VPforce Controls•2y ago

You can dynamically load configurator profiles per aircraft with TelemFFB

NNumber481 You can dynamically load configurator profiles per aircraft with TelemFFB

Glaive(Rikk)•2/24/24, 5:08 PM

Ah cool, found it. Didn't relate the two I had assumed that was a settings file for TelemFFB itself...
Thanks

superbird1011•2/25/24, 10:37 PM

I know I’ve asked a few times but I’ve finally finished my move. Does anyone have any budget friendly Rhino compatible rig recommendations? I love the 80/20 style. Happy to build my own if there are plans too.

Ssuperbird1011 I know I’ve asked a few times but I’ve finally finished my move. Does anyone hav...

HPLsCat•2/25/24, 10:44 PM

Mine is side mounted with Monstertech mounts. Whether you consider that budget friendly though

HHPLsCat Mine is side mounted with Monstertech mounts. Whether you consider that budget f...

superbird1011•2/25/24, 10:45 PM

I tried desk mounting but my desk isn’t that strong and it limited me. I do want a full rig style one. I like the racing sim ones just without the angled racing chair and with actual mounting options

HPLsCat•2/25/24, 10:45 PM

Yeah, desk mount won't cut it, mine's still chair mounted and that works well

HHPLsCat Yeah, desk mount won't cut it, mine's still chair mounted and that works well

superbird1011•2/25/24, 10:49 PM

Oh I see!

superbird1011•2/25/24, 10:49 PM

I’ll consider it but I rarely fly anything with side mounting

superbird1011•2/25/24, 10:50 PM

The main thing I fly is going to be the Phantom

HPLsCat•2/25/24, 10:50 PM

You get used to it, even on planes that should be center

superbird1011•2/25/24, 10:50 PM

And then the Eurofighter when thats out

Ssuperbird1011 I know I’ve asked a few times but I’ve finally finished my move. Does anyone hav...

FlatSpin•2/25/24, 10:53 PM

track racer, sim labs, race anywhere

FFlatSpin track racer, sim labs, race anywhere

superbird1011•2/25/24, 11:16 PM

I think I had a GT1 Evo back in my simracing days. Tempted to get another one and work out how to make it for flight sims

FlatSpin•2/25/24, 11:28 PM

The price isn't bad minus the seat

Ssuperbird1011 I think I had a GT1 Evo back in my simracing days. Tempted to get another one an...

FlatSpin•2/25/24, 11:28 PM

I added monstertech mounts to my p1-x

superbird1011•2/25/24, 11:29 PM

Oh thats not a bad shout. Just need to figure out a good seat with the cut out

FlatSpin•2/25/24, 11:30 PM

@adam1220. you in the states or elsewhere. If so, the work is already done with a simfab seat.

superbird1011•2/25/24, 11:30 PM

germany!

FlatSpin•2/25/24, 11:30 PM

@adam1220. ahh, could always just modify a car seat. Or, it just popped in my head, I believe the NLR seats are available individually now. https://nextlevelracing.com/products/flight-simulator-seat/

Next Level Racing

Flight Simulator Seat Only

superbird1011•2/25/24, 11:36 PM

Ill give that a look?

VPforceBot•2/26/24, 9:45 AM

:package:

RHINO #0416 Has Shipped!

VPforceBot•2/26/24, 9:46 AM

:package:

RHINO #0417 Has Shipped!

Schneeflocke•2/26/24, 11:08 AM

Hi! I'm new and read good reviews about the ffb system

How long is the waiting list right now?
If I choose to assemble a kit myself, how long do I have to wait for the kit to arrive (Germany)? and how complicated is it to assemble?

Fr4Ged•2/26/24, 11:32 AM

!status

FFr4Ged !status

VPforceBot•2/26/24, 11:32 AM

Hey @Fr4Ged,
So the last Shipped RHINO is #0417 on 2024-02-26
Average waiting time from preorder to shipped is 213 days, median is 223 days, max is 433 days
411 Rhinos are shipped in total

SSchneeflocke Hi! I'm new and read good reviews about the ffb system 🙂 How long is the waiti...

Stryker990•2/26/24, 2:33 PM

Afaik the kits are less just assemble them and more u get the motors and the controlboard and the rest u gotta make yourself if u arent a builder just preorder a rhino now and if u dont want it in the end u can always cancel

Fierce_Fire•2/26/24, 2:37 PM

yes, the kits are basically: here are the motors and control board, figure out the power supply, grip interface and gimbal yourself

Fierce_Fire•2/26/24, 2:38 PM

there are some build kits others have made for the diy kits though, often for the 57 motor variant

R7-Cedar•2/26/24, 3:51 PM

Anyone noticed flap setting (Half/Full) offsets rudder spring center to the left for DCS F-18? I'm thinking it's a bug on the DCS, just wonder if anyone else see the same. It could be just me but the FFB value for the rudder from the DCS F-18 feels like it's based only on one side of rudder surface, while it should be the average of both left and right. If it was normal spring rudder pedal it probably wouldn't matter but FFB seems taking hit on this.

Shinjo B•2/26/24, 3:51 PM

Anyone know the turnaround time on the motor/pcb kits?

RR7-Cedar Anyone noticed flap setting (Half/Full) offsets rudder spring center to the left...

Number481OP•2/26/24, 4:26 PM

telemffb does look only at right rudder since the trim following code is written in a generic way and the right rudder is the only value with data when an aircraft only has one vertical stabilizer. If it averaged both, then for those single rudder aircraft it would only ever be %50 of the actual value.

In order to resolve this on the hornet, it will require special code just for that module to account for the fact that the rudders toe-in with flaps

SShinjo B Anyone know the turnaround time on the motor/pcb kits?

MashedPotato•2/26/24, 4:47 PM

Couple of days usually. The bigger motors were having supply issues though

NNumber481 telemffb does look only at right rudder since the trim following code is written...

R7-Cedar•2/26/24, 4:51 PM

Ah, that totally explains! The special code would be super, I'll just compensate it like flying warbirds for now. Thank you again, I appreciate a lot!

SR-F_Winger_[73]_David•2/26/24, 5:44 PM

hey guys. i remember to have seen a 3D printzed pulley cover somewhere.
Anyone maybe able to point me in the right direction.

SSR-F_Winger_[73]_David hey guys. i remember to have seen a 3D printzed pulley cover somewhere. Anyone m...

mechsicko•2/26/24, 5:51 PM

https://discord.com/channels/965234441511383080/1169287017268531225/1169287214656663622

RR7-Cedar Anyone noticed flap setting (Half/Full) offsets rudder spring center to the left...

TrigaNZ•2/26/24, 6:49 PM

I had this, but I fixed it, sorry I can’t recall how, but it was easy.

Galaxy•2/26/24, 10:07 PM

How are the joysticks connected to the rhino? are they custom built or are it is compatible with ones built by thrustmaster for example

Bob Bushman•2/26/24, 10:09 PM

You mean the grips ?
If so yeah, same connector as the thrustmasters or virpil grips.

AndyHill•2/26/24, 10:34 PM

adapters available for vkb (not the latest gen yet?) and winwing

MGBDave•2/26/24, 11:22 PM

I just bought the COWS DA-42 for MSFS, but not having any luck at all trying to get the ailerons/elevator axis to be controlled by TelemFFB. It jumps between actual stick position and centered many times per second, as if there is a conflicting input - but I have nothing else assigned to those axis. It works fine in every other plane. Very odd. I don't think they are using a custom simconnect variable, but how could I find out?

MMGBDave I just bought the COWS DA-42 for MSFS, but not having any luck at all trying to ...

Number481OP•2/26/24, 11:34 PM

I dont have the aircraft but I see this on their discord. The probably has the info you need.

Number481OP•2/26/24, 11:37 PM

look at the document as specified for setting up SPAD/FSUIPC.. will have the same L:var info you need for TelemFFB

NNumber481 I dont have the aircraft but I see this on their discord. The probably has the ...

MGBDave•2/26/24, 11:49 PM

Wow! Thanks for the amazingly fast response. I will check out that info and post an update back here.

Cowboy10uk•2/27/24, 1:02 AM

Hi guys, I’m currently on the waiting list and with the current numbers it’s looking like I may get invoiced around June / July. Sadly my car has just cost me all my savings, after it broke down. Does anyone know if there is a way I can request my order get delayed until later on In the year, ( October / November ish ) to allow me to save up again?