work
3Still won't start