also, is there a way to have the Joystick and Pedals named separately? unfortunately when I choose a

also, is there a way to have the Joystick and Pedals named separately? unfortunately when I choose a USB Device Ident for one, the other gets that name too..

Dddrake1984 also, is there a way to have the Joystick and Pedals named separately? unfortuna...

walmis•5/22/24, 10:31 AM

Change the USB PID to 2054 for pedals and 2055 for Joystick

walmis•5/22/24, 10:31 AM

Windows doesn't support different JS names for the same PID

Wwalmis Change the USB PID to 2054 for pedals and 2055 for Joystick

ddrake1984OP•5/22/24, 10:32 AM

any thought about my other question regarding a self test?

walmis•5/22/24, 10:32 AM

not sure I follow the purpose of the test

ddrake1984OP•5/22/24, 10:34 AM

I was thinking it would be good to see it move from minimum to maximum range to check and visually see if it has consistency in the belt / motor movement etc. putting my feet on it and moving it to maximum I don't want to influence it's own movement

ddrake1984OP•5/22/24, 10:34 AM

this is a brand new, never used rhino (motor) pedals and I want to make sure it's all working as expected

AndyHill•5/22/24, 10:35 AM

self calibration would be cool

ddrake1984OP•5/22/24, 10:37 AM

WhereNoLarkFlew•5/22/24, 11:55 AM

Aluminum grip shipped for me this morning, thanks @walmis for the quick response - I know you’re keeping busy, I appreciate the help. Looking forward to trying the Rhino soon.

WhereNoLarkFlew•5/22/24, 11:58 AM

If there’s no guide on swapping grips I can take some pics and post here at some point if anyone is interested

Fer•5/22/24, 1:20 PM

Hey how can I get those pedals ??

TTouch_Of_Legend You have to select T50CM2 and then it shows the brake (pinky trigger) as an Axis...

superbird1011•5/22/24, 2:25 PM

The brake axis doesnt work on mine i can see it says brake axis but doesn’t register

superbird1011•5/22/24, 2:28 PM

@walmis

Dddrake1984 I was thinking it would be good to see it move from minimum to maximum range to ...

Number481•5/22/24, 3:40 PM

I have a little tester app I wrote that can do this... its not very polished though

I wrote it for myself as an easy way to play around with different combinations of effects and forces when writing new effects. I can send you a copy if you want (no warranty expressed or implied

)

Number481•5/22/24, 3:42 PM

peteg•5/22/24, 5:07 PM

When I bank left or right there seems to be some inertia that carries the stick further into the turn than it should. I would think that the inertia setting would fix this but I haven’t had luck with that yet. Can anyone suggest what setting I might want to tweak?

NNumber481 No, that’s completely unrelated to the joystick. IL2 doesn’t even know it’s rela...

Asger•5/22/24, 5:17 PM

Hi @Number481 I solved it. Indeed my problem was that IL2 already had 8 devices identified. Not sure when IL2 included the Winwing MIP screens but yes, that was the issue. The post you gave me was actually not necessary but gave me the info I needed. It was as simple as opening the IL-2 Sturmovik Great Battles\data\input\devices.txt and delete all unnecessary devices. Then open IL2 and map the Rhino as usual. Great info, thanks very much!!!

AAsger Hi @Number481 I solved it. Indeed my problem was that IL2 already had 8 devices ...

RustBelt•5/22/24, 6:23 PM

Yea I ran into that one with IL2. I had to do some wild contortions of Joystick “melding” to stick with their mind shatteringly primitive DirectInput Windows 97 limitations.

NNumber481 Click to see attachment

Fr4Ged•5/22/24, 6:34 PM

oooh....could you please send me a copy of that one, please? been looking for something like that!

NNumber481 I have a little tester app I wrote that can do this... its not very polished th...

Kowalsky•5/22/24, 6:49 PM

I would like to try it

NNumber481 I have a little tester app I wrote that can do this... its not very polished th...

Touch_Of_Legend•5/22/24, 8:21 PM

Did you say Tester…

Duchess ✈•5/22/24, 8:40 PM

I busted this part.... please help!!!

Duchess ✈•5/22/24, 8:40 PM

Duchess ✈•5/22/24, 8:42 PM

@walmis how can I replace this?

Bob Bushman•5/22/24, 8:54 PM

Gently bend the pins back, and gingerly reattach it

NNumber481 I have a little tester app I wrote that can do this... its not very polished th...

ddrake1984OP•5/22/24, 9:10 PM

If it’s safe enough for you to use, id be happy to give it a go

BBob Bushman Gently bend the pins back, and gingerly reattach it 🤷

Duchess ✈•5/22/24, 9:27 PM

Yep. Trying to. So far the joystick buttons are not responding.

Dddrake1984 If it’s safe enough for you to use, id be happy to give it a go

Number481•5/22/24, 9:45 PM

It’s safe enough. It totally won’t hijack your GPU and start mining crypto and sending it to my wallet or anything….

But it will do to your device whatever you tell it to.

It’s in a GH repo but it’s been a while since I updated that with any of my local changes. I’ll update the repo and post a build to GH and send you guys that asked a link to it later this evening when I get back home.

Number481•5/23/24, 3:26 AM

@=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/RhinoTester I posted a build in the releases. Read the readme page for basic usage

ddrake1984OP•5/23/24, 3:47 AM

Ill try this when I get home, much appreciated

CapnFlint•5/23/24, 3:47 AM

The 3D printed collar on my VKB adapter just snapped off. Is there a way to order a new one or get the file to print a new one?

Toddimus•5/23/24, 4:30 AM

I’m not using the 3d printed part for my DIY. If you’re near California, I can send you mine.

Toddimus•5/23/24, 4:38 AM

Send me a DM, if you’re interested. I don’t need any money for it.

NNumber481 @=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/...

ddrake1984OP•5/23/24, 7:23 AM

I have tried to run the .py and the .bat file - but nothing loads

kaltokri•5/23/24, 9:55 AM

Hi guys. I finished my Rhino this week and it is fantastic.
But I have some questions:

Runway Rumble effect in DCS F/A-18C is much weaker then in A-10C(II) and F-16C. Even if I put it on 100% (compared to 30% in A-10CII). Is it a bug or a feature? Or did I something wrong?
I don't understand Trimmer in Ka-50(_3). I set it to Instant like shown in the manual. But it feels weird. I would have thought that after trimming the stick would stay in position and neutralize the forces. But it still pulls backwards.
Any Tipps are very welcome.

NNumber481 @=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/...

Touch_Of_Legend•5/23/24, 9:59 AM

I will test the test program later!

Again and as always thanks for what you do… The Rhino is only a device or a “really cool DIY” without constant adjustments and updates.. So I appreciate everyone of you guys who are out here kicking ass on this project on the communities behalf

Touch_Of_Legend•5/23/24, 10:00 AM

Busy today… Our youngest graduates from kindergarten!

Dddrake1984 I have tried to run the .py and the .bat file - but nothing loads

Number481•5/23/24, 10:37 AM

OK, but did you try the build i put in the releases?

NNumber481 OK, but did you try the build i put in the releases? 🙂

ddrake1984OP•5/23/24, 10:38 AM

hmm.. did I click the wrong thing?

ddrake1984OP•5/23/24, 10:39 AM

I don't see a build

Dddrake1984 hmm.. did I click the wrong thing?

Number481•5/23/24, 10:40 AM

Its like TelemFFB... you could download the repo and run it from source, or you can download the exe I compiled

ddrake1984OP•5/23/24, 10:40 AM

I only saw .zip. is there an exe somewhere?

Number481•5/23/24, 10:40 AM

ddrake1984OP•5/23/24, 10:40 AM

ah, there it is, thank you

ddrake1984OP•5/23/24, 10:41 AM

ah, it works!

ddrake1984OP•5/23/24, 10:41 AM

ok, I need to hook things back up and test

ddrake1984OP•5/23/24, 10:48 AM

not sure how I can get the periodic to work so that it does it's own minimum to maximum movement by itself. unless I misunderstand that one.. the spring effect works well when I drag it tho

Number481•5/23/24, 10:51 AM

periodic is just a shaker effect. The only thing in there that will "move the axis" is the spring force (and then moving the crosshairs)

ddrake1984OP•5/23/24, 10:51 AM

honestly, this works very well. thank you

Kowalsky•5/23/24, 11:45 AM

It's working great, thanks!

also, is there a way to have the Joystick and Pedals named separately? unfortunately when I choose a

Similar Threads