A lot of folks back out or fall off the list for one reason or another and that moves people up, up,
A lot of folks back out or fall off the list for one reason or another and that moves people up, up, up.
BNot to mention you can custom tune your settings for each module, and telemffb apply it when loaded.
TIt’s a WIP but here’s the set up….
TPerfect fulcrum on the thigh at full deflection in every direction.
She’s dead perfect
She’s dead perfect
DYeah, thought so. Whiever is 1538, bad luck mate I aint giving up 
TYou can see what I’m doing (above)
CYep. Guess it’s just luck of the drawer. 
. Think I was 859 in the orders initially but recieved 539 so I’m guessing quite a few dropped out before me.
. Think I was 859 in the orders initially but recieved 539 so I’m guessing quite a few dropped out before me.
Nstraight grip, no rotation?
SYou mistake timing for luck.
Nthere are a few places these days selling a gas tube with a rotation lock
NI saw one somewhere but didn't pull the trigger, and predator mounts is also working on one, or the one from monstertech
CI’m looking at this solution at the mo. Does everything you’re asking, just monstertech prices sadly. Their stuff is certainly worth it though.
https://www.monster.tech/en/product/center-joystick-chair-mount/
https://www.monster.tech/en/product/center-joystick-chair-mount/
MTSIM – MONSTERTECH
Center joystick mount for attachment to various office chairs. Quick and easy to remove. Can be adjusted for different joystick configurations.
SI have that chair. I thoroughly enjoy it
RConsidering the weight and torque I'm hesitant to get something that's directly and only mounted to the chair, for the rhino
S
RPreferably I have the rhino stabilized on the floor in some way
CSweet, only looking at the Mount at the moment though. Wife would kill me if I get a new chair as well.
CAhhh someone else who uses the multipurpose UFC I see.
DYeah but if you dont get the chair your back may start hurting so you cant do the vacuuming anymore
SThe chair is really solid. When I had my mounts on another chair, the chair was the weakest link by far
SAbsolutely love it
CJust had to remove mine from the cockpit, as the throw from the rhino kept hitting it.
Hence looking for different mounting so,unions at the mo
Hence looking for different mounting so,unions at the mo
SI hope mine is mounted far enough out to not cause that
CBefore and after photos of the current setup
THere is the make shift pedestal I’m making.
I’ll cut and carpet the base board same as the chair.
Metal plate is the foot rest for the pedal mount.
Easy peasy little pedestal with some drawers to hold the extras and cords or whatever you’re not using.
Like I said it’s WIP so don’t judge me but yeah.. Solid mount is what I’m after as well
I’ll cut and carpet the base board same as the chair.
Metal plate is the foot rest for the pedal mount.
Easy peasy little pedestal with some drawers to hold the extras and cords or whatever you’re not using.
Like I said it’s WIP so don’t judge me but yeah.. Solid mount is what I’m after as well
SCrosswinds as well. Noice!
CThe Rhino is currently on the mounts lowest setting, but is way to high realistically. So figure mounting it on the chair lower down, will mean the not only is it in the correct height but it won’t hit the ufc. Win win.
CThankyou, old ones, V2s that I’ve added the new piston mod to.
COhhh wheel stand pro, nice. That might be an idea then. Currently only use mine for the pedals and collective
TYep I see yours hiding in there hahaha
But yeah it would move it down and closer to the crotch as well
(NOT TO CLOSE)
But man mine feels so perfect when I do a mock roll up for full control surface deflection check..
Like she’s perfect
But yeah it would move it down and closer to the crotch as well
(NOT TO CLOSE)
But man mine feels so perfect when I do a mock roll up for full control surface deflection check..
Like she’s perfect
NPretty happy with my ghetto 2x4 + plywood modified Virpil desk mount. I recently replaced the adjustable furniture legs I was using (because they were wobbly) with a small plywood pedestal which is secured to the floor with 3m micro suction “tape”.
Pretty easy to disconnect from the desk and pop it off the floor if needed.
Pretty easy to disconnect from the desk and pop it off the floor if needed.
TYeah man I love this! Plus you know I’m all about some DIY hahaha that’s how I roll
I@walmis How hard would it be to add a second dial to control each motor separately? I have the factory assembled version. Sometimes I feel the pitch forces are weaker than aileron forces, I have modified the graph and that helped somehow but having a dial would be a lot easier.
VWhat is the "Machined Aluminum Grip Mount Upgrade for Rhino, Anodized, Black - 49€+VAT" on the order form? is it needed for TMWH compatible grips and extensions?
RHey Moto! For warbirds a lot of the time the ailerons would stiffen up more than the pitch control, since pulleys and bobweights were more optimized for such. So the difference between the two in this case for WW2 is I think generally ok, without pulling out a calculator
RIn a non-FFB configuration, you can see in a diving P51 for instance that rudder and ailerons will constrict in control in DCS before the elevators
RReminds me, ffb MFGs 
ITrue, but still think pitch control could be a bit stiffer than it is, specially the initial pull which is too soft, compared to how stiff roll is represented in FFB, which I think its really well modeled. This is how it feels IRL in the warbird I fly.
TIt’s an upgrade to the grip attachment threads from 3D printed to Aluminum.
TBoth the stock 3D printed and aluminum versions are compatible with TM and Virpil grips.
VOK, thanks!
BDo you guys have a deadzone set to your Rhino (in the Rhino settings software, not dcs controls)?
Ano
RNo
BCool , ok.
V:package: 
RHINO #0565 Has Shipped!
RHINO #0565 Has Shipped!V:package: 
RHINO #0567 Has Shipped!
RHINO #0567 Has Shipped!DOnly 971 to go 
SThey're getting out pretty quickly though
TThe list moves slowly but the numbers don’t match pre order numbers.
So for instance every so often he will update the list with everyone who dropped off and you will drop 150 spots over night.
So for instance every so often he will update the list with everyone who dropped off and you will drop 150 spots over night.
TThe bot is showing actual sales shipments and doesn’t account for drop outs.
For that he updates the list and that’s why it’s never actually a 1000 unit wait
For that he updates the list and that’s why it’s never actually a 1000 unit wait