atm thers absolutely no need to buy TM, way better options for same or less around
atm thers absolutely no need to buy TM, way better options for same or less around
Soh god i just looked up TM website...hornet stick with base for .......600$....for that price you can get a Winwing hornet stick+base WITH a hornet throttle+base
DYeah, their pricing is as if they dont want to sell those things
Swhat i forgot to mention: with the WW offering you still have money left over .... well the only thing you DONT get with the WW offering would be a stick twist axis which would costs 80$ making it more expensive than TM
Sbut then again for ~40$ more you get roughly the same as TM + a throttle 
so i would say at that point who cares about that bit extra
so i would say at that point who cares about that bit extra
PWW needs to swap out the top 3 way on their f-15 e throttle grip for a 4 way+push hat & they could sell it as an A-10 throttle, they would then offer A-10, F-15E, F-16 & F-18 all of them using the same base too
SThe A-10 throttle (only because nobody else currently offers a a-10 specific throttle) and low end sticks like the t16000 are the only semi worthwhile offerings TM has imo
Hauch.. I checked that I paid 335 eur in 2011 for the whole Warthog kit (joystick + throttle). Inflation calculator says it would equal 424,50 eur in 2023's money.
HThe throttle still feels as new. The stick base's gimbal broke when I used a 10 cm extension with the stick :/
LWH throttle main board chip is vulnerable to static 
. I had to replace the chip and wiring in both throttle grips (and the 3-position switch in left throttle while I was at it). Better than new now, but of course STECS was released right after that 
so I haven't used it at all.
. I had to replace the chip and wiring in both throttle grips (and the 3-position switch in left throttle while I was at it). Better than new now, but of course STECS was released right after that so I haven't used it at all.
Ihi guys, are any of you flying the Apache with FFB pedals, what are your trim settings in DCS?
NThe pedal trim settings in DCS are useless since DCS doesn’t support FFB pedals. TelemFFB overrides the FFB spring for DIY pedals in DCS. Otherwise, all of the FFB commands meant for the cyclic get sent to the pedals as well.
BAhh but the feel of the cool metal....I notice it every time e I put my hands on the metal f18 super taurus throttle...I don't remember what the t37 and t38 stick grips felt like...kc135 yoke was metal...airbus stick is plastic...as much as we badmouth TM...warthog was king for a long time...and the pendulum pedals while exhibiting cheapness are a great design and have a real feel to them because they don't vary in width as you move them.
MWarthog was only "king" because there was nothing else on the market. As soon as there was competition, it got outshined, because the competition actually y'know, innovated
Byes but another way of looking at that is how far ahead of time they were able to bring a hotas to market...that they decided not to compete down the road is another story but so many of us enjoyed years of the warthog when it was the only game in town.
Nand I really don't see a reason to compare apples to oranges. Real viper grip is resin, so resin it should be (RS, TH). But real flanker grip is not resin, so it's kinda weird to be talking about MCGU/FLNKR as swinging a club on the end of an extension
NNot like the rhino is "inadequate" for any of these grips sooo
MMany real grips are resin but viper and warthog are both investment cast aluminum, which feels much different than zinc and feels closer to plastic. Essex still makes them.. I’ll link later when I get home
Ninteresting.
NI think F18 and F15 center grip are not metallic?
MF18 for sure resin but I think F15 is also
MConfirmed, F15 and F18 are cast resin of sorts, compared to aluminum F16 https://essexindustries.com/products/f-16-fighting-falcon-sidestick-control-grip/
https://essexindustries.com/products/f-15-stick-grip-front-seat/
https://essexindustries.com/products/f-18-stick-grip/
https://essexindustries.com/products/f-15-stick-grip-front-seat/
https://essexindustries.com/products/f-18-stick-grip/
Essex Industriesadmin
The F-16 Fighting Falcon Sidestick Control Grip is the main pilot/aircraft interface for flight, avionics and armament systems. Manufactured of precision cast aluminum, this grip is resistant to environmental conditions per MIL-STD-810. The stick grip provides a variety of single and multi-function switch assemblies for flight control, autopilot...
Essex Industriesadmin
The F-15 Stick Grip - Front Seat is the main pilot/aircraft interface for flight, avionics and armament systems. Manufactured of high-strength molded plastic, the grip is resistant to environmental conditions per MIL-STD-810. This stick grip provides a variety of single and multi-function switch assemblies for aircraft trim control, display mana...
Essex Industriesadmin
The F-18 Stick Grip is the main pilot/aircraft interface for flight, avionics and armament systems. Manufactured of high-strength molded plastic, the grip is resistant to environmental conditions per MIL-STD-810. This stick grip provides a variety of single and multi-function switch assemblies for aircraft trim control, display management, weapo...
MJust got the pdmg 777
For msfs - no profile so just use another jet as the proxy - but it feels horrible mainly no resistance on the stick -
Anyone got any suggest telem settings to make it feel better?
For msfs - no profile so just use another jet as the proxy - but it feels horrible mainly no resistance on the stick -
Anyone got any suggest telem settings to make it feel better?
JIs there a lead time for the TM->WW and VKB->TM adapters
NVKB adapter is just available
NShouldn't add appreciable time to your order
Jwhat about the TM->WW
RIf I buy a DIY kit, does anyone have PSU recommendations for that can easily be purchased in US/Canada? For the DIY FFB kit: 57BLF03 x2 + USB
Nwhat are you looking to buy?
Rsorry. Meant to say power supply recommendations
Nah, am using this right now, no issues but I also run rhino only, not pedals
Ncouldn't really find a reliable suitable one with the correct barrel plug (there are two different 5.5mm I think?), so I thought I may as well go XT60
Nin the future if I revamp the front plate I can just remove the adapter and go straight to XT60
RThank you, i will look for something similar
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SMeanwell. Lrs 350/24 works for 2 devices even
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
R350.4W 24V 14.6A Single Output Switchable Power Supply 24 Volts 14.6 Amps Features • AC input range selectable by a switch • Withstand 300 VAC surge input for 5 seconds • No load power consumption • 1U low profile • High operating temperature, up to 70°C • Protections: Short circuit / Overload / ...
Jcould the power supply that is in the prebuilt ffb base also power another motor for ffb pedals? If not, I already have a 1000w meanwell 24v power supply (UHP-1000-24), could that be swapped in to power both?
BI like the look of the Virpil FLNKR grip for me it will come down to the weight and whether I want to swap out the CM2 grip and how much that will be. I find the CM2 is a good choice with the Rhino for flightsims and then I use the Alpha primes on non-ffb bases for space sims
LThank you so much for my #Rhino #591 
AWarthog is not aluminum, it's what's called "pot metal"
Shttps://www.amazon.de/dp/B08R3T22YV?ref=ppx_yo2ov_dt_b_product_details&th=1
https://www.amazon.de/gp/product/B07SHVNLTJ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
And a 3D printed cover if you want to make sure noone touches the contacts and causes a short.
I am using self extinguishing, hardly flammable filament. Just to be 100% sure.
https://www.amazon.de/gp/product/B07SHVNLTJ/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1
And a 3D printed cover if you want to make sure noone touches the contacts and causes a short.
I am using self extinguishing, hardly flammable filament. Just to be 100% sure.
Das 12-V-Gleichstrom-Stecker-Anschlusskabel ist geeignet für Überwachungskameras, DVRs, Überwachungssysteme, LED-Lampen oder andere 2,1 x 5,5 mm Gleichstrom-Geräte usw. Das DC-Kabel endet in Rot (positiv)/Schwarz (negativ) für eine leichte Identifikation. 3. Das Kabelende ist abisolierter und ver...
3Dman 15A 250V Rocker Switch On/Off Power Socket Inlet Module Plug 10A Fuse Switch with 18 AWG Wiring 3 Pin - 2pcs
DFLNKR at least on photos looks like renamed VKB MCGU
Fwell, the FLNKR, MCG and MongoosT-50 are all made after the Su-27
DSU-35, but yeah
DOh look, I became green 
MReal Warthog grip, not TM's tribute version. Real Warthog grip has no pinky paddle and terminates straight at the bottom for center mounting unlike F16 that has a 13deg fwd angle for side stick ergonomy. But just like the F16 grip it is derrived from, it is investment cast aluminum https://essexindustries.com/products/a-10-flight-control-stick-grip/
Essex Industriesadmin
This Flight Control Stick Grip is the primary pilot/aircraft interface for flight, avionics and weapons system control on the Fairchild A-10.
HYes, it would easily power three or four Rhinos......
B... And I love it. I had Alpha and Alpha Prime... I went back to TM's A-10C and F/A-18 grips. But I'm def getting a FLNKR. it feels super nice in the hand, and the new hat design is very clever.
BBTW I know I mentioned this "somewhere" but the hat design of the FLNKR is new. When you press down slightly on the hat to actuate the center switch, it gets "locked to center" so that the other four (or 8? I don't know) switches cannot also be activated. That was the main thing I didn't like about the Alpha grips.
OFlnkr, 220cm, Rhino is my goal
Jthe psu that comes in the rhino, or the 1000 watt one I have?
