@walmis @Number481 The latest auto update has made a mess. It did not restart after the update and t

@walmis @Number481 The latest auto update has made a mess. It did not restart after the update and the updater now enters a continuous cycle of updating from the former start shortcut. No new install location can be found. Is there a manual version of importing the previous *.VPconf files and User.ini?

NNumber481 BTW, since you migrated from source.. you can take your old user config and dro...

Mr. S•1/9/24, 7:45 PM

exept in my case it does not work?

TTonyM virus detected on Windows 11 VPforce-TelemFFB-wip-3017d8df (latest release)

Number481•1/9/24, 7:52 PM

common occurence for apps bundled with pyinstaller.. Windows defender and some other AV tools will sometimes flag a given build as a virus. This is because it is written in Python and compiled with ‘pyinstaller’ which can sometimes result in certain partial file hashes that have been previously found in low tech malware that is commonly also written in Python and compiled with pyinstaller

MMr. S exept in my case it does not work?

Number481•1/9/24, 7:53 PM

more info needed.... does it crash? does it say it did something but nothing happened? does it do nothing at all?

JJakeSixx33 | 744 |@walmis @Number481 The latest auto update has made a mess. It did not restart af...

Number481•1/9/24, 7:55 PM

recommend trying not launching from a shortcut. launch directly from the exe.. but if the in-pace install is already corrupted, it might be easier just to grab the latest zip distribution and start fresh https://vpforcecontrols.com/downloads/TelemFFB/?C=M;O=D

NNumber481 more info needed.... does it crash? does it say it did something but nothing h...

Mr. S•1/9/24, 8:00 PM

mh, it crashes and the .xml config has nothing in it.

Mr. S•1/9/24, 8:01 PM

if I say "no" to the initial config.user.ini conversion prompt it behaves normally.

Mr. S•1/9/24, 8:01 PM

I mean, it starts, but if I try the conversion from Utility it crashes silently before doing anything

MMr. S I mean, it starts, but if I try the conversion from Utility it crashes silently ...

Number481•1/9/24, 8:11 PM

interesting... send me your userconfig if you don't mind... I'd like to investigate why its failing. If the config worked with the previous TelemFFB without error, it should convert over.

NNumber481 interesting... send me your userconfig if you don't mind... I'd like to invest...

Mr. S•1/9/24, 8:11 PM

sure, DM?

Number481•1/9/24, 8:12 PM

that works

TonyM•1/9/24, 9:48 PM

TelemFFB (3017d8df) shows errors for HPG160 and MSFS
But telemffb_controls_axes is enabled and cyclic axes are not bind.
How can I solve this?

TonyM•1/9/24, 9:54 PM

telemffb_controls_axes = enable in the 2 locations.

TonyM•1/9/24, 9:55 PM

Not working

TTonyM Not working 😦

Number481•1/9/24, 10:03 PM

resolve the issue in the log message....

WARNING - joystick - Force trim enabled but buttons not configured

WARNING - joystick - Force trim enabled but buttons not configured

and

ERROR - joystick - Aircraft is configured as class HPGHelicopter.  For proper integration, TelemFFB must send axis position to MSFS.

ERROR - joystick - Aircraft is configured as class HPGHelicopter.  For proper integration, TelemFFB must send axis position to MSFS.

I'll look to see if there's an issue with the default settings because the axis control should be enabled by default for those helicopters

NNumber481 resolve the issue in the log message.... ```WARNING - joystick - Force trim ...

TonyM•1/9/24, 10:13 PM

Axis control checked now! And button configured!
Thanks!

Final Glide•1/10/24, 12:02 AM

I've been having a play with the latest version of Telem FFB and enjoying all the work put into the new UI. I did notice when I got in the spitfire in DCS that there was no elevator droop when not moving and I couldn't find any section to adjust that value. Am I just been stupid by not seeing it or was it missed in the initial rollout?

Final Glide•1/10/24, 12:54 AM

Also can't find settings such as ground touch down.

FFinal Glide I've been having a play with the latest version of Telem FFB and enjoying all th...

Number481•1/10/24, 1:00 AM

looks like elevator droop was, in fact, missed... but the touchdown effect should be part of 'runway rumble'

Final Glide•1/10/24, 1:08 AM

I just tried changing runway rumble from 100% to 0% using the Gazelle and noticed no change when doing a heavy landing. Just to be sure I went to another module in between just to make sure the setting changes were loaded.

FFinal Glide I just tried changing runway rumble from 100% to 0% using the Gazelle and notice...

Number481•1/10/24, 1:25 AM

you sure? whats your constant force slider set to in vpf configurator?

Final Glide•1/10/24, 1:27 AM

Constant force slider set to 100% in vpf config

Number481•1/10/24, 1:32 AM

ok... you should be able to feel something (albiet potentially small) when doing a (rough) landing.. but you are onto something as the max range in the default config is not big enough.. thats a weird setting that sometimes needs to be >1.0 to be felt and the current defaults are limiting it to 0.4 or less.. next update will allow the setting to go up to 4.0 (will still be a slider of %0-100) which will have the ability to really jolt you during a rough landing

Final Glide•1/10/24, 1:40 AM

'awaits the future broken wrist

Thanks for all the awesome work!

Tinman•1/10/24, 2:41 PM

I understand that motor Y usually is hotter, but mine has a difference of 10c, is that ok?

Tinman•1/10/24, 2:42 PM

there

walmis•1/10/24, 3:06 PM

Yeah, don't worry about the temps

356thFS_Piranha•1/10/24, 6:04 PM

When i try to run Telem It's blocked by my malware protector because it detects Neshta.Virus.FileInfector.DDS.

356thFS_Piranha•1/10/24, 6:05 PM

Is this safe? Should I allow this file?

Snooper•1/10/24, 6:17 PM

Hello, anyone would be so kind to tell me the exact measurements of the screw thread of the stick and base? Are they imperial or euro?

3356thFS_Piranha When i try to run Telem It's blocked by my malware protector because it detects ...

Number481•1/10/24, 6:33 PM

🧰support

356thFS_Piranha•1/10/24, 9:16 PM

I get the fallowing error when launching
Telem

356thFS_Piranha•1/10/24, 9:18 PM

I was using it succefully earlier but tried to copy one plames setting to another then this erroe.

3356thFS_Piranha I was using it succefully earlier but tried to copy one plames setting to anothe...

Number481•1/10/24, 9:24 PM

when you say copy, you mean cloning a new aircraft through the 'create new aircraft' dialog?

356thFS_Piranha•1/10/24, 9:24 PM

Yes, Ithink so

Number481•1/10/24, 9:29 PM

can you drop a copy of the user config in here? located in Users\<your username>\AppData\Local\VPForce-TelemFFB\userconfig.xmlUsers\<your username>\AppData\Local\VPForce-TelemFFB\userconfig.xml

Then after dropping it here, try to delete file and rename the userconfig.xml.backupuserconfig.xml.backup to userconfig.xmluserconfig.xml and see if TelemFFB will start

356thFS_Piranha•1/10/24, 9:33 PM

message.txt7.47KB

356thFS_Piranha•1/10/24, 9:35 PM

message.txt7.47KB

Number481•1/10/24, 9:37 PM

maybe try to zip it up first.. not sure if discord is mangling the text when trying to paste the xml file or what

356thFS_Piranha•1/10/24, 9:39 PM

message.zip1.11KB

356thFS_Piranha•1/10/24, 9:40 PM

That didn't work

356thFS_Piranha•1/10/24, 9:41 PM

Still won't start

Number481•1/10/24, 9:51 PM

the zip still contains a file called message.txt that has the same content as the two above posts.

If the backup is also corrupted, best to just delete the userconfig.xml and start TelemFFB. It will create a new one. If it fails again when you clone, try to zip up the actual xml file and send it

356thFS_Piranha•1/10/24, 9:53 PM

Thanks for your help!!

message.txt22.16KB

356thFS_Piranha•1/10/24, 9:53 PM

Is this what your looking for?

356thFS_Piranha•1/10/24, 9:55 PM

Great! got it started

3356thFS_Piranha Is this what your looking for?

Number481•1/10/24, 9:58 PM

yes. Is that the one that was failing ?

356thFS_Piranha•1/10/24, 9:58 PM

Yes

tomatoflames•1/11/24, 2:40 AM

Good evening!

I had a question regarding order#587. I was invoiced and paid the order, and the order status changed to "paid." Then I was invoiced again, but this time for a lower amount? The charge shows on my credit card statement.

Ttomatoflames Good evening! I had a question regarding order#587. I was invoiced and paid th...

walmis•1/11/24, 7:42 AM

You can disregard that, clerical error. Will ship it today.

Snubblaren•1/11/24, 10:31 AM

anyone who had problems with avira moving telemffb to quarantine?

@walmis @Number481 The latest auto update has made a mess. It did not restart after the update and t

Similar Threads