Hey 👋, I signed up to cloudflare pages & connected my github repo, I'm running into the following E

Hey

, I signed up to cloudflare pages & connected my github repo, I'm running into the following ERROR:

✘ [ERROR] Could not resolve "/opt/buildhome/repo/.vercel/output/static/_worker.js/index.js"

✘ [ERROR] Could not resolve "/opt/buildhome/repo/.vercel/output/static/_worker.js/index.js"

does anyone know what it is, and why it happens?

mohamed.adham•1/29/24, 2:13 PM

Hello,

mohamed.adham•1/29/24, 2:14 PM

I need to create a KV worker can I do it in a next project,
Since next-on-pages including its worker.

mohamed.adham•1/29/24, 2:15 PM

So can I create a KV from it or should I create a separate project for the KV

MMorgan Hey 👋, I signed up to cloudflare pages & connected my github repo, I'm running ...

James•1/29/24, 8:02 PM

sounds like maybe there was an issue with the build earlier on that stopped it from generating the final worker?

Original message was deleted

James•1/29/24, 8:02 PM

Please try asking in a different channel as this is unrelated to next-on-pages. Maybe general-help

Mmohamed.adham So can I create a KV from it or should I create a separate project for the KV

James•1/29/24, 8:03 PM

you can use KV fine in your next.js project.

JJames sounds like maybe there was an issue with the build earlier on that stopped it f...

MorganOP•1/29/24, 8:14 PM

What’s a good next step? Kick off another build?

JJames you can use KV fine in your next.js project.

mohamed.adham•1/29/24, 8:15 PM

I made it in next project

mohamed.adham•1/29/24, 8:15 PM

But I have an error

mohamed.adham•1/29/24, 8:17 PM

Keep in mind,
I already added the key before

mohamed.adham•1/29/24, 8:17 PM

This is the code..

When I ran it, it responded with an undefined object

rn_image_picker_lib_temp_d30200e1-58df-47e1-a6c7-84a15e3f91cc.jpg

mohamed.adham•1/29/24, 8:19 PM

If I uncomment the put statement above,
The code runs as expected and returns the value I target,
But after removing the put statement and targeting the same key it came back to respond with an undefined object

mohamed.adham•1/29/24, 8:20 PM

Why is that,
If anyone can help

MMorgan What’s a good next step? Kick off another build?

James•1/29/24, 9:38 PM

read the full build log and see if there are any other issues

Mmohamed.adham Why is that, If anyone can help

Befus•1/30/24, 8:09 AM

Are you using a wrangler.toml file? You get undefined because it cant find the key anymore

BBefus Are you using a wrangler.toml file? You get undefined because it cant find the k...

mohamed.adham•1/30/24, 8:44 AM

In nextJs project we don't use wrangler.toml file because the configurations are in next.config.js

BBefus Are you using a wrangler.toml file? You get undefined because it cant find the k...

mohamed.adham•1/30/24, 8:54 AM

But when I get values from the terminal it works as expected.

mohamed.adham•1/30/24, 8:54 AM

I already defined the KV in next.conf.js

mohamed.adham•1/30/24, 8:55 AM

why should I have a wrangler.toml file then ?

Befus•1/30/24, 9:49 AM

Why are you putting it in the next config? In the kv documentation it uses a wrangler.toml I believe

Befus•1/30/24, 9:50 AM

It makes it so youre values are also stored locally otherwise your code would only work in production

BBefus Why are you putting it in the next config? In the kv documentation it uses a wra...

Hello, I’m Allie!•1/30/24, 9:58 AM

Note that this only applies when using

wrangler pages dev

wrangler pages dev

. If you are using

next dev

next dev

, then Bindings like KV will not be populated.

HHello, I’m Allie!Note that this only applies when using `wrangler pages dev`. If you are using `n...

Befus•1/30/24, 10:08 AM

If you use cf bindings proxy it fixes that aswell I believe, atleast thats how I do it

BBefus If you use cf bindings proxy it fixes that aswell I believe, atleast thats how I...

Hello, I’m Allie!•1/30/24, 10:10 AM

Yeah, that. Though, that doesn't require a

wrangler.toml

wrangler.toml

Hello, I’m Allie!•1/30/24, 10:10 AM

You can pass bindings via the command line

Befus•1/30/24, 10:12 AM

Ah didnt know

JJames Would something like react-error-boundary help here perhaps?

sathoro•1/30/24, 4:21 PM

strangely I cannot get the ErrorBoundary to work at all, I tried that library and Sentry's one too

James•1/30/24, 5:27 PM

Bizarre

JJames Bizarre

sathoro•1/30/24, 5:38 PM

ok turns out most errors just don't even work with error boundaries. but even when I can trigger it, the Sentry one doesn't even log the exception!

mohamed.adham•1/30/24, 6:41 PM

Hey,

mohamed.adham•1/30/24, 6:41 PM

When I deploy my KV worker it doesn't read from the storage and give me null as response

mohamed.adham•1/30/24, 6:42 PM

Is there any missed configuration ?

mohamed.adham•1/30/24, 6:43 PM

How to solve that ?

dev.Mohamed•1/30/24, 7:08 PM

Ddev.Mohamed Click to see attachment

Hello, I’m Allie!•1/30/24, 7:09 PM

This would probably be a question for workers-and-pages-discussions.

ridwanpandi•1/31/24, 3:20 AM

hello everyone, I want to ask about ftp configuration always on, where is should be I ask on? thank you!

James•1/31/24, 8:53 AM

Try the general help channel perhaps

JJames read the full build log and see if there are any other issues

MorganOP•1/31/24, 10:43 PM

I found this:

    ⚡️ The project is set up for pnpm but it is currently being run via npm this might lead to build errors, please be sure to use the same package manager your project uses when running @cloudflare/next-on-pages

    ⚡️ The project is set up for pnpm but it is currently being run via npm this might lead to build errors, please be sure to use the same package manager your project uses when running @cloudflare/next-on-pages

Is it compatible with pnpm?

JJames read the full build log and see if there are any other issues

MorganOP•1/31/24, 10:45 PM

Also, this:

22:43:28.203    ▲  Build Completed in .vercel/output [1m]
22:43:28.315    ⚡️ Completed `npx vercel build`.
22:43:30.081    ⚡️ Unexpected error: ENOENT: no such file or directory, copyfile '/opt/buildhome/repo/.vercel/output/functions/og.func/wasm/wasm_a7e702bc5ba9227243abda7977c8096f59478d3f.wasm' -> '/opt/buildhome/repo/.vercel/output/static/_worker.js/__next-on-pages-dist__/wasm/wasm_a7e702bc5ba9227243abda7977c8096f59478d3f.wasm'
22:43:30.137    Finished
22:43:30.138    Found _worker.js in output directory. Uploading.

22:43:28.203    ▲  Build Completed in .vercel/output [1m]
22:43:28.315    ⚡️ Completed `npx vercel build`.
22:43:30.081    ⚡️ Unexpected error: ENOENT: no such file or directory, copyfile '/opt/buildhome/repo/.vercel/output/functions/og.func/wasm/wasm_a7e702bc5ba9227243abda7977c8096f59478d3f.wasm' -> '/opt/buildhome/repo/.vercel/output/static/_worker.js/__next-on-pages-dist__/wasm/wasm_a7e702bc5ba9227243abda7977c8096f59478d3f.wasm'
22:43:30.137    Finished
22:43:30.138    Found _worker.js in output directory. Uploading.

James•1/31/24, 10:46 PM

That error looks like it might be the culprit

James•1/31/24, 10:46 PM

Please can you open an issue on our GitHub repo with that error

JJames Please can you open an issue on our GitHub repo with that error

MorganOP•1/31/24, 10:46 PM

Will do

James•1/31/24, 10:46 PM

A minimal reproduction would be appreciated if possible

JJames A minimal reproduction would be appreciated if possible

MorganOP•1/31/24, 10:47 PM

I'll see what I can do.

ashutosh•2/1/24, 1:57 AM

Does server actions works for anyone here? I am using Next 14.1.0 and all the server actions XHR requests are failing!

sathoro•2/1/24, 12:22 PM

I finally got error reporting with Sentry working well with next-on-pages

I started from scratch and used the Loader Script instead of their "automatic" setup

this works for some errors but not the ones caught by the built-in NextJS error boundary in production

so, I used

react-error-boundary

react-error-boundary

to wrap my app like this, and now it catches everything and allowed us to customize the error page:

<ErrorBoundary
  onError={(error, errorInfo) => {
    if (window.Sentry) {
      window.Sentry.captureException(error);
    }
  }}
  fallbackRender={({ error, resetErrorBoundary }) => (
    // add your own UI
  )}
>
  <Component {...pageProps} />
</ErrorBoundary>

<ErrorBoundary
  onError={(error, errorInfo) => {
    if (window.Sentry) {
      window.Sentry.captureException(error);
    }
  }}
  fallbackRender={({ error, resetErrorBoundary }) => (
    // add your own UI
  )}
>
  <Component {...pageProps} />
</ErrorBoundary>

James•2/1/24, 6:30 PM

Nice!

Aashutosh Does server actions works for anyone here? I am using Next 14.1.0 and all the se...

James•2/1/24, 6:31 PM

Server actions should work. Please can you open a GitHub issue with a reproduction if they're not working for you?

JJames A minimal reproduction would be appreciated if possible

MorganOP•2/2/24, 10:32 AM

On the surface it looks related to a route that generates an OG image.

MorganOP•2/2/24, 10:34 AM

I have managed to get a Next.js 14 site working after changing all routes to "edge", but I'm getting errors on dynamic routes, how do I go about surfacing them?

Usually, with Vercel, I could add a console.log() and view the server logs to debug, how do I go about doing that with Cloudflare?

I've looked at realtime logs, but they only seem to contain headers.

⚡️ The project is set up for pnpm but it is currently being run via npm this might lead to build errors, please be sure to use the same package manager your project uses when running @cloudflare/next-on-pages

22:43:28.203 ▲ Build Completed in .vercel/output [1m] 22:43:28.315 ⚡️ Completed `npx vercel build`. 22:43:30.081 ⚡️ Unexpected error: ENOENT: no such file or directory, copyfile '/opt/buildhome/repo/.vercel/output/functions/og.func/wasm/wasm_a7e702bc5ba9227243abda7977c8096f59478d3f.wasm' -> '/opt/buildhome/repo/.vercel/output/static/_worker.js/__next-on-pages-dist__/wasm/wasm_a7e702bc5ba9227243abda7977c8096f59478d3f.wasm' 22:43:30.137 Finished 22:43:30.138 Found _worker.js in output directory. Uploading.

<ErrorBoundary onError={(error, errorInfo) => { if (window.Sentry) { window.Sentry.captureException(error); } }} fallbackRender={({ error, resetErrorBoundary }) => ( // add your own UI )} > <Component {...pageProps} /> </ErrorBoundary>

Hey 👋, I signed up to cloudflare pages & connected my github repo, I'm running into the following E

Similar Threads

Similar Threads

Similar Threads