So you’re saying the stick is not giving enough force or too much? I’m just curious.
So you’re saying the stick is not giving enough force or too much? I’m just curious.
RWhat's current lead time for 57BLF03 motors?
FMotor kit is like a few days, think I had confirmation of sending like a day after purchase
RAnd as long as I follow a guide like this I should be fine, right? https://github.com/Gadroc/vpforce-ffb-joystick?tab=readme-ov-file
GitHub
FFB Joystick designed around VPForceControl kits. Contribute to Gadroc/vpforce-ffb-joystick development by creating an account on GitHub.
FFairly likely, I haven't checked/used those but I believe they're pretty complete
FAnd there is always this discord for any questions
FIf you get stuck, he's here somewheres you can always ping him.
MI just completed a DIY build from Protomakers guide and plans, which I found to be excellent, and it looks like the site you posted from Gadroc has a few changes to the gimbal components and the addition of screw inserts, but is very similar, and he recommends following Protomakers guide: https://github.com/protomaker964/Rhino-FFB-Clone-3D_Printed?search=1
GitHub
3D print files, parts list and instructions to build a DIY version of the Rhino FFB Stick base using the VPForce motor kit - protomaker964/Rhino-FFB-Clone-3D_Printed
TI swapped my base so instead of the red button being toward me, it is now to the side, effectively bringing the joystick base closer to the seat (my bum). I then swapped X and Y in DCS, but now the force trim does the opposite of what I want. It places the trimmer where the stick is, but on release does the reverse of what I want. Is there a fix for this or should I just go back to where I started with the big red button facing backward toward the chair?
TI guess I am asking is there a way to swap x and y in the vp rhino software?
Sswap axes and invert as needed in configurator. leave the game as it was
AHey, I put a google forms thing in a few days ago and haven't gotten any kind of confirmation. Should I have?
WNo. You can DM the !info <email > command to the VPForce bot to see your place in line.
THello!
Anyone here mountd the Rhino on a 3dof H3 or P3?
Anyone here mountd the Rhino on a 3dof H3 or P3?
V:package: 
RHINO #0405 Has Shipped!
RHINO #0405 Has Shipped!V:package: 
RHINO #0404 Has Shipped!
RHINO #0404 Has Shipped!V:package: 
RHINO #0406 Has Shipped!
RHINO #0406 Has Shipped!V:package: 
RHINO #0407 Has Shipped!
RHINO #0407 Has Shipped!
CI created a G-force seat belt to simulate the sense of oppression. By grabbing the G-force data of DCS
Vhuge...do you have some video in action?
Vhow it works?
TMy wife would divorce me…. 
一https://www.bilibili.com/video/BV12N411V7cv/ website is in Chinese only tho
RGot a Jetseat too
Rman
Rfinite commodity ever since 2022
CYes
TI want as much force as I can possibly get out of it, since no PC stick generates as much force as many real aircraft. Since the limiter setting felt to me like significantly more force than I get when settings are maxed I was wondering if there's a way to get more force out of it while using the stick normally. I don't expect there is, I just thought it was worth asking.
原I'm also curious about it too. So if every slider is 100%, would the motors produce their stated peak torque at the end of the travel?
WBasically at 100% spring the force is scaled linearly through the travel range (green line), you can also have a stiffer response, but saturated at travel edges (black line). The endstops have a very rapid rise of torque response vs travel giving the illusion of more force.
It's possible to increase spring gain above 100% using the spring "Gain Map" tool
It's possible to increase spring gain above 100% using the spring "Gain Map" tool
V:package: RHINO #0408 Has Shipped!
RHINO #0408 Has Shipped!V:package: 
RHINO #0409 Has Shipped!
RHINO #0409 Has Shipped!
Bthat might be my one, exciting times ahead it should arrive today 
原So in order to achieve the peak torque output (ex. 9NM for rhino/57BLF03) at the end of the travel, is it necessary to go beyond 100% spring gain? Will it cause any damage to the motor etc?
BThey'll cut out into protection mode long before they get any damage
WNo, motors do achieve peak torque at peak travel. And no, motors are pretty robust, the only limiting factor is the temperature.
原ok, thx for the answers!
LHi everyone,
i have a question for @walmis and the TelemFFB Devs (looking at @Number481
) What would you recommendation for a yoke be? Is there a good Project with the VPForce Kit? Or is there a way to use Brunner Yokes with TelemFFB?
thanks!
i have a question for @walmis and the TelemFFB Devs (looking at @Number481
) What would you recommendation for a yoke be? Is there a good Project with the VPForce Kit? Or is there a way to use Brunner Yokes with TelemFFB?thanks!
NLast question first, no, the Bruner won’t work with TelemFFB. The driver is very custom to VPForce.
If you search around, a few people have attempted yokes. I am not qualified to give mechanical design advise, but if I were going to try, I’d rip apart my Alpha yoke that has been collecting dust under my desk for 2 years and see what I could make out of the guts.
If you search around, a few people have attempted yokes. I am not qualified to give mechanical design advise, but if I were going to try, I’d rip apart my Alpha yoke that has been collecting dust under my desk for 2 years and see what I could make out of the guts.
V:package: RHINO #0410 Has Shipped!
RHINO #0410 Has Shipped!V:package: RHINO #0411 Has Shipped!
RHINO #0411 Has Shipped!V:package: RHINO #0413 Has Shipped!
RHINO #0413 Has Shipped!V:package: RHINO #0412 Has Shipped!
RHINO #0412 Has Shipped!
TAnybody know if/when the VKB adapter will be updated to match the new VKB RevC connector that is now the standard? That’s what is on the current Gunfighter Mk4 sticks and the Gunfighter Mk3 base.
Xlast time i checked order page, it had RevC, might be wrong tho, check it out
X
Aisn't that the old standard
Aat least I thought the new one would be completely different
VThat picture is Rev B, not C. C is new one with TRRS type connector, they've gone away from pogo pins and pads.
