Check belt tension, check if the pulley sits tight on the motor axis, make sure the belt pulley isnt

Check belt tension, check if the pulley sits tight on the motor axis, make sure the belt pulley isnt rubbing against your seat (ask me how I learned)….

LastRonin•8/16/24, 11:18 PM

May be a Walmis question, but is there a way to disable the buttons on the VPForce device, especially if you're using a VKB blackbox for the grip? Niche circumstance but some programs have a total button limit and I'd like to free the number of buttons that VPForce reserves by default.

LLastRonin May be a Walmis question, but is there a way to disable the buttons on the VPFor...

PiNKSH!T•8/17/24, 2:27 AM

you can use the loopback app + HIDhide to make the vkb grip & Rhino seen as one. Of course only downside is you will likely need to rebind in sim

HHiob Check belt tension, check if the pulley sits tight on the motor axis, make sure ...

Xaero Zero•8/17/24, 5:29 AM

thank you, will look into it today

shafs164•8/17/24, 6:57 AM

Hi how do you go about ordering an attachment for a VBK joystick to fit a thrust master base,

P3r•8/17/24, 9:45 AM

The AC adaptor that came with the my Rhino just died. Is there any AC adaptor that might be recommended to use as replacement?

Sshafs164 Hi how do you go about ordering an attachment for a VBK joystick to fit a thrust...

LeLv30_Superbus•8/17/24, 9:51 AM

You can mount a VKB grip mechanically with an adapter available from VPforce - is that what you want to do? If you have a TM base, it won't connect to the grip though. The grip would still require a VKB Blackbox to work.

LeLv30_Superbus•8/17/24, 9:52 AM

Order link in the FAQ ❓faq

LLeLv30_Superbus You can mount a VKB grip *mechanically* with an adapter available from VPforce -...

shafs164•8/17/24, 12:13 PM

So what i want to do is fit my VVKB grip to the moza FFB base and in a review video i watched done by Jabber he showed a VKB grip with some sort of adapter that would fit the MOZA FFB that has the fit as the TM and virpil grips.

Sshafs164 So what i want to do is fit my VVKB grip to the moza FFB base and in a review v...

Col. Sanders•8/17/24, 2:21 PM

Are you also planning on buying a Rhino?

Red Magic•8/17/24, 6:54 PM

just unboxed my rhino last night. Is it supposed to have a sort of cogging feeling right out of the box? does that go away once it's hooked up and it does its own movement

Number481•8/17/24, 7:01 PM

With no power applied, you will feel cogging in the motors. As soon as its plugged in, that should disappear.

Red Magic•8/17/24, 7:15 PM

I knew it was gonna be big but I'm still surprised at how big it is

I gotta think up a way to mount this thing

Haaank•8/17/24, 7:19 PM

Imo, it’s really compact for what’s in it.

NNumber481 With no power applied, you will feel cogging in the motors. As soon as its plug...

Col. Sanders•8/17/24, 8:03 PM

Col. Sanders•8/17/24, 8:03 PM

It's pretty amazing to turn it on the first time and feel how smooth it is. Sometimes I turn it off just to feel the cogging and switch it on to feel the magic.

CCol. Sanders Are you also planning on buying a Rhino?

shafs164•8/17/24, 9:20 PM

I am looking at both of them.

Red Magic•8/18/24, 5:36 AM

the telemetry app doesn't see dcs for some reason

Red Magic•8/18/24, 5:41 AM

dcs is very much open and running the 64

PPiNKSH!T you can use the loopback app + HIDhide to make the vkb grip & Rhino seen as one....

LastRonin•8/18/24, 5:42 AM

2nd downside is loopback doesn't bring over any axis information. It's just buttons and POVs.

Red Magic•8/18/24, 5:45 AM

the loopback thingy seems to make the 64 kinda work but the telemetry app still doesn't see dcs despite it being open

Red Magic•8/18/24, 5:45 AM

so i can get force trim to kinda work

Red Magic•8/18/24, 6:14 AM

got it. dcs was disabled by default tho it looked enabled at first. And apparently i gotta have the telem app open before i run even open dcs

LLastRonin 2nd downside is loopback doesn't bring over any axis information. It's just butt...

PiNKSH!T•8/18/24, 7:53 AM

oh true I never realised that, I only used it briefly

dgiatr•8/18/24, 12:00 PM

Does anybody know if lefthanded virpil grips like vpc constellation alpha or alpha prime work with Rhino vpforce ffb base?
Thanks

Ddgiatr Does anybody know if lefthanded virpil grips like vpc constellation alpha or alp...

kaltokri•8/18/24, 12:07 PM

Why shouldn't they work?

RRed Magic got it. dcs was disabled by default tho it looked enabled at first. And appare...

Number481•8/18/24, 12:30 PM

Not true... the very first time you enable DCS support, it adds its entry to your export.lua and installs its export script. DCS may require a full restart after the first install (though I don't think it does) but at a minimum, you will need to restart the flight. If a new version of TelemFFB includes an update to the export script, you will need to restart your flight if active, but do not need to restart DCS.

You can start TelemFFB whenever you wish. Before or after DCS start, or even while already in flight.

Kkaltokri Why shouldn't they work?

dgiatr•8/18/24, 1:28 PM

Probably I don't think that there will be any problem but
It would be better if someone
had already tested it just to be sure...

Ddgiatr Probably I don't think that there will be any problem but It would be better if...

Dracks•8/18/24, 1:58 PM

I have one left and right. All worked perfectly

Dracks•8/18/24, 1:58 PM

It's the same connection between grip and base

DDracks I have one left and right. All worked perfectly 👌

dgiatr•8/18/24, 2:59 PM

What exactly left grip you have? Thanks

Ddgiatr What exactly left grip you have? Thanks

Dracks•8/18/24, 3:57 PM

Alpha prime

XXaero Zero pretty common wiring with color code

Subsonic•8/18/24, 3:58 PM

That there is a BEAUTIFUL wiring job.

Dentedend10•8/18/24, 5:32 PM

Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbind the axes in the sim if I want to use force trim/autopilot trim. But when I do that, no control input is detected in MSFS. So I had to bind the rhino to aileron/elevator axis. But then force trip didn’t seem to work even though I have checked the box in the app. Can anyone help?

DDentedend10 Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbi...

Dracks•8/18/24, 6:03 PM

You must download TelemFFB and check the "axis control" in the effects tab

DDracks You must download TelemFFB and check the "axis control" in the effects tab

Dentedend10•8/18/24, 6:06 PM

Yea it’s checked

Dentedend10•8/18/24, 6:06 PM

I checked it when flying one specific plane. Maybe have to do it for every one?

Dracks•8/18/24, 6:08 PM

Yeah you must do that for all new aircraft. And I recommend you to create a config file when loading the aircraft (sorry words are missing and I'm full occupied now

)

Dracks•8/18/24, 6:09 PM

(Config file create in "configuratior" and choose it in Telemffb in each aircraft)

Dentedend10•8/18/24, 6:10 PM

Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

DDentedend10 Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

Dracks•8/18/24, 6:15 PM

sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

DDracks sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

Dentedend10•8/18/24, 6:15 PM

Thanks again

DDentedend10 Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

Number481•8/18/24, 6:16 PM

No, don't bind them in MSFS.. it will conflict with what TelemFFB sends and your controls will flutter all over the place. You can set the default for MSFS to "control axes" in the global/offline editor. Then you will not have to enable on each specific aircraft... Easier to record a clip than describe the individual clicks :)...

NNumber481 No, don't bind them in MSFS.. it will conflict with what TelemFFB sends and your...

Dentedend10•8/18/24, 6:17 PM

Thanks makes sense, awesome! I had it like that for one plane but then I tried a different one , that’s when controls didn’t work. So I’ll do the global setting next

Dracks•8/18/24, 6:19 PM

sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

Red Magic•8/18/24, 9:11 PM

Wow. I'm really surprised at the Hz/frequency that the motors are capable of

Red Magic•8/18/24, 9:12 PM

I didn't expect them to mimic haptic feedback for different effects. Very awesome

frumpy•8/19/24, 4:30 AM

The FFB config seems to forget the settings every time I use it. Periodic effects are at 100%, so I set it to 30%, save it, store it, close it, restart the computer and FFB config - and there we got: 100% on the periodic. What do I miss?

LastRonin•8/19/24, 5:11 AM

Change the file it loads by default in the TelemFFB app settings page

LLastRonin Change the file it loads by default in the TelemFFB app settings page

frumpy•8/19/24, 5:28 AM

I am not loading any file?

PiNKSH!T•8/19/24, 10:32 AM

Re the grip/winwing adapter all FFFFFF's in the debug window means the stick is not being picked up yeah?

Check belt tension, check if the pulley sits tight on the motor axis, make sure the belt pulley isnt

Similar Threads