@=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/RhinoTester I post

@=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/RhinoTester I posted a build in the releases. Read the readme page for basic usage

ddrake1984•5/23/24, 3:47 AM

Ill try this when I get home, much appreciated

CapnFlint•5/23/24, 3:47 AM

The 3D printed collar on my VKB adapter just snapped off. Is there a way to order a new one or get the file to print a new one?

Toddimus•5/23/24, 4:30 AM

I’m not using the 3d printed part for my DIY. If you’re near California, I can send you mine.

Toddimus•5/23/24, 4:38 AM

Send me a DM, if you’re interested. I don’t need any money for it.

NNumber481 @=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/...

ddrake1984•5/23/24, 7:23 AM

I have tried to run the .py and the .bat file - but nothing loads

kaltokri•5/23/24, 9:55 AM

Hi guys. I finished my Rhino this week and it is fantastic.
But I have some questions:

Runway Rumble effect in DCS F/A-18C is much weaker then in A-10C(II) and F-16C. Even if I put it on 100% (compared to 30% in A-10CII). Is it a bug or a feature? Or did I something wrong?
I don't understand Trimmer in Ka-50(_3). I set it to Instant like shown in the manual. But it feels weird. I would have thought that after trimming the stick would stay in position and neutralize the forces. But it still pulls backwards.
Any Tipps are very welcome.

NNumber481 @=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/...

Touch_Of_Legend•5/23/24, 9:59 AM

I will test the test program later!

Again and as always thanks for what you do… The Rhino is only a device or a “really cool DIY” without constant adjustments and updates.. So I appreciate everyone of you guys who are out here kicking ass on this project on the communities behalf

Touch_Of_Legend•5/23/24, 10:00 AM

Busy today… Our youngest graduates from kindergarten!

Dddrake1984 I have tried to run the .py and the .bat file - but nothing loads

Number481OP•5/23/24, 10:37 AM

OK, but did you try the build i put in the releases?

NNumber481 OK, but did you try the build i put in the releases? 🙂

ddrake1984•5/23/24, 10:38 AM

hmm.. did I click the wrong thing?

ddrake1984•5/23/24, 10:39 AM

I don't see a build

Dddrake1984 hmm.. did I click the wrong thing?

Number481OP•5/23/24, 10:40 AM

Its like TelemFFB... you could download the repo and run it from source, or you can download the exe I compiled

ddrake1984•5/23/24, 10:40 AM

I only saw .zip. is there an exe somewhere?

Number481OP•5/23/24, 10:40 AM

ddrake1984•5/23/24, 10:40 AM

ah, there it is, thank you

ddrake1984•5/23/24, 10:41 AM

ah, it works!

ddrake1984•5/23/24, 10:41 AM

ok, I need to hook things back up and test

ddrake1984•5/23/24, 10:48 AM

not sure how I can get the periodic to work so that it does it's own minimum to maximum movement by itself. unless I misunderstand that one.. the spring effect works well when I drag it tho

Number481OP•5/23/24, 10:51 AM

periodic is just a shaker effect. The only thing in there that will "move the axis" is the spring force (and then moving the crosshairs)

ddrake1984•5/23/24, 10:51 AM

honestly, this works very well. thank you

Kowalsky•5/23/24, 11:45 AM

It's working great, thanks!

kaltokri•5/23/24, 11:48 AM

@walmis Maybe it would be good to switch support channel to a forum (like knowledge-base and wishlist) to have a bit more structure in support requests?

Kkaltokri Hi guys. I finished my Rhino this week and it is fantastic. But I have some ques...

walmis•5/23/24, 11:54 AM

Yes that's because of the gear strut data is different, you might need to tune it for specific aircraft to achieve optimal feel
Make sure you don't have any axis curves set in DCS, the stick should stay in the trimmed position if configured properly. To debug - follow the blue circle in the VP configurator, it displays the trimmed position. And the dot displays the actual stick position.

kaltokri•5/23/24, 11:57 AM

Make sure you don't have any axis curves set in DCS

Ok. I added a 20% curve like I did with my Virpil. Maybe add this to the manual in the Ka-50 section.
Thank you very much!

JakeSixx33 | 744 |•5/23/24, 12:02 PM

I have had a couple week break from DCS. I came back and was prompted to update telem. Usually it brings my profiles in. This time it did not. Does the current build have a way to import them? Are we still using a config.user.ini? Sorry I tried reading back last night and didn't find anything that helped.

JJakeSixx33 | 744 |I have had a couple week break from DCS. I came back and was prompted to update ...

Number481OP•5/23/24, 12:12 PM

no, the user ini files were from the old non UI based config model. The config in the new version is stored in an xml file in your AppData folder.

The user configuration is carried forward from release to release, as are the system settings (which are stored in the registry).

The only exception to this is this specific release where the format of the system settings stored in registry has changed. Per the release notes, You will need to re-configure your system settings. All of your model settings will be retained.

NNumber481 no, the user ini files were from the old non UI based config model. The config ...

JakeSixx33 | 744 |•5/23/24, 12:34 PM

First I appreciate all you and Walmis have done to make the Rhino and Telem a better product with each release. That being said you have a much more intimate understanding of how all this works, than the mere user. I read the same blurb in the release notes. It doesn't tell me what to do. When I ran Telem I had to reconnect to DCS and in the lower right there seems to be a pointer to profiles, which won't let you point to the folder containing them. Do I need to re setup the entire configurator and/or telem?

JJakeSixx33 | 744 |First I appreciate all you and Walmis have done to make the Rhino and Telem a be...

Number481OP•5/23/24, 12:45 PM

Those are for configurator profiles that you want to push to your device when TelemFFB starts or exits, they are a convenience feature and you don't need to use them if you don't have a need/desire to leave your Rhino with a different setup depending if you are/are not running TelemFFB. Those settings have nothing to do with individual model effect settings.

You can read about the dynamic configurator profile assignment in the manual here: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.hlw8w12wb0nz

Google Docs

VPforce Rhino Manual

VPforce RHINO FFB User Manual Version 0.7 (WIP) Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3. The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Updating th...

slowmover•5/23/24, 3:55 PM

Anyone knows what is this error?

Sslowmover Anyone knows what is this error?

Number481OP•5/23/24, 3:57 PM

did you copy the EXE instead of creating a shortcut?

slowmover•5/23/24, 3:57 PM

this came up after i did an update

slowmover•5/23/24, 3:58 PM

i think now i am okay

slowmover•5/23/24, 3:59 PM

it was an antivirus problem

Number481OP•5/23/24, 3:59 PM

ahh... that ol' bugger

slowmover•5/23/24, 4:00 PM

i guess i am updated now

Littlesack•5/24/24, 12:34 AM

Is anyone running all sliders in vp software at or near 100? Is it even possible? For me it seems impossible to set anything at 100 without getting the beep error. Even the tiniest stick movement will cause the beep and the stick will flop over. It's making the process of fine tuning settings very difficult especially when adding telemffb into the mix and not knowing exactly which setting is the likely cause. I fly dcs and msfs.

PiNKSH!T•5/24/24, 12:43 AM

I believe stick height/weight has a bit to do with it but different ppl can get instability at different settings. But I don't think anyone has all sliders set to 100%.

PiNKSH!T•5/24/24, 12:43 AM

PiNKSH!T•5/24/24, 12:43 AM

that's my settings tab for the F-18 in DCS

PiNKSH!T•5/24/24, 12:44 AM

PiNKSH!T•5/24/24, 12:44 AM

Effects Tab

PiNKSH!T•5/24/24, 12:45 AM

if you are getting too much instability try lowering the settings in the Expert section of Settings Tab

PiNKSH!T•5/24/24, 12:45 AM

but you should ask Walmis before messing around too much with those

PiNKSH!T•5/24/24, 12:46 AM

ppl usually find Friction to be a cause of instability same with Inertia.

LLittlesack Is anyone running all sliders in vp software at or near 100? Is it even possible...

PiNKSH!T•5/24/24, 12:46 AM

Littlesack•5/24/24, 1:13 AM

How can I know which setting to lower and if I should do it in vpforce or telemffb?

LLittlesack How can I know which setting to lower and if I should do it in vpforce or telemf...

PiNKSH!T•5/24/24, 1:41 AM

vpforce config is for your "global settings" Telemffb is to tweak the effects per aircraft (tbh I'm still on the older telemffb app)

PiNKSH!T•5/24/24, 1:43 AM

basically the Settings Tab is where you set the overall limits for the base, then the Effects Tab is where you set what % of those limits the base will let the sim use eg. If you set the Spring to 100% in Settings Tab then to 50% in the Effects Tab the sim will be able to use 50% of the 100% Spring force.

PiNKSH!T•5/24/24, 1:44 AM

So a Spring setting of 100% then the effect spring setting at 10% will only let the sim use 10% of the overall Spring "power"

PiNKSH!T•5/24/24, 1:46 AM

Friction & Inertia (at least for my set up) seem to cause the most instability, you see on my Setting Tab Friction is set to only 10% then in the Effects Tab Friction is only 10%, so that is only using 10% of 10% if you get what I mean.

@=RS= ddrake1984 @Touch_Of_Legend @Kowalsky @Fr4Ged https://github.com/mjfrisby/RhinoTester I post

Similar Threads

Similar Threads

Similar Threads