I think it’s me with my little understanding of computers that’s the problem. Give me electric cars

I think it’s me with my little understanding of computers that’s the problem.
Give me electric cars or anything mechanical and I’m fine, mechanical fitter and mechanic

, but a bloody PC and I’m stuffed.
Everything I use is on an IPad or similar

OOneill I think it’s me with my little understanding of computers that’s the problem. Gi...

walmis•7/9/24, 12:35 PM

If you open the https://vpforcecontrols.com/usb/rhino/ does indicator move smoothly when you move the joystick within the square?
I guess it could be the controls binding in MSFS is wrong

Wwalmis If you open the https://vpforcecontrols.com/usb/rhino/ does indicator move smoot...

OneillOP•7/9/24, 12:46 PM

Yes, it works as the instructions.
Just don’t know where to go from here with it

.
Sometimes i wish I’d have just kept all the money and bought myself a used Ikarus.
I’ve spent £12 k on it so far

amadeus•7/9/24, 4:01 PM

What sim? Ima reckon it could be MSFS and maybe you have the wrong types of axis bound?

Stryker990•7/9/24, 4:03 PM

@walmis good news adapter arrived and the rhino isnt just producing F's (in chat)

Aamadeus What sim? Ima reckon it could be MSFS and maybe you have the wrong types of axis...

smitty•7/9/24, 4:28 PM

there should be no axes bound in msfs. it all comes from telemffb

amadeus•7/9/24, 4:30 PM

But maybe something is bound tho, by default and causing the issue?

smitty•7/9/24, 4:31 PM

yes could be.. luckily the rhino isnt one of those common sticks that just auto-configure themselves

SStryker990 @walmis good news adapter arrived and the rhino isnt just producing F's (in chat...

Stryker990•7/9/24, 4:38 PM

rhino has been fixed and is working again

SundogZeus•7/9/24, 5:21 PM

Hi All, hoping someone can help me.. Telem FFB is not connecting to any sim. For the life of me I can't figure out what may have changed: attached is the log

message.txt4.04KB

SSundogZeus Hi All, hoping someone can help me.. Telem FFB is not connecting to any sim. For...

Hiob•7/9/24, 6:14 PM

Have you checked in the VP configurator if your Stick has a valid profile loaded? Do you have set any „load on startup“ profile in Telem that you subsequently removed?

Hiob•7/9/24, 6:15 PM

Trying to make sense of the log, but not really in to deep….

SundogZeus•7/9/24, 7:32 PM

It does have a valid profile loaded, but it cant find the LUA script for DCS even though it's in the right place. I disabled MSFS and Xplane support and don't get the Unable to connect to simconnect any more. But it still can't find the DCS telemetry. Here's more log file with some strange errors:

message.txt2.52KB

Hiob•7/9/24, 7:58 PM

Have you tried to delete the export.lua and let it install a new one?

OneillOP•7/9/24, 8:34 PM

Right I’ve got it sorted out .
The only problem is the stick doesn’t return on the screen when the actual stick has.
So if I bank over and then gently push the opposite way, it’s not smooth and sticks in that position on screen.
Absolutely nothing like real flying.
Any ideas ?

OOneill Right I’ve got it sorted out . The only problem is the stick doesn’t return on t...

Hiob•7/9/24, 8:54 PM

Sounds like a controls binding issue in your sim. Double bindings perhaps?

HHiob Sounds like a controls binding issue in your sim. Double bindings perhaps?

OneillOP•7/9/24, 9:08 PM

Should I delete the button configuration I’ve chosen ?
Is that what you mean.

OOneill Should I delete the button configuration I’ve chosen ? Is that what you mean.

Hiob•7/9/24, 9:11 PM

I can‘t help you in detail, since you are using a different sim than I do. But I would start with checking the axis bindings or anything related to pitch and roll. Delete any binding you don’t intend to use.

j9murphy•7/9/24, 10:29 PM

I bought a motor for pedals and I've connected the usb and communications line from the motor to the controller card and plugged in power and usb. I'm connected based on the message at the bottom of the screen, but I dont see any position information coming from the motor. I must be missing something...any ideas?

j9murphy•7/9/24, 10:36 PM

HHiob I can‘t help you in detail, since you are using a different sim than I do. But I...

OneillOP•7/9/24, 10:38 PM

I’m using msfs 2020, I’ll have a look tomorrow after work.
Thanks.

Jj9murphy I bought a motor for pedals and I've connected the usb and communications line f...

smitty•7/9/24, 10:48 PM

disable Y axis

smitty•7/9/24, 10:48 PM

j9murphy•7/9/24, 10:52 PM

like magic:) thank you

PokePoke•7/10/24, 9:29 AM

PokePoke•7/10/24, 9:30 AM

it is not center aligned what can I do ?

PPokePoke Click to see attachment

Hiob•7/10/24, 9:33 AM

I think most people use some kind of extension, which in most cases can be rotated freely. Also with a center stick you usually want the grip in an angle towards your right hand to have an ergonomic wrist position. Of course I can’t tell how it works out for your needs, The only solution I can suggest is some kind of extension.

PokePoke•7/10/24, 9:34 AM

Okay. is it normal? or mis printed?

PokePoke•7/10/24, 9:37 AM

i think is too much off centered

PokePoke•7/10/24, 9:38 AM

if all guys have like this, I am okay.

PPokePoke if all guys have like this, I am okay.