I have tried to run the .py and the .bat file - but nothing loads
I have tried to run the .py and the .bat file - but nothing loads
KHi guys. I finished my Rhino this week and it is fantastic.
But I have some questions:
But I have some questions:
- Runway Rumble effect in DCS F/A-18C is much weaker then in A-10C(II) and F-16C. Even if I put it on 100% (compared to 30% in A-10CII). Is it a bug or a feature? Or did I something wrong?
- I don't understand Trimmer in Ka-50(_3). I set it to Instant like shown in the manual. But it feels weird. I would have thought that after trimming the stick would stay in position and neutralize the forces. But it still pulls backwards.
Any Tipps are very welcome.
TI will test the test program later!
Again and as always thanks for what you do… The Rhino is only a device or a “really cool DIY” without constant adjustments and updates.. So I appreciate everyone of you guys who are out here kicking ass on this project on the communities behalf
Again and as always thanks for what you do… The Rhino is only a device or a “really cool DIY” without constant adjustments and updates.. So I appreciate everyone of you guys who are out here kicking ass on this project on the communities behalf
TBusy today… Our youngest graduates from kindergarten!
NOK, but did you try the build i put in the releases? 
Dhmm.. did I click the wrong thing?
DI don't see a build
NIts like TelemFFB... you could download the repo and run it from source, or you can download the exe I compiled
DI only saw .zip. is there an exe somewhere?
N
Dah, there it is, thank you
Dah, it works!
Dok, I need to hook things back up and test
Dnot sure how I can get the periodic to work so that it does it's own minimum to maximum movement by itself. unless I misunderstand that one.. the spring effect works well when I drag it tho
Nperiodic is just a shaker effect. The only thing in there that will "move the axis" is the spring force (and then moving the crosshairs)
Dhonestly, this works very well. thank you
KIt's working great, thanks!
K@walmis Maybe it would be good to switch support channel to a forum (like knowledge-base and wishlist) to have a bit more structure in support requests?
W- Yes that's because of the gear strut data is different, you might need to tune it for specific aircraft to achieve optimal feel
- Make sure you don't have any axis curves set in DCS, the stick should stay in the trimmed position if configured properly. To debug - follow the blue circle in the VP configurator, it displays the trimmed position. And the dot displays the actual stick position.
KMake sure you don't have any axis curves set in DCSOk. I added a 20% curve like I did with my Virpil. Maybe add this to the manual in the Ka-50 section.
Thank you very much!
JI have had a couple week break from DCS. I came back and was prompted to update telem. Usually it brings my profiles in. This time it did not. Does the current build have a way to import them? Are we still using a config.user.ini? Sorry I tried reading back last night and didn't find anything that helped.
Nno, the user ini files were from the old non UI based config model. The config in the new version is stored in an xml file in your AppData folder.
The user configuration is carried forward from release to release, as are the system settings (which are stored in the registry).
The only exception to this is this specific release where the format of the system settings stored in registry has changed. Per the release notes, You will need to re-configure your system settings. All of your model settings will be retained.
The user configuration is carried forward from release to release, as are the system settings (which are stored in the registry).
The only exception to this is this specific release where the format of the system settings stored in registry has changed. Per the release notes, You will need to re-configure your system settings. All of your model settings will be retained.
JFirst I appreciate all you and Walmis have done to make the Rhino and Telem a better product with each release. That being said you have a much more intimate understanding of how all this works, than the mere user. I read the same blurb in the release notes. It doesn't tell me what to do. When I ran Telem I had to reconnect to DCS and in the lower right there seems to be a pointer to profiles, which won't let you point to the folder containing them. Do I need to re setup the entire configurator and/or telem?
NThose are for configurator profiles that you want to push to your device when TelemFFB starts or exits, they are a convenience feature and you don't need to use them if you don't have a need/desire to leave your Rhino with a different setup depending if you are/are not running TelemFFB. Those settings have nothing to do with individual model effect settings.
You can read about the dynamic configurator profile assignment in the manual here: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.hlw8w12wb0nz
You can read about the dynamic configurator profile assignment in the manual here: https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.hlw8w12wb0nz
Google Docs
VPforce RHINO FFB User Manual Version 0.7 (WIP) Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3. The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Updating th...
SAnyone knows what is this error?
Ndid you copy the EXE instead of creating a shortcut?
Sthis came up after i did an update
Si think now i am okay
Sit was an antivirus problem
Nahh... that ol' bugger
Si guess i am updated now
LIs anyone running all sliders in vp software at or near 100? Is it even possible? For me it seems impossible to set anything at 100 without getting the beep error. Even the tiniest stick movement will cause the beep and the stick will flop over. It's making the process of fine tuning settings very difficult especially when adding telemffb into the mix and not knowing exactly which setting is the likely cause. I fly dcs and msfs.
PI believe stick height/weight has a bit to do with it but different ppl can get instability at different settings. But I don't think anyone has all sliders set to 100%.
P
Pthat's my settings tab for the F-18 in DCS
P
PEffects Tab
Pif you are getting too much instability try lowering the settings in the Expert section of Settings Tab
Pbut you should ask Walmis before messing around too much with those
Pppl usually find Friction to be a cause of instability same with Inertia.
LHow can I know which setting to lower and if I should do it in vpforce or telemffb?
Pvpforce config is for your "global settings" Telemffb is to tweak the effects per aircraft (tbh I'm still on the older telemffb app)
Pbasically the Settings Tab is where you set the overall limits for the base, then the Effects Tab is where you set what % of those limits the base will let the sim use eg. If you set the Spring to 100% in Settings Tab then to 50% in the Effects Tab the sim will be able to use 50% of the 100% Spring force.
PSo a Spring setting of 100% then the effect spring setting at 10% will only let the sim use 10% of the overall Spring "power"
PFriction & Inertia (at least for my set up) seem to cause the most instability, you see on my Setting Tab Friction is set to only 10% then in the Effects Tab Friction is only 10%, so that is only using 10% of 10% if you get what I mean.
PFrom my understanding (I may be wrong talk to Walmis) the Expert Settings Hz seem to be the power ie. electrical power to the motor for those effects.
LI have trouble understanding why the settings can seemingly go so far beyond the capability of the hardware. Why do we have to limit anything so far below the maximum just to avoid getting an error? If 100 was the true maximum for any setting this process would be much easier.
PYeah obviously Walmis would be the guy to answer that one but I gues it depends on the settings combination. Have you tried all the sliders in the Settings tab to 100% then Effects Tab put everything on like 1% & work up from there in small increments. Keep in mind that I have Friction on 10% of 10% so you will need to work the settings up in very small amounts.
TWith my dual 8604 “Greater One-Horned Rhino “ and my 8604 TPR FFB pedals, I’m at 100% on all sliders. But they are different animals than the “Common Rhino”. 
T