Yeah that’s what I love bout the Rhino… soooooooo many set ups. I’m mounting it to a pedestal and u

Yeah that’s what I love bout the Rhino… soooooooo many set ups.

I’m mounting it to a pedestal and using the full 22degrees because she’s basically in the tunnel between my legs just like the natural position

SSamNFTY Signed up back in November

Diverzant•6/4/24, 2:42 PM

You got yours in 6 nonths? I need your luck in my life

Red Magic•6/4/24, 2:42 PM

I still have to figure out a setup to
1) hold the rhino
2) adapt to a swivel gaming chair
3) be easy to destruct and pack up in a pinch

DDiverzant You got yours in 6 nonths? I need your luck in my life 😅

Touch_Of_LegendOP•6/4/24, 2:43 PM

A lot of folks back out or fall off the list for one reason or another and that moves people up, up, up.

TTouch_Of_Legend Yeah that’s what I love bout the Rhino… soooooooo many set ups. I’m mounting it...

Bob Bushman•6/4/24, 2:43 PM

Not to mention you can custom tune your settings for each module, and telemffb apply it when loaded.

Touch_Of_LegendOP•6/4/24, 2:44 PM

It’s a WIP but here’s the set up….

Touch_Of_LegendOP•6/4/24, 2:45 PM

Perfect fulcrum on the thigh at full deflection in every direction.

She’s dead perfect

TTouch_Of_Legend A lot of folks back out or fall off the list for one reason or another and that ...

Diverzant•6/4/24, 2:45 PM

Yeah, thought so. Whiever is 1538, bad luck mate I aint giving up

RRed Magic I still have to figure out a setup to 1) hold the rhino 2) adapt to a swivel gam...

Touch_Of_LegendOP•6/4/24, 2:46 PM

You can see what I’m doing (above)

FFr4Ged wait...that means you must have preordered in September as well? I received my R...

Cowboy10uk•6/4/24, 2:47 PM

Yep. Guess it’s just luck of the drawer.

. Think I was 859 in the orders initially but recieved 539 so I’m guessing quite a few dropped out before me.

TTouch_Of_Legend It’s a WIP but here’s the set up….

nubbins•6/4/24, 2:48 PM

straight grip, no rotation?

SamNFTY•6/4/24, 2:49 PM

You mistake timing for luck.

RRed Magic I still have to figure out a setup to 1) hold the rhino 2) adapt to a swivel gam...

nubbins•6/4/24, 2:49 PM

there are a few places these days selling a gas tube with a rotation lock

nubbins•6/4/24, 2:50 PM

I saw one somewhere but didn't pull the trigger, and predator mounts is also working on one, or the one from monstertech

RRed Magic I still have to figure out a setup to 1) hold the rhino 2) adapt to a swivel gam...

Cowboy10uk•6/4/24, 2:55 PM

I’m looking at this solution at the mo. Does everything you’re asking, just monstertech prices sadly. Their stuff is certainly worth it though.

https://www.monster.tech/en/product/center-joystick-chair-mount/

MTSIM – MONSTERTECH

Center Joystick Chair Mount – MTSIM – MONSTERTECH

Center joystick mount for attachment to various office chairs. Quick and easy to remove. Can be adjusted for different joystick configurations.

CCowboy10uk I’m looking at this solution at the mo. Does everything you’re asking, just m...

SamNFTY•6/4/24, 2:56 PM

I have that chair. I thoroughly enjoy it

CCowboy10uk I’m looking at this solution at the mo. Does everything you’re asking, just m...

Red Magic•6/4/24, 2:56 PM

Considering the weight and torque I'm hesitant to get something that's directly and only mounted to the chair, for the rhino

SamNFTY•6/4/24, 2:56 PM

Red Magic•6/4/24, 2:57 PM

Preferably I have the rhino stabilized on the floor in some way

SSamNFTY I have that chair. I thoroughly enjoy it

Cowboy10uk•6/4/24, 2:57 PM

Sweet, only looking at the Mount at the moment though. Wife would kill me if I get a new chair as well.

SSamNFTY Click to see attachment

Cowboy10uk•6/4/24, 2:58 PM

Ahhh someone else who uses the multipurpose UFC I see.

CCowboy10uk Sweet, only looking at the Mount at the moment though. Wife would kill me if I g...

Diverzant•6/4/24, 2:58 PM

Yeah but if you dont get the chair your back may start hurting so you cant do the vacuuming anymore

CCowboy10uk Sweet, only looking at the Mount at the moment though. Wife would kill me if I g...

SamNFTY•6/4/24, 2:58 PM

The chair is really solid. When I had my mounts on another chair, the chair was the weakest link by far

CCowboy10uk Ahhh someone else who uses the multipurpose UFC I see.

SamNFTY•6/4/24, 2:58 PM

Absolutely love it

Cowboy10uk•6/4/24, 2:58 PM

Just had to remove mine from the cockpit, as the throw from the rhino kept hitting it.

Hence looking for different mounting so,unions at the mo

CCowboy10uk Just had to remove mine from the cockpit, as the throw from the rhino kept hitti...

SamNFTY•6/4/24, 2:59 PM

I hope mine is mounted far enough out to not cause that

Cowboy10uk•6/4/24, 3:01 PM

Before and after photos of the current setup

RRed Magic Preferably I have the rhino stabilized on the floor in some way

Touch_Of_LegendOP•6/4/24, 3:03 PM

Here is the make shift pedestal I’m making.

I’ll cut and carpet the base board same as the chair.

Metal plate is the foot rest for the pedal mount.

Easy peasy little pedestal with some drawers to hold the extras and cords or whatever you’re not using.

Like I said it’s WIP so don’t judge me but yeah.. Solid mount is what I’m after as well

CCowboy10uk Before and after photos of the current setup

SamNFTY•6/4/24, 3:03 PM

Crosswinds as well. Noice!

Cowboy10uk•6/4/24, 3:03 PM

The Rhino is currently on the mounts lowest setting, but is way to high realistically. So figure mounting it on the chair lower down, will mean the not only is it in the correct height but it won’t hit the ufc. Win win.

SSamNFTY Crosswinds as well. Noice!

Cowboy10uk•6/4/24, 3:04 PM

Thankyou, old ones, V2s that I’ve added the new piston mod to.

TTouch_Of_Legend Here is the make shift pedestal I’m making. I’ll cut and carpet the base board...

Cowboy10uk•6/4/24, 3:05 PM

Ohhh wheel stand pro, nice. That might be an idea then. Currently only use mine for the pedals and collective

CCowboy10uk Ohhh wheel stand pro, nice. That might be an idea then. Currently only use m...

Touch_Of_LegendOP•6/4/24, 3:08 PM

Yep I see yours hiding in there hahaha

But yeah it would move it down and closer to the crotch as well

(NOT TO CLOSE)

But man mine feels so perfect when I do a mock roll up for full control surface deflection check..

Like she’s perfect

RRed Magic Preferably I have the rhino stabilized on the floor in some way

Number481•6/4/24, 3:17 PM

Pretty happy with my ghetto 2x4 + plywood modified Virpil desk mount. I recently replaced the adjustable furniture legs I was using (because they were wobbly) with a small plywood pedestal which is secured to the floor with 3m micro suction “tape”.

Pretty easy to disconnect from the desk and pop it off the floor if needed.

NNumber481 Pretty happy with my ghetto 2x4 + plywood modified Virpil desk mount. I recentl...

Touch_Of_LegendOP•6/4/24, 3:29 PM

Yeah man I love this! Plus you know I’m all about some DIY hahaha that’s how I roll

I/JG7_Moto•6/4/24, 4:07 PM

@walmis How hard would it be to add a second dial to control each motor separately? I have the factory assembled version. Sometimes I feel the pitch forces are weaker than aileron forces, I have modified the graph and that helped somehow but having a dial would be a lot easier.

Vulture•6/4/24, 4:08 PM

What is the "Machined Aluminum Grip Mount Upgrade for Rhino, Anodized, Black - 49€+VAT" on the order form? is it needed for TMWH compatible grips and extensions?

II/JG7_Moto @walmis How hard would it be to add a second dial to control each motor separate...

Red Magic•6/4/24, 4:11 PM

Hey Moto! For warbirds a lot of the time the ailerons would stiffen up more than the pitch control, since pulleys and bobweights were more optimized for such. So the difference between the two in this case for WW2 is I think generally ok, without pulling out a calculator

Red Magic•6/4/24, 4:12 PM

In a non-FFB configuration, you can see in a diving P51 for instance that rudder and ailerons will constrict in control in DCS before the elevators

Red Magic•6/4/24, 4:13 PM

Reminds me, ffb MFGs

RRed Magic Hey Moto! For warbirds a lot of the time the ailerons would stiffen up more tha...

I/JG7_Moto•6/4/24, 4:26 PM

True, but still think pitch control could be a bit stiffer than it is, specially the initial pull which is too soft, compared to how stiff roll is represented in FFB, which I think its really well modeled. This is how it feels IRL in the warbird I fly.