I guess the problem is that the bolt which tights the switch is loose. I would like to have some gui

I guess the problem is that the bolt which tights the switch is loose. I would like to have some guidance to dismantle the device and tighten the nut. I am not happy to estaré unscrewing without a plan or basic knowledge

EE69_Frajo I guess the problem is that the bolt which tights the switch is loose. I would l...

PiNKSH!T•8/14/24, 1:51 PM

yeah I recently had to replace my estop & as a non diy'er it's pretty daunting feeling the first time you have to open up the Rhino

NNumber481 Just FYI… This is what it looks like with the front panel off. Just need a torx ...

E69_FrajoOP•8/14/24, 1:56 PM

Ok, this is good help. Good guidance. I will let you know about the outcome. As PINKMuD says, opening the Rhino can create a daunting feeling. Thank you very much to both of you

E69_FrajoOP•8/14/24, 1:58 PM

I am also worried about the wooden frame, not to overscrew it.

EE69_Frajo Ok, this is good help. Good guidance. I will let you know about the outcome. As ...

Hiob•8/14/24, 4:52 PM

On the protomaker github is an assembly instruction that for all intents and purposes works for the Rhino.

HHiob On the protomaker github is an assembly instruction that for all intents and pur...

E69_FrajoOP•8/14/24, 4:53 PM

Do you have a link?

EE69_Frajo Do you have a link?

E69_FrajoOP•8/14/24, 4:55 PM

Disregard. Found it

FarFutureFox•8/16/24, 1:35 PM

I’m getting lots of these messages when I press the import button. The number of dialogues varies and I can’t see any logic to the files it’s talking about. I’ve reinstalled, with no joy.

FFarFutureFox I’m getting lots of these messages when I press the import button. The number of...

walmis•8/16/24, 3:48 PM

Looks like Qt wants to load a shared library from another application (Jotta) with a different Qt version. Not sure why though.

Xaero Zero•8/16/24, 4:33 PM

strange, someone had following:
- USB Connected, all good, Chromium detects and board works well
- when powering on, nothing happens (no motors activated)
- when pluging/unpluging USB while motors are powered they go

active

active

and then

timeout

timeout

right away
- fan doesn't spin (maybe related)

anyone can suggest were to look?
Double checked wiring, everything seems correct

Xaero Zero•8/16/24, 4:35 PM

pretty common wiring with color code

XXaero Zero pretty common wiring with color code

walmis•8/16/24, 4:41 PM

Measure your PSU voltage coming into the motors

Wwalmis Measure your PSU voltage coming into the motors

Xaero Zero•8/16/24, 4:49 PM

just measured, 24V
when powering up, motors lights up and start blinking after 3-4 secs (not connected to USB)

XXaero Zero just measured, 24V when powering up, motors lights up and start blinking after 3...

walmis•8/16/24, 4:51 PM

Was it working before or is it a new build?

Wwalmis Was it working before or is it a new build?

Xaero Zero•8/16/24, 4:51 PM

new build, never powered it on until today

walmis•8/16/24, 4:52 PM

hmm, try unplugging one motor, see if the other comes online in the app

Wwalmis hmm, try unplugging one motor, see if the other comes online in the app

Xaero Zero•8/16/24, 4:53 PM

okies

Xaero Zero•8/16/24, 6:06 PM

issue found, when case is closed, E-Stop button pin bends and power not going through. works fine with open case. Going to bypass it for now, thank you very much @walmis

Xaero Zero•8/16/24, 7:22 PM

which direction to look if (only) one axis feels grinding gears on gain 60%+ ?

XXaero Zero which direction to look if (only) one axis feels grinding gears on gain 60%+ ?

Hiob•8/16/24, 9:00 PM

Check belt tension, check if the pulley sits tight on the motor axis, make sure the belt pulley isnt rubbing against your seat (ask me how I learned)….

LastRonin•8/16/24, 11:18 PM

May be a Walmis question, but is there a way to disable the buttons on the VPForce device, especially if you're using a VKB blackbox for the grip? Niche circumstance but some programs have a total button limit and I'd like to free the number of buttons that VPForce reserves by default.

LLastRonin May be a Walmis question, but is there a way to disable the buttons on the VPFor...

PiNKSH!T•8/17/24, 2:27 AM

you can use the loopback app + HIDhide to make the vkb grip & Rhino seen as one. Of course only downside is you will likely need to rebind in sim

HHiob Check belt tension, check if the pulley sits tight on the motor axis, make sure ...

Xaero Zero•8/17/24, 5:29 AM

thank you, will look into it today

shafs164•8/17/24, 6:57 AM

Hi how do you go about ordering an attachment for a VBK joystick to fit a thrust master base,

P3r•8/17/24, 9:45 AM

The AC adaptor that came with the my Rhino just died. Is there any AC adaptor that might be recommended to use as replacement?

Sshafs164 Hi how do you go about ordering an attachment for a VBK joystick to fit a thrust...

LeLv30_Superbus•8/17/24, 9:51 AM

You can mount a VKB grip mechanically with an adapter available from VPforce - is that what you want to do? If you have a TM base, it won't connect to the grip though. The grip would still require a VKB Blackbox to work.

LeLv30_Superbus•8/17/24, 9:52 AM

Order link in the FAQ ❓faq

LLeLv30_Superbus You can mount a VKB grip *mechanically* with an adapter available from VPforce -...

shafs164•8/17/24, 12:13 PM

So what i want to do is fit my VVKB grip to the moza FFB base and in a review video i watched done by Jabber he showed a VKB grip with some sort of adapter that would fit the MOZA FFB that has the fit as the TM and virpil grips.

Sshafs164 So what i want to do is fit my VVKB grip to the moza FFB base and in a review v...

Col. Sanders•8/17/24, 2:21 PM

Are you also planning on buying a Rhino?

Red Magic•8/17/24, 6:54 PM

just unboxed my rhino last night. Is it supposed to have a sort of cogging feeling right out of the box? does that go away once it's hooked up and it does its own movement

Number481•8/17/24, 7:01 PM

With no power applied, you will feel cogging in the motors. As soon as its plugged in, that should disappear.

Red Magic•8/17/24, 7:15 PM

I knew it was gonna be big but I'm still surprised at how big it is

I gotta think up a way to mount this thing

Haaank•8/17/24, 7:19 PM

Imo, it’s really compact for what’s in it.

NNumber481 With no power applied, you will feel cogging in the motors. As soon as its plug...

Col. Sanders•8/17/24, 8:03 PM

Col. Sanders•8/17/24, 8:03 PM

It's pretty amazing to turn it on the first time and feel how smooth it is. Sometimes I turn it off just to feel the cogging and switch it on to feel the magic.

CCol. Sanders Are you also planning on buying a Rhino?

shafs164•8/17/24, 9:20 PM

I am looking at both of them.

Red Magic•8/18/24, 5:36 AM

the telemetry app doesn't see dcs for some reason

Red Magic•8/18/24, 5:41 AM

dcs is very much open and running the 64

PPiNKSH!T you can use the loopback app + HIDhide to make the vkb grip & Rhino seen as one....

LastRonin•8/18/24, 5:42 AM

2nd downside is loopback doesn't bring over any axis information. It's just buttons and POVs.

Red Magic•8/18/24, 5:45 AM

the loopback thingy seems to make the 64 kinda work but the telemetry app still doesn't see dcs despite it being open

Red Magic•8/18/24, 5:45 AM

so i can get force trim to kinda work

Red Magic•8/18/24, 6:14 AM

got it. dcs was disabled by default tho it looked enabled at first. And apparently i gotta have the telem app open before i run even open dcs

LLastRonin 2nd downside is loopback doesn't bring over any axis information. It's just butt...

PiNKSH!T•8/18/24, 7:53 AM

oh true I never realised that, I only used it briefly

dgiatr•8/18/24, 12:00 PM

Does anybody know if lefthanded virpil grips like vpc constellation alpha or alpha prime work with Rhino vpforce ffb base?
Thanks

Ddgiatr Does anybody know if lefthanded virpil grips like vpc constellation alpha or alp...

kaltokri•8/18/24, 12:07 PM

Why shouldn't they work?

RRed Magic got it. dcs was disabled by default tho it looked enabled at first. And appare...

Number481•8/18/24, 12:30 PM

Not true... the very first time you enable DCS support, it adds its entry to your export.lua and installs its export script. DCS may require a full restart after the first install (though I don't think it does) but at a minimum, you will need to restart the flight. If a new version of TelemFFB includes an update to the export script, you will need to restart your flight if active, but do not need to restart DCS.

You can start TelemFFB whenever you wish. Before or after DCS start, or even while already in flight.