So in order to achieve the peak torque output (ex. 9NM for rhino/57BLF03) at the end of the travel,

So in order to achieve the peak torque output (ex. 9NM for rhino/57BLF03) at the end of the travel, is it necessary to go beyond 100% spring gain? Will it cause any damage to the motor etc?

Bob Bushman•2/20/24, 12:53 PM

They'll cut out into protection mode long before they get any damage

原原子力Hoshino So in order to achieve the peak torque output (ex. 9NM for rhino/57BLF03) at the...

walmis•2/20/24, 12:59 PM

No, motors do achieve peak torque at peak travel. And no, motors are pretty robust, the only limiting factor is the temperature.

原

原子力HoshinoOP•2/20/24, 1:01 PM

ok, thx for the answers!

leninjahd•2/20/24, 10:09 PM

Hi everyone,

i have a question for @walmis and the TelemFFB Devs (looking at @Number481

) What would you recommendation for a yoke be? Is there a good Project with the VPForce Kit? Or is there a way to use Brunner Yokes with TelemFFB?

thanks!

Lleninjahd Hi everyone, i have a question for @walmis and the TelemFFB Devs (looking at @N...

Number481•2/20/24, 11:16 PM

Last question first, no, the Bruner won’t work with TelemFFB. The driver is very custom to VPForce.

If you search around, a few people have attempted yokes. I am not qualified to give mechanical design advise, but if I were going to try, I’d rip apart my Alpha yoke that has been collecting dust under my desk for 2 years and see what I could make out of the guts.

VPforceBot•2/21/24, 10:10 AM

:package:

RHINO #0410 Has Shipped!

VPforceBot•2/21/24, 10:20 AM

:package:

RHINO #0411 Has Shipped!

VPforceBot•2/22/24, 9:51 AM

:package:

RHINO #0413 Has Shipped!

VPforceBot•2/22/24, 2:23 PM

:package:

RHINO #0412 Has Shipped!

tanr•2/22/24, 7:05 PM

Anybody know if/when the VKB adapter will be updated to match the new VKB RevC connector that is now the standard? That’s what is on the current Gunfighter Mk4 sticks and the Gunfighter Mk3 base.

Xaero Zero•2/22/24, 8:36 PM

last time i checked order page, it had RevC, might be wrong tho, check it out

Xaero Zero•2/22/24, 8:37 PM

AndyHill•2/22/24, 9:22 PM

isn't that the old standard

AndyHill•2/22/24, 9:22 PM

at least I thought the new one would be completely different

Vakarian•2/22/24, 9:25 PM

That picture is Rev B, not C. C is new one with TRRS type connector, they've gone away from pogo pins and pads.

Xaero Zero•2/23/24, 4:28 AM

oh sorry, then i'm wrong, i thought this was latest

VPforceBot•2/23/24, 9:31 AM

:package:

RHINO #0414 Has Shipped!

VPforceBot•2/23/24, 10:17 AM

:package:

RHINO #0415 Has Shipped!

MashedPotato•2/23/24, 2:51 PM

Still targeting early next month for the next mfg mod announcement, Walmis? Or did the supply issues not get relieved?

Icebeat•2/23/24, 3:26 PM

any of you knows the dimensions of the VPforce Shift-Register Board?

IIcebeat any of you knows the dimensions of the VPforce Shift-Register Board?

smitty•2/23/24, 3:28 PM

20x45mm

Glaive(Rikk)•2/24/24, 3:47 PM

In DCS how do the settings in the configurator interact with what DCS is giving?
Does making changes in the configurator settings and effects change anything in DCS at all?

GGlaive(Rikk)In DCS how do the settings in the configurator interact with what DCS is giving?...

Number481•2/24/24, 4:03 PM

Configurator sets the max capability for a given effect type. A sim can send the FFB command for “%50 spring”. That will be %50 of whatever your configurator spring settings are.

NNumber481 Configurator sets the max capability for a given effect type. A sim can send th...

Glaive(Rikk)•2/24/24, 4:09 PM

Does that work the same for all the settings and effects?

Number481•2/24/24, 4:17 PM

Yes. Some modules also vary the amount of dampening on the controls. The resulting force you feel will be affected by the damper settings in Configurator.

Same goes for all the stuff in TelemFFB. Most of those effects are "periodic" type. So while you can adjust each effect individually in TelemFFB, they are all really "% of configurator value"

Glaive(Rikk)•2/24/24, 5:00 PM

That may explain the issue I'm finding with the apache, I have an offset grip so have -5.5% static force and that allows the stick to centre perfectyl for every module........ except the apache which seems to want -2.5%
Is there anyway to change profiles/settings based on module?

GGlaive(Rikk)That may explain the issue I'm finding with the apache, I have an offset grip so...

Number481•2/24/24, 5:05 PM

You can dynamically load configurator profiles per aircraft with TelemFFB

NNumber481 You can dynamically load configurator profiles per aircraft with TelemFFB

Glaive(Rikk)•2/24/24, 5:08 PM

Ah cool, found it. Didn't relate the two I had assumed that was a settings file for TelemFFB itself...
Thanks

superbird1011•2/25/24, 10:37 PM

I know I’ve asked a few times but I’ve finally finished my move. Does anyone have any budget friendly Rhino compatible rig recommendations? I love the 80/20 style. Happy to build my own if there are plans too.

Ssuperbird1011 I know I’ve asked a few times but I’ve finally finished my move. Does anyone hav...

HPLsCat•2/25/24, 10:44 PM

Mine is side mounted with Monstertech mounts. Whether you consider that budget friendly though

HHPLsCat Mine is side mounted with Monstertech mounts. Whether you consider that budget f...

superbird1011•2/25/24, 10:45 PM

I tried desk mounting but my desk isn’t that strong and it limited me. I do want a full rig style one. I like the racing sim ones just without the angled racing chair and with actual mounting options

HPLsCat•2/25/24, 10:45 PM

Yeah, desk mount won't cut it, mine's still chair mounted and that works well

HHPLsCat Yeah, desk mount won't cut it, mine's still chair mounted and that works well

superbird1011•2/25/24, 10:49 PM

Oh I see!

superbird1011•2/25/24, 10:49 PM

I’ll consider it but I rarely fly anything with side mounting

superbird1011•2/25/24, 10:50 PM

The main thing I fly is going to be the Phantom

HPLsCat•2/25/24, 10:50 PM

You get used to it, even on planes that should be center

superbird1011•2/25/24, 10:50 PM

And then the Eurofighter when thats out

Ssuperbird1011 I know I’ve asked a few times but I’ve finally finished my move. Does anyone hav...

FlatSpin•2/25/24, 10:53 PM

track racer, sim labs, race anywhere

FFlatSpin track racer, sim labs, race anywhere

superbird1011•2/25/24, 11:16 PM

I think I had a GT1 Evo back in my simracing days. Tempted to get another one and work out how to make it for flight sims

FlatSpin•2/25/24, 11:28 PM

The price isn't bad minus the seat

Ssuperbird1011 I think I had a GT1 Evo back in my simracing days. Tempted to get another one an...

FlatSpin•2/25/24, 11:28 PM

I added monstertech mounts to my p1-x

superbird1011•2/25/24, 11:29 PM

Oh thats not a bad shout. Just need to figure out a good seat with the cut out

FlatSpin•2/25/24, 11:30 PM

@adam1220. you in the states or elsewhere. If so, the work is already done with a simfab seat.

superbird1011•2/25/24, 11:30 PM

germany!

FlatSpin•2/25/24, 11:30 PM

@adam1220. ahh, could always just modify a car seat. Or, it just popped in my head, I believe the NLR seats are available individually now. https://nextlevelracing.com/products/flight-simulator-seat/

Next Level Racing

Flight Simulator Seat Only

superbird1011•2/25/24, 11:36 PM

Ill give that a look?

VPforceBot•2/26/24, 9:45 AM

:package:

RHINO #0416 Has Shipped!

VPforceBot•2/26/24, 9:46 AM

:package:

RHINO #0417 Has Shipped!

Schneeflocke•2/26/24, 11:08 AM

Hi! I'm new and read good reviews about the ffb system

How long is the waiting list right now?
If I choose to assemble a kit myself, how long do I have to wait for the kit to arrive (Germany)? and how complicated is it to assemble?

Fr4Ged•2/26/24, 11:32 AM

!status

So in order to achieve the peak torque output (ex. 9NM for rhino/57BLF03) at the end of the travel,

Similar Threads

Similar Threads

Similar Threads