Got it, I'll keep in mind, Thank you again, I really appreciate!
Got it, I'll keep in mind, Thank you again, I really appreciate!
Syoure welcome, do you have a build log of your rig on xsimulator.net?
Sor are you just using the 3arcmin's for joystick things
RNo, Ive never shared anything there before. This is my first time buying such high precision gearboxes. I liked the 'All metal' idea.
NThere's an issue with the pattern match for the Ka50 in the telemffb export script. Sorry, its the only heli I dont own so I never do any testing with it. I grabbed the trial and found the issue. I will push a update to the repository later. In the meantime you can use this export script. Just replace the one that is in your TelemFFB/export folder. When you restart TelemFFB it will install it into the DCS folders.
TelemFFB.lua55.22KB
ROh, nice! I'll do it now, thank you for making all this, the sim is in a whole new level! .....the export script worked! I'm going bed for now, the joystick is good now, I'll have to start work on the rudder tomorrow! Thank you again!
FTried to search for a solution for a F-16 problem but found only comments and confirmations about the existence of the problem. F-16 has quite bad FFB feeling in y-axis compared to any other module (some damping and very weak spring forces). Apparently it is due to DCS FFB output and not a Rhino issue as such. However, has anyone found good settings to fly F-16 with the Rhino or are there any other workarounds to make it more precise?
SQuestion for someone who knows more than me. So I’ve been messing with my rhino a bit and am loving it so far! I noticed that in dcs everything works smoothly, however in msfs with telemffb at least in the a2a piper, it likes to be smooth but then it “catches” in a direction on occasion and you need to pull it back to where you had it. It’s not a huge movement, but enough to feel a bit weird. Is this just because of the lack of native ffb, something configured wrong, or just a quirk of that aircraft? I haven’t tried doing much as I’m still getting an understanding of the software, but I figured I’d ask.
NMight be the “lateral force” (uncoordinated turn) effect. You can try turning that off in the TelemFFB settings.
SThanks for the suggestion, I’ll try it out when I get a chance!
F@=RS= ddrake1984 my friend the washer worked excellent thanks for the advice.
AI am having an issue in the DCS F-14 that I'm hoping someone can help me with. When flying from the pilot's seat the Rhino works beautifully, with excellent force feedback effect.
However, if I jump into the rear seat, the stick will slowly move almost all the way to the rearmost position. I use the Rhino as the RIO hand controller, but the same happens if I leave the Rhino unassigned for the RIO.
When I then return to the pilot's cockpit, the stick is then way out of position (almost all the way back), and trimmed to that position. I have to hold the stick forward with full force until I can trim it to a usable level (maybe 20 seconds of holding trim). Is there any way to prevent jumping to the RIO cockpit changing the trim?
However, if I jump into the rear seat, the stick will slowly move almost all the way to the rearmost position. I use the Rhino as the RIO hand controller, but the same happens if I leave the Rhino unassigned for the RIO.
When I then return to the pilot's cockpit, the stick is then way out of position (almost all the way back), and trimmed to that position. I have to hold the stick forward with full force until I can trim it to a usable level (maybe 20 seconds of holding trim). Is there any way to prevent jumping to the RIO cockpit changing the trim?
WYeah, can confirm it's a bug with F-14. Once in RIO seat the trim center drifts to either extent
AIs there anything I can do to prevent it?
WProbably best to bug Heatblur about this
AAppears its an old known issue https://forum.dcs.world/topic/329127-known-issue-trim-does-weird-things-on-the-ground-if-you-jump-into-the-back-seat/
ED Forums
When on the ground, if I move to the back seat, when I move back to the front seat the trim position will be completely changed. It looks like it alternates between 2-3 degrees nose down and about 22 degrees nose up. If I go to the back seat then immediately push "F2" to go to the external view I...
MYes, already reported a few months ago. @Antares you can uncheck "Enable Trim Offset " in F-14 special options, but that will make the trim in the front cockpit a bit less realistic.
SHmm, I cant seem to find that setting in the config
N
SOh, well that must have been my problem, I was on the stable Telem and the wip has evolved to a far better place. Much better than digging through a txt file. Thanks for indirectly finding me the answer by getting me to update, lol. The problem seems to be gone in this version!
NSorry you had to experience pre-settings interface TelemFFB 
SNo kidding! Also, is the whole trim following thing that you mess with in stable just built in and working on its own in this version?
NIt works the same way, but the various physical and virtual gain settings are all slider bars. It’s all under the “axis control” setting (click the arrow when the setting is enabled to show all the sun settings)
SAh, i see. And it looks like it auto sets it to the current aircrafts settings
NYes. The settings tab will always show the current loaded aircraft. You can edit any aircraft or the sim/aircraft class defaults from the settings menu in the menu bar
SThats cool! seems fairly simple too use but with a hole lot of potential tweaking to dial things in.
WHi all,
Received my Rhino today and have installed everything (VKB MCGU, 10cm extension), however I'm having an issue where the motors are timing out constantly in DCS. The effect is that the controls lock for a second every three to five seconds - i.e. unuseable currently. I've scoured the manual and tried some trouble shooting - reset everything etc etc. I think I'm a little stuck currently...
I've attached a screen shot of the debug screen, as well as the current settings. Really not sure what's going on here but I could really use some help! :/
Received my Rhino today and have installed everything (VKB MCGU, 10cm extension), however I'm having an issue where the motors are timing out constantly in DCS. The effect is that the controls lock for a second every three to five seconds - i.e. unuseable currently. I've scoured the manual and tried some trouble shooting - reset everything etc etc. I think I'm a little stuck currently...
I've attached a screen shot of the debug screen, as well as the current settings. Really not sure what's going on here but I could really use some help! :/
WThat's strange, could be power problems, I'll DM you
YToday suddenly all grip buttons stopped working did anyone had similar issue ? Yesterday everything worked fine today I've noticed that grip buttons stopped working I've tried warthog and alpha none of them gives any input in debug shows me bunch of FF's
Rhino
Rhino
WThat's puzzling for sure. First I'd check the physical wiring. Maybe the grip side socket connector got loose?
Or maybe the solar flare that happened today got something to do with this
Or maybe the solar flare that happened today got something to do with this
YI've just checked that all looks solid and connected , I've also used reset settings to factory which changed everything to some weird settings but still have no input from grip
Chello, quick question here, getting a warning about a trojan virus in the VPforce TelemFFB WIP... i don't think it actually has it, but has anyone else experienced?
Cthanks
Cone smaller question, noticing that the Mi-8 in DCS is not holding the trimmer button, anyone experienced? Both the Mi-24 and KA-50 are working just fine. Also I have special setting FFB stick turned on.
Cmaybe this module doesnt support force feedback? would be sad for a helo
WCheck the trimmer mode in DCS module special settings, maybe that's the culprit
Cset correctly to joystick without springs and force feedback, still have the issue with that setting on.
WYou need to set to instant trimmer
WThat setting means -without- springs and -without- ffb
WI just wanted to publicly acknowledge @walmis for spending some time helping me problem solve this one. It looks like a USB port was playing up. Everything is working fine 
PDid the rubber washer solve your problem?
Fyes @Pikas62, thanks for asking.
NI updated TelemFFB to the new version. now after a restart my shortcut is gone. where is the actual installation now? the previous installed folder has only a couple of files and no exe??
Ndownloaded the latest version and getting this now...
N
TI had this yesterday. Exempt the folder your FFB is in and run the updater again.
NLooks like windows keeps deleting the eye
NExe
TYep
NHow do I exempt the folder?