It's definitely worth a shot. I like the rhino and the old metal F16 stick I have on it but for the

It's definitely worth a shot. I like the rhino and the old metal F16 stick I have on it but for the heli it's needs to be further out and closer to the floor. That's where I have it now and needs to be further. Once I get the motion rig going and all the H145 frame and electronics I'll be able to figure it out better

Fr4Ged•8/6/24, 7:14 PM

oh, dang. I want to get the Monstertech chair as well. looks nice!

Alighierian•8/6/24, 7:14 PM

Well, that certainly is one way to do it

142nd_Bama•8/6/24, 7:15 PM

I mounted the rhino to the dcs edition simfab via the metal plate from my old warthog and it fits perfect. That’s with a vpc 200mm extention.

FFr4Ged oh, dang. I want to get the Monstertech chair as well. looks nice!

H145Rotor-SimsOP•8/6/24, 7:16 PM

It's a wonderful chair, I bought it years ago. Extremely comfortable. I waited until black Friday. At the time it was 15% off and free shipping. It doubles for me working in my office doing engineering work but I decided to build a dedicated H145 Sim

1142nd_Bama I mounted the rhino to the dcs edition simfab via the metal plate from my old wa...

H145Rotor-SimsOP•8/6/24, 7:16 PM

Do you have pic you could share?

HH145Rotor-Sims Do you have pic you could share?

142nd_Bama•8/6/24, 7:17 PM

Lemme check

HH145Rotor-Sims Do you have pic you could share?

142nd_Bama•8/6/24, 7:21 PM

Thought I did but apparently I don’t, I’ll get one when I get around it though

Jon (Bounty_V)•8/6/24, 8:26 PM

As nice as the MonsterTech chair is I have 2 complaints. 1) It's very expensive 2) It takes a long time to ship (almost rivals the Rhino). I had to go with something else to use, or I would have one myself

(basically I'm really jealous lmao)

Jon (Bounty_V)•8/6/24, 8:28 PM

Disclaimer: I've not kept up with MonsterTech shipping estimates, perhaps they have significantly reduced since the last time I checked

HH145Rotor-Sims Do you have pic you could share?

142nd_Bama•8/6/24, 8:32 PM

JJon (Bounty_V)As nice as the MonsterTech chair is I have 2 complaints. 1) It's very expensive ...

H145Rotor-SimsOP•8/6/24, 8:32 PM

I agree it's definitely expensive. When I bought mine it was just over 500 now they are 789 + plus shipping last I checked. If I had to buy one today I would because it's nice to sit in for a long period of time. I sit sometimes 8 hours in it doing work for my business and never feel it's uncomfortable. I had a few office chairs double the price with mesh etc and I can't say the same.

1142nd_Bama Click to see attachment

H145Rotor-SimsOP•8/6/24, 8:33 PM

That's a nice setup! You have your rhino set up close to how I do.

Jon (Bounty_V)•8/6/24, 8:33 PM

Yeah I see you have the one with caster wheels, so your usecase totally makes sense. I wanted the aluminum profile based one to hard mount to cockpit. I think it was just as expensive though, and took just as long or longer to ship.

Jon (Bounty_V)•8/6/24, 8:34 PM

I have a Secret Labs Titan chair I sit in for 15h+ daily and find it quite comfortable, so my use case is a bit different, since I don't need a new office chair

HH145Rotor-Sims That's a nice setup! You have your rhino set up close to how I do.

142nd_Bama•8/6/24, 8:34 PM

I’m very pleased with it. I thought I would never get it low enough but it could almost come up some…the best thing is you can feel all the vibrations in the rudders and seat!

Jon (Bounty_V)•8/6/24, 8:35 PM

That's the chair from Amazon right? The one that does cut outs in all their chairs after enough of us requested it?

JJon (Bounty_V)Yeah I see you have the one with caster wheels, so your usecase totally makes se...

H145Rotor-SimsOP•8/6/24, 8:35 PM

It's funny because I'm going to buy another one without casters for my H145 build because I don't want to cannibalize my office chair. The setup is different with the recline function.

Jon (Bounty_V)•8/6/24, 8:36 PM

If I ever make a second cockpit, to have a cockpit dedicated to flying and one to driving, that's a chair I'll seriously consider because there are so few on the market and that is a very solid price

Yeah the way the profile one mounts is totally different. I remember paying attention to measurements because I needed to know something for some reason and that difference really stood out to me

JJon (Bounty_V)Disclaimer: I've not kept up with MonsterTech shipping estimates, perhaps they h...

Alighierian•8/6/24, 8:36 PM

~1-6 weeks for the MFC currently, depending on production, currently stock, etc etc.

JJon (Bounty_V)That's the chair from Amazon right? The one that does cut outs in all their chai...

H145Rotor-SimsOP•8/6/24, 8:38 PM

There is one on Amazon , pretty cost effective but I don't want the racing look. I like the MTS because it tapers up to the top

Jon (Bounty_V)•8/6/24, 8:38 PM

The one Bama showed in their pics is what I was wondering if is from Amazon

Jon (Bounty_V)•8/6/24, 8:39 PM

Maybe one day replying to multiple messages in one message will be possible, instead I quoted none of them

Alighierian•8/6/24, 8:39 PM

Maybe in the same update that makes search useful

Alighierian•8/6/24, 8:39 PM

One can dream, I guess

Jon (Bounty_V)•8/6/24, 8:39 PM

Search on Mobile is so bad

Jon (Bounty_V)•8/6/24, 8:40 PM

Search on Mobile should be renamed to "search for a PC"

HH145Rotor-Sims It's definitely worth a shot. I like the rhino and the old metal F16 stick I hav...

SamNFTY•8/6/24, 9:13 PM

Do you have the pedals mounted off the ground, on the same bar as the Rhino?

SamNFTY•8/6/24, 9:13 PM

I would've thought that would be quite top heavy

1142nd_Bama Click to see attachment

westereq•8/6/24, 9:19 PM

im happy to see im not the only one forced to mount the fan on the outside

JJon (Bounty_V)The one Bama showed in their pics is what I was wondering if is from Amazon

142nd_Bama•8/6/24, 9:40 PM

Sorry didn’t know that question was from me. I bought it from simfab in Florida. I highly recommend it for vr users! It might be available on Amazon too?

Wwestereq im happy to see im not the only one forced to mount the fan on the outside 😂

142nd_Bama•8/6/24, 9:41 PM

lol yes I finally got tired of fighting it

1142nd_Bama lol yes I finally got tired of fighting it

westereq•8/6/24, 9:51 PM

my e-stop is just too big to fit the fan, so i put it on the outside

SSamNFTY Do you have the pedals mounted off the ground, on the same bar as the Rhino?

H145Rotor-SimsOP•8/6/24, 10:13 PM

Yeah I put alum. Blocks underneath but I can quick release under the chair and move it out of the way if needed.

Wwestereq my e-stop is just too big to fit the fan, so i put it on the outside

142nd_Bama•8/6/24, 10:42 PM

I think that was my issue also!

WhereNoLarkFlew•8/6/24, 11:23 PM

What’s up fellas, quick question: are there any settings I can use that’ll keep the stick centered using force trim in DCS helicopters? It seems to sag away from the trimmed center.

WhereNoLarkFlew•8/6/24, 11:24 PM

So I hit trim and remove my hand, the stick sags away from the center just enough that I have to keep my hand there. I noticed it mostly with the Apache.

WWhereNoLarkFlew What’s up fellas, quick question: are there any settings I can use that’ll keep ...

142nd_Bama•8/7/24, 12:17 AM

There’s a setting in effects, I think “balanced spring” is what it’s called, I’m new to the rhino, that helps that! Also in the spring effect there’s a tab you can check that’ll use sprung force to help hold it in place.

142nd_Bama•8/7/24, 12:18 AM

I had issues as well getting it dialed in with a 200mm ext with a heavy grip…

WWhereNoLarkFlew What’s up fellas, quick question: are there any settings I can use that’ll keep ...

amadeus•8/7/24, 12:21 AM

a continuation of what bama said above, are you running an extension? how heavy is your grip? Also how strong are the spring forces you are using? The apache forces i find are quite strong in practice, but also don't have an extension. also do you have adaptive re-centering on? that's a good thing to be running as well I find

WWhereNoLarkFlew What’s up fellas, quick question: are there any settings I can use that’ll keep ...

Number481•8/7/24, 12:37 AM

These guys are steering you in the right direction. Balance Spring will get you close, the adaptive recentering is the final icing that will keep the stick always centered. There's a section in the manual that covers both.. https://docs.google.com/document/d/1YL5DLkiTxlaNx_zKHEYSs25PjmGtQ6_WZDk58_SGt8Y/edit#heading=h.9yc6t8idkb39

Google Docs

VPforce Rhino Manual

VPforce RHINO FFB User Manual Version 0.81 (WIP) Table of Contents 1. Welcome 1 2. Getting Started 3 2.1. Technical Specifications 4 2.2. Physical Setup 5 2.2.1. The VKB Adapter 6 2.2.2. The WinWing Adapter 6 2.2.3. The RHINO Throw Limiter Adapters 7 2.3. Initial Connection and Updating ...

Reed•8/7/24, 12:44 AM

When you all are setting up balance spring are you doing while centered or moving to extremes?

Reed•8/7/24, 12:47 AM

I’ve been running a 5% on xy with good success. My grip isn’t heavy just have a very long extension so need a little extra help

H145Rotor-SimsOP•8/7/24, 2:20 AM

Ah yes for plane for sure but for heli I like it near the floor.

cereal•8/7/24, 3:02 AM

which games are compatible with VPforce?

cereal•8/7/24, 3:02 AM

other than MSFS and DCS. Is there a way to configure it with star citizen or elite dangerous?

Ccereal other than MSFS and DCS. Is there a way to configure it with star citizen or eli...

Limitless VR & Simrigs•8/7/24, 5:24 AM

Negative mate, All you can do is control the spring force with the dial for SC, pretty handy though. Games so far are DCS, FS2020, IL2, Xplane

1142nd_Bama Does anyone here fly the F-16 in dcs and if so do you have a pretty sizeable dea...

nubbins•8/7/24, 5:24 AM

you new to the F16? This is inherent to the DCS viper and why it sucks ass to fly compared to BMS on regular joysticks

nubbins•8/7/24, 5:25 AM

but i'm surprised you find it so noticeable with Rhino. imo Rhino is the only way to make the DCS viper tolerable, maybe it's the throw range and smoothness, I don't really mind it

1142nd_Bama Does anyone here fly the F-16 in dcs and if so do you have a pretty sizeable dea...

[

[OR] SerGeant•8/7/24, 6:53 AM

Yeah I find I horrible too.
Solution is a custom axis curve in DCS.

[

[OR] SerGeant•8/7/24, 6:54 AM

Can post a screenshot of my settings. I find they eliminate the deadzone quite good

It's definitely worth a shot. I like the rhino and the old metal F16 stick I have on it but for the

Similar Threads

Similar Threads

Similar Threads