VThank you! I was worried! 
VGot it! Paying now! Thank you
N@walmis the bottom nut on my winwing adapter has cracked is there a stl so i can print a new one
SMy apologies if this is the wrong section for this. I’m trying to build a g-seat and the vpforce telem seems like an ideal place to get telemetry across sim platforms. Is there a feasible way for me to export data from VPforceTelem to a usb COM port?
TI’m sure there’s a way to “pass it on” from Telem but that would likely only add latency. The more ideal way would be to pull it directly from the sim in parallel with Telem, instead of getting it from/through Telem. Probably not what you wanted to hear but it would likely be better to do it independently, unless you had Telem directly driving your extra transducers or motors.
SHmm got it. What level of latency are we talking? One potential Avenue could be to make the seat an FFB device and give it the G-effect. (That seems a bit round-about tho.) I’m most of the way to what I need for DCS, getting data out of MSFS and especially IL2 will be trickier
TI don’t have a feeling for what latency it would add but a direct “pull “ would be better. Think of it as a separate thread.
TEventually, I want to add a 2-3 and ultimately a 6DOF motion platform. While the telemetry from the sim (no matter which sim it is) is being queried (or published to) TelemFFB, the outputs are different. I imagine that one could incorporate motion platform outputs into TelemFFB, it’s really designed for controls, rather than motion. That’s my geek understanding of it and it might be incomplete. Having said that, there could exist a super-program that does everything. I just don’t know that such things exist yet.
TBTW, your stick configuration on another thread looks quite impressive, I must say! 
NRather than trying to piggyback on top of TelemFFB, or shoe-horn some additional export functionality into a fork (and then having to try to keep it updated in synch with the main branch)... you'd likely be better off just borrowing the DCS export script and modifying it to suit your telemetry needs.
What TelemFFB does with simconnect is likely way overly complex for what you would want for a G-Seat. I'd recommend just looking at some of the pysimconnect examples on how to get the basic G/Vector telemetry you would want/need.
Similarly with IL2, most of the complexity there is in the decoding of the telemetry stream, which again, you could lift that decode module from TelemFFB.
What TelemFFB does with simconnect is likely way overly complex for what you would want for a G-Seat. I'd recommend just looking at some of the pysimconnect examples on how to get the basic G/Vector telemetry you would want/need.
Similarly with IL2, most of the complexity there is in the decoding of the telemetry stream, which again, you could lift that decode module from TelemFFB.
SGot it! I’ll do more poking into the telem ffb guts. Im firmware savvy, but this stuff will be a bit more of a challenge for me.
Nfeel free to post in https://discord.com/channels/965234441511383080/1123294843079237716 if you have questions about how stuff works
SThank you! I’ve got a lot know mechanical work to do on the seat for the meantime. I’ve got a better sense of my game plan software wise
KHello @walmis I have problem with my DYI Rhino. Yesterday it shutoff when I was dogfighting in DCS. I got this in view in my VpConfigurator, both motors "offline". I pressed reset numerus times, reset pc, removed power but nothing changes. One motors screws were hot so I thought, maybe it need to cool down. But after 7h it's still the same. Resetting profile or motors is not doing anything. What can I do?
WHi, can you measure your power supply?
KI can give it a shoot, how exactly should I do that?
KI have the same PSU as in stock Rhino, Green Cell PRO 19V 9.5A 180W
WYou'd need to measure if 20V is coming to the FFB board with a multimeter
WAlso if there's no LED indication under the motor covers it is most likely power issues
KI can see green led light inside
WI suspect what youre seeing is most likely from the FFB board
WYou'd need to open it up to check
KOk, understood
YDoes vpc mongoose "cm1" supported by rhino?
Y
KOk, issue fixed. It was broken DC socket not giving + to the emergency button and the ffb board. It must fried itself yesterday. Thanks Walmis and @SR-FWinger[73]_David for all the help and support tracking that issue 
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
Syoure very welcome. now good flying again:)
Sall VPC grips are supported.
Also all TM grips.
VKB with adapter and also Winwing with adapter
Also all TM grips.
VKB with adapter and also Winwing with adapter
Sat least i got this info. please correct me if i am wrong;)
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
Yyep i have 2 alphas and 2 TM grips just wondered if the older VPC stick will work due its not listed
Sahh i get it. Walmis will have the answer. Wild guess: it whould work..
WYeah, it should work.
SI'm trying to get my preorder # for my Rhino and ship date for my VKB adapter order #907 from the bot but am only getting this response: "Sorry, I don't know what you mean, try !help" How do I get the bot to understand my request?
SIs it safe to keep the Rhino base connector for the grips unscrewed?
This is in the context of static connector on grips such as TMs and RealSimulators, where the mini-din does not stretch out or rotate. I had some damaging consequences when pairing a static connector (like the Rhino) with a static grip connector (like the Realsim/TM grips).
This is in the context of static connector on grips such as TMs and RealSimulators, where the mini-din does not stretch out or rotate. I had some damaging consequences when pairing a static connector (like the Rhino) with a static grip connector (like the Realsim/TM grips).
Fwell, try the !help command and do as the bot says.
you basically want to use the "!info [your e-mail adress]" command.
you basically want to use the "!info [your e-mail adress]" command.
SJust checked my email and now have tracking # for 907. Thanks!
FI received the new parts for replacement. Thx you very much.
SI would like to find an extension to use with the VPForce VKB adapter. It looks as though the VPC 50/75/100mm adapters might be useable for that purpose. Can anyone confirm that those extensions will accept the VKB adapter threads for mounting to the Rhino?
AI can't confirm, but the Rhino already basically has a built-in extension so if you haven't I suggest you make some actual measurements to make sure you actually need an extension
WYeah, VKB adapter will go on VPC extension without problem
SThanks!
SHas anyone had a problem where you get charged twice at payout?
Shey all, I know for sure I have seen people talk about this before however my brain can't find anything searching for it.
My question is under what setting in the configurator would cause the stick to wobble back and forth as its trying to recentre itself - I have found reducing the spring gain slows it down but i've definitely touched something months ago and can't remember what it was. sometimes now the stick will exponentially wobble itself out of control.
My question is under what setting in the configurator would cause the stick to wobble back and forth as its trying to recentre itself - I have found reducing the spring gain slows it down but i've definitely touched something months ago and can't remember what it was. sometimes now the stick will exponentially wobble itself out of control.
YHow does the shift register board work ? Is it plug and play? Does it have axis outputs?
WIt connects to the 5 pin grip connection and allows to wire up to 32 buttons
WI'd recommend loading up the default Rhino configuration - it's included in
configs directory with the configuratorYThanks is there any simple small board with at least 3 axis small enough to fit into grip supported by the base ? Im trying to avoid external wiring
WIt's possible via a microcontroller https://discord.com/channels/965234441511383080/1185807510993637386
YThat's fantastic thank you !
Wsuper random question