@walmis for the Limit CAD When you export the file and put it in to a slicer to print its blank. I'v

@walmis for the Limit CAD When you export the file and put it in to a slicer to print its blank. I've tried 3 different slicers. LycheeSlicer Anycubic, and Chitubox. I'm in need of FWD 12, all others no limit the highest I can get it is Left/Right 22, Aft 21.

walmis•2/4/24, 12:15 PM

Dunno, works fine in prusaSlicer/BambuStudio with .step and .stl

RRAFFT @walmis for the Limit CAD When you export the file and put it in to a slicer to ...

Fierce_Fire•2/4/24, 3:01 PM

Remember to export as the correct file type, no slicer accepts standard cad files

Wwalmis umm, it's all here:

TonyM•2/4/24, 4:43 PM

Good to know! I suppose there is an incompatibility on my browser as I can only see the first 2 rows. I will try on a different browser now.

BTW, when I export it to an STL data it appears quite small on my Prusa slicer.
How much larger in % should I print it?

walmis•2/4/24, 4:44 PM

Try drag-expanding that pane, it should reveal all settings

walmis•2/4/24, 4:44 PM

It should be 1:1 in millimeters

Wwalmis Try drag-expanding that pane, it should reveal all settings

TonyM•2/4/24, 6:03 PM

It works now! Thanks!

RAFFTOP•2/4/24, 11:50 PM

Hey guy I just put the Winwing F18 stick on the VPforce with the winwing adapter all the buttons and axis work except the trim switch. Has anyone had this issue and know how to fix it. The simapp pro dose not see the stick so I cant program it in there

Mountain Dew•2/5/24, 6:56 AM

hey guys, i have 2 yoke system made from the motors for VPforce. I wanted to know if the software has any function to link the 2 yokes together. or if there is any other ways to lik the 2 yokes so that they roll and pitch together. Thank you

MMountain Dew hey guys, i have 2 yoke system made from the motors for VPforce. I wanted to kno...

Drei•2/5/24, 7:14 AM

Did you try just simply bind both of them to the axis? In theory they get the same input from TelemFFB they might mirror stick position as well... never tried, just thinking out loud

Mountain Dew•2/5/24, 7:21 AM

I have 2 separate yokes (2 motors per yoke) which are not mechanically connected, and I would prefer to connect both sides electronically. And i do not have space for a mechenical connection

MMountain Dew I have 2 separate yokes (2 motors per yoke) which are not mechanically connected...

Drei•2/5/24, 9:17 AM

Sorry, maybe i was not clear. What i am saying is try to bind both yokes in game to the same axis, if there is a 2 way com between the yoke and the pc (which should be imo) maybe the FFB will automaticaly updates the position of the yoke you are not moving based on your input. Again, not a professional just thinking out loud

Mountain Dew•2/5/24, 1:41 PM

Alright. Thanks very much for the help

MMountain Dew hey guys, i have 2 yoke system made from the motors for VPforce. I wanted to kno...

Number481•2/5/24, 2:00 PM

this concept does not exist in any of the software

PiNKSH!T•2/5/24, 5:12 PM

Two questions; Are these shift registers compatible with the Rhino base? BM4021 shift registers. Output 5 pin & What is the max peak torque you get out of the 86BLF04 motors? Thanks

aemvee•2/6/24, 8:16 PM

What's the first thing to do here?
edit: Apparently report the issue. I got it working right after

aemvee•2/6/24, 8:21 PM

"Have you tried turning it off and on again" seemed to be the trick

aemvee•2/6/24, 8:55 PM

I think the cause was not inverting Y axis in DCS for F-5E

Truuul•2/6/24, 9:31 PM

What revision is the VKB adapter B or C?

Brizzly•2/7/24, 1:13 PM

I am trying to setup my new Rhino with my Realsimulator F-16 grip. Right now, I've tried both generic grip, and generic grip (Realsimulator 64-button), but no button presses register on the Rhino side. The grip BLE funtion works fine, but no buttons on the Rhino itself. I tried plugging up a regular TM Warthog grip set to generic, and the buttons register fine. Anything I'm missing to get the RS grip to work correctly?

TTruuul What revision is the VKB adapter B or C?

Drei•2/7/24, 3:56 PM

Mine was B, (received my unit couple weeks ago).

necasjanz•2/7/24, 4:04 PM

necasjanz•2/7/24, 4:06 PM

I’ve seen this amazing joystick also own the Microsoft fc2 for many years and I would love to own a VPforce rhino

R7-Cedar•2/7/24, 4:14 PM

Anybody happened to have got both VP-Joystick and VP-Pedal FFB working on Condor2? I'm getting control input for both Joystick and Pedal working, however, only one can get the FFB effect. 90% at time the joystick gets FFB, sometimes the Pedal gets FFB. The issue well might be on Condor side, I'm just wondering if anyone have got both working simultaneously.

RR7-Cedar Anybody happened to have got both VP-Joystick and VP-Pedal FFB working on Condor...

Number481•2/7/24, 10:58 PM

If I had to guess, the sim most likely has no concept of FFB on the rudder axis. FFB pedals are extremely rare and there has never anything remotely resembling “affordable” pedals (talking in terms of ms sidewinder land). It’s unlikely the devs would develop support without gear to test against.

NNumber481 If I had to guess, the sim most likely has no concept of FFB on the rudder axis....

R7-Cedar•2/8/24, 3:10 AM

I guess the same, or the Condor2 may not be anticipating two FFB devices to work with at same time. I wish the FFB pedal was not this rare. It's been some 25 years since the last time I played the MS Combat Flight Simulator with the Sidewinder FFB (1st model). I'm so happy I've got the VPforce FFB setup. Somebody has mentioned about this awesome FFB solution in the Condor2 forum so I'm hoping their devs will look into this rare but existing(and growing I'd like to assume)demand someday.

Lei•2/8/24, 1:01 PM

Finally got the Winwing adapter but it’s shaking and cannot be secured. How can I fix that? I saw a post suggesting rubber washer earlier but not sure if it’s same problem

Vulcan•2/8/24, 1:26 PM

Have you tried mounting the winwing grip directly to the adapter to see if the issue is just when using the winwing extension?

LLei Finally got the Winwing adapter but it’s shaking and cannot be secured. How can ...

walmis•2/8/24, 1:32 PM

Looks to me like it's not threaded fully

Bob Bushman•2/8/24, 1:33 PM

Yeah, that was beyond loose.

Lei•2/8/24, 1:36 PM

You are right . After a few try it tightened properly.

Fer•2/8/24, 2:52 PM

You need to put a washer on it

Fer•2/8/24, 2:53 PM

I had the same issue and solved with that

FFer You need to put a washer on it

Lei•2/8/24, 5:10 PM

I saw your video first but then after several tries it works pretty okay now without washer. Now just need to find a mounting solution. It’s very tall with the adapter and extension so I might as well somehow fixed it on the floor

LLei I saw your video first but then after several tries it works pretty okay now wit...

Tinman•2/8/24, 5:56 PM

Does the Winwing grip need the software or does a generic profile work for it?

Lei•2/8/24, 5:57 PM

In the VP configuration tool you can select Winwing adapter for the grip. Not sure what it does because generic grip seems to have worked anyway. But bottom line is, it works just fine with Rhino

BBrizzly I am trying to setup my new Rhino with my Realsimulator F-16 grip. Right now, I...

Bozo VFA-86•2/8/24, 5:58 PM

Any luck? I will be trying the same in a few months.

BBozo VFA-86 Any luck? I will be trying the same in a few months.

Brizzly•2/8/24, 9:45 PM

No luck yet. Useable since I’ve been assigning buttons via the BLE portion of the grip, but still nothing registering on the Rhino itself with that particular grip

walmis•2/9/24, 5:28 AM

I know a few RS users that successfully use their grips, so this instance is kinda strange. Since the grip receives power and BLE works fine, I assume the connection is good with the grip.

LLei I saw your video first but then after several tries it works pretty okay now wit...

ddrake1984•2/9/24, 8:05 AM

Needs washer, you don’t want to over tighten

LLei I saw your video first but then after several tries it works pretty okay now wit...

PiNKSH!T•2/9/24, 8:48 AM

A plywood sheet 10-15mm (depth) that's big enough for your seat to sit on with the Rhino mounted in front, you can even have it big enough to go under your desk & have rudder pedals sit on top too. Just measure where the Rhino will go drill the 4 holes & put some small bolts in from what will be the bottom & then once in place you can bolt the Rhino in place on the "floor" right in front of your chair.

PPiNKSH!T A plywood sheet 10-15mm (depth) that's big enough for your seat to sit on with t...

Lei•2/9/24, 9:53 AM

Thanks for the suggestion, I just finished a quick and dirty version (Just drilled 4 screws into a piece of plywood and placed in front of the seat) works perfectly fine.

LLei Thanks for the suggestion, I just finished a quick and dirty version (Just d...

PiNKSH!T•2/9/24, 9:56 AM

nice works well

Rob EB•2/9/24, 2:27 PM

@walmis
FFB Configurator
Spring Gain Map Graph Appears to be Reversed
When adjusting the spring map, the graph adjusts the gain in the opposite sense to the axis movement displayed. In the attached image the position of each axis as indicated should result in the mapped spring gain. However, the gain is as mapped for the opposite direction. In this example, the gain is zero for the indicated postions but follows the map when moved in the opposite direction.

My Rhino Y-axis is inverted (e-stop facing forward). X-axis is not inverted but the direction of movement displays in the map graph and in the display on the settings tab as expected.

RRAFFT Hey guy I just put the Winwing F18 stick on the VPforce with the winwing adapter...

Isimus•2/9/24, 2:43 PM

Same ting to me. I have just mounted a Winwing F18 stick with the winwing adapter and is not recognizing the trim switches. Have you managed to make it work? Anybody else has the same issue?