Having an issue in DCS, I start Telem, fly DCS, and someitmes if I change the plane, I do not get e

Having an issue in DCS, I start Telem, fly DCS, and someitmes if I change the plane, I do not get effects, to make it work I need to quite Telem and start it again

II/JG7_Moto Having an issue in DCS, I start Telem, fly DCS, and someitmes if I change the p...

mac22443506•3/31/24, 4:48 PM

Yes was aware of that one - during all my troubleshooting would restart telem regularly (but usually not DCS)- but it seems from the above telem (and resetting the FFB )might not be related to my issue - in any case will give it a try with and without telem and see what happens….

Wwalmis You know you can add line breaks using Shift+Enter right? 😅

mac22443506•3/31/24, 4:49 PM

No I didn’t - but do now

II/JG7_Moto Having an issue in DCS, I start Telem, fly DCS, and someitmes if I change the p...

walmis•3/31/24, 4:54 PM

Better post telem related issues to the telemFFB thread: https://discord.com/channels/965234441511383080/1093558100713279508

Virus•4/1/24, 8:43 AM

Hi, Walmis, my Winwing adapter stopped working.
Basically, I am switching between it and a Virpil grip. This time it didn't work. Now if I use the debug "grip" I get all FF FF ........ I tried to remove and remount multiple times. Also, before you ask, there are no bent pins nor in the grip nor in the adapter. With the Virpil grip everything works as usual. Is there something I can do to fix it?

wolfman59#6013•4/1/24, 10:35 AM

hello everyone, I ordered the 57BLF03 motor kit with the card and the USB which I have not yet received, my question is, can the whole thing be configured or should I do it myself?

Virus•4/1/24, 11:27 AM

debug window

VVirus Hi, Walmis, my Winwing adapter stopped working. Basically, I am switching betwe...

walmis•4/1/24, 11:52 AM

Hi, sounds like the mini PCB in the adapter could be damaged - not sure if electrical or mechanical. I can mail you a new one.

Wwolfman59#6013 hello everyone, I ordered the 57BLF03 motor kit with the card and the USB which ...

walmis•4/1/24, 11:53 AM

Hi, what do you mean by "configured" ?

wolfman59#6013•4/1/24, 11:55 AM

in fact are the motors ready for the configuration of the ffb joystick or should it be done once the rhino is completely built?

Wwolfman59#6013 in fact are the motors ready for the configuration of the ffb joystick or should...

walmis•4/1/24, 11:59 AM

Well yeah, you need to build the Rhino to calibrate the axis ranges and so on

walmis•4/1/24, 11:59 AM

But it's mostly plug and play

Wwalmis Well yeah, you need to build the Rhino to calibrate the axis ranges and so on

wolfman59#6013•4/1/24, 12:05 PM

ok ok, I ordered the DIY kit last week, so once it arrives I will be able to finish assembling the rhino and move on to the calibration stage, looking forward to that happening

Thank you Walmis

Wwalmis Hi, sounds like the mini PCB in the adapter could be damaged - not sure if elect...

Virus•4/1/24, 12:27 PM

ok, thanks....let me know how to arrange it

DuraCell•4/1/24, 1:54 PM

my ac adapter connector is kinda loose and sometimes it dissconects during playing from vibration, here is how it looks fully connected

DuraCell•4/1/24, 1:55 PM

DuraCell•4/1/24, 1:55 PM

Any fix for that?

peteg•4/1/24, 4:03 PM

Can someone point me to the directions on how to set individual configurations for different aircraft? Somehow I’ve missed that I’m thinking that it must be possible. Thanks in advance!

Fr4Ged•4/1/24, 4:08 PM

you need to use the WIP build of TelemFFB to be able to change individual configurations

blave549•4/1/24, 5:21 PM

Trying to update TelemFFB, getting the Defender "threat found" again. <sigh.>

Bblave549 Trying to update TelemFFB, getting the Defender "threat found" again. <sigh.>

Number481•4/1/24, 5:30 PM

we've done everything we can to try to avoid it, including writing a custom bootloader for pyinstaller, but its still a crapshoot.

There will be another build shortly that fixes a couple minor things that will probably be fine.

NNumber481 we've done everything we can to try to avoid it, including writing a custom boot...

blave549•4/1/24, 5:31 PM

OK I'll wait for the next build rather than beat my head against the screen. I can't remember what I did last time to get around it. Thanks!

Bblave549 OK I'll wait for the next build rather than beat my head against the screen. I c...

Number481•4/1/24, 5:54 PM

https://discord.com/channels/965234441511383080/1093558100713279508/1224414368406700072 No complaints from my system on the new build

NNumber481 https://discord.com/channels/965234441511383080/1093558100713279508/122441436840...

blave549•4/1/24, 7:45 PM

Confirmed, NAV (Not A Virus) mode enabled

Andre•4/1/24, 11:45 PM

so supposedly I have all the spring settings activated on my stick but for some reason it is not auto-centering. am I missing something?

Number481•4/1/24, 11:49 PM

Andre•4/1/24, 11:49 PM

haha thanks!

Kowalsky•4/2/24, 11:53 AM

Guys, quick question. I got TM Hornet stick, but "CMS press", button 19 is not registering in VP app and in windows game controllers. I don't have TM base to check, is that normal with Rhino base or do I need to change some settings?

mark turner•4/2/24, 12:01 PM

Hi, just setting up my Rhino for the Helo pit, how easy is it to rotate the 5 pin connector so I can turn the base around ( cut off etc to the front) otherwise my stick is backwards....

Mmark turner Hi, just setting up my Rhino for the Helo pit, how easy is it to rotate the 5 pi...

walmis•4/2/24, 12:03 PM

It's easy, just undo those two screws and rotate the socket. The cable inside might not let it lift up, so you might need to open the leather cover to feed in the cable a bit.

KKowalsky Guys, quick question. I got TM Hornet stick, but "CMS press", button 19 is not r...

walmis•4/2/24, 12:03 PM

Other buttons work fine?

Wwalmis Other buttons work fine?

Kowalsky•4/2/24, 12:04 PM

Yes, rest is fine. I've played with grip selection settings but no joy.

walmis•4/2/24, 12:06 PM

No clue, sounds like it could be a wiring issue/fault in the grip itself for that particular input.
It should just work.

Kowalsky•4/2/24, 12:06 PM

I know this from TM manual but I'm not sure if it's the same case with Rhino

walmis•4/2/24, 12:07 PM

could enable the "debug" grip and check if any data changes in the Debug tab window when you depress that button?

Wwalmis could enable the "debug" grip and check if any data changes in the Debug tab win...

Kowalsky•4/2/24, 12:07 PM

Will do

Wwalmis could enable the "debug" grip and check if any data changes in the Debug tab win...

Kowalsky•4/2/24, 12:11 PM

Nothing

Wwalmis It's easy, just undo those two screws and rotate the socket. The cable inside mi...

mark turner•4/2/24, 12:13 PM

OK, figured itt out....

mark turner•4/2/24, 12:14 PM

I had to unclip the connector to lift the plate out enough to rotate it.....

walmis•4/2/24, 12:15 PM

You need to push the cable into the tube

mark turner•4/2/24, 12:16 PM

Just worked that out, cheers walmis...

KKowalsky Nothing

walmis•4/2/24, 12:18 PM

Dunno then, grip doesn't report it for some reason. I can confidently say it's not a problem on the Rhino's side, though

Wwalmis Dunno then, grip doesn't report it for some reason. I can confidently say it's n...

Kowalsky•4/2/24, 12:19 PM

Copy, thanks for help. I will try to replace it.

DuraCell•4/2/24, 2:44 PM

Any tips for my question for ac adapter disconnecting easily. Am I the only one with this issue as there is no one saying anything. Usb adapter is not loose but ac adapter is kinda loose I tied wire down below around my mount so usually it is nit dissconnected but it happened now in last few weeks 2-3 times that during usage wire dissconnects from vibrations I guess. Very frustrating spec when I was playing in VR and just all of a sudden stick goes limp.

DDuraCell Any tips for my question for ac adapter disconnecting easily. Am I the only one ...

walmis•4/2/24, 2:50 PM

Can you make a short vid demonstrating how loose it is?

mark turner•4/2/24, 3:59 PM

Is there a way to offset the grip slightly ( twist it slightly to the left to allow for me mounting it centrally and using my right hand ) In my other simpit, I was using an extension and could turn it using that. In this pit, I am not using an extension. I cant angle the base either due to using the mounting plate which sits at a right angle on a cross member.

Fr4Ged•4/2/24, 4:42 PM

depends on the grip I guess.
you can fasten the Virpil Constellation Alpha however you want to

DuraCell•4/2/24, 6:16 PM

Wwalmis Can you make a short vid demonstrating how loose it is?

DuraCell•4/2/24, 6:16 PM

Here is is

Fierce_Fire•4/2/24, 6:33 PM

isnt that not in all the way?

Having an issue in DCS, I start Telem, fly DCS, and someitmes if I change the plane, I do not get e

Similar Threads

Similar Threads

Similar Threads