So what i want to do is fit my VVKB grip to the moza FFB base and in a review video i watched done

So what i want to do is fit my VVKB grip to the moza FFB base and in a review video i watched done by Jabber he showed a VKB grip with some sort of adapter that would fit the MOZA FFB that has the fit as the TM and virpil grips.

Sshafs164 So what i want to do is fit my VVKB grip to the moza FFB base and in a review v...

Col. Sanders•8/17/24, 2:21 PM

Are you also planning on buying a Rhino?

Red Magic•8/17/24, 6:54 PM

just unboxed my rhino last night. Is it supposed to have a sort of cogging feeling right out of the box? does that go away once it's hooked up and it does its own movement

Number481•8/17/24, 7:01 PM

With no power applied, you will feel cogging in the motors. As soon as its plugged in, that should disappear.

Red Magic•8/17/24, 7:15 PM

I knew it was gonna be big but I'm still surprised at how big it is

I gotta think up a way to mount this thing

Haaank•8/17/24, 7:19 PM

Imo, it’s really compact for what’s in it.

NNumber481 With no power applied, you will feel cogging in the motors. As soon as its plug...

Col. Sanders•8/17/24, 8:03 PM

Col. Sanders•8/17/24, 8:03 PM

It's pretty amazing to turn it on the first time and feel how smooth it is. Sometimes I turn it off just to feel the cogging and switch it on to feel the magic.

CCol. Sanders Are you also planning on buying a Rhino?

shafs164OP•8/17/24, 9:20 PM

I am looking at both of them.

Red Magic•8/18/24, 5:36 AM

the telemetry app doesn't see dcs for some reason

Red Magic•8/18/24, 5:41 AM

dcs is very much open and running the 64

PPiNKSH!T you can use the loopback app + HIDhide to make the vkb grip & Rhino seen as one....

LastRonin•8/18/24, 5:42 AM

2nd downside is loopback doesn't bring over any axis information. It's just buttons and POVs.

Red Magic•8/18/24, 5:45 AM

the loopback thingy seems to make the 64 kinda work but the telemetry app still doesn't see dcs despite it being open

Red Magic•8/18/24, 5:45 AM

so i can get force trim to kinda work

Red Magic•8/18/24, 6:14 AM

got it. dcs was disabled by default tho it looked enabled at first. And apparently i gotta have the telem app open before i run even open dcs

LLastRonin 2nd downside is loopback doesn't bring over any axis information. It's just butt...

PiNKSH!T•8/18/24, 7:53 AM

oh true I never realised that, I only used it briefly

dgiatr•8/18/24, 12:00 PM

Does anybody know if lefthanded virpil grips like vpc constellation alpha or alpha prime work with Rhino vpforce ffb base?
Thanks

Ddgiatr Does anybody know if lefthanded virpil grips like vpc constellation alpha or alp...

kaltokri•8/18/24, 12:07 PM

Why shouldn't they work?

RRed Magic got it. dcs was disabled by default tho it looked enabled at first. And appare...

Number481•8/18/24, 12:30 PM

Not true... the very first time you enable DCS support, it adds its entry to your export.lua and installs its export script. DCS may require a full restart after the first install (though I don't think it does) but at a minimum, you will need to restart the flight. If a new version of TelemFFB includes an update to the export script, you will need to restart your flight if active, but do not need to restart DCS.

You can start TelemFFB whenever you wish. Before or after DCS start, or even while already in flight.

Kkaltokri Why shouldn't they work?

dgiatr•8/18/24, 1:28 PM

Probably I don't think that there will be any problem but
It would be better if someone
had already tested it just to be sure...

Ddgiatr Probably I don't think that there will be any problem but It would be better if...

Dracks•8/18/24, 1:58 PM

I have one left and right. All worked perfectly

Dracks•8/18/24, 1:58 PM

It's the same connection between grip and base

DDracks I have one left and right. All worked perfectly 👌

dgiatr•8/18/24, 2:59 PM

What exactly left grip you have? Thanks

Ddgiatr What exactly left grip you have? Thanks

Dracks•8/18/24, 3:57 PM

Alpha prime

XXaero Zero pretty common wiring with color code

Subsonic•8/18/24, 3:58 PM

That there is a BEAUTIFUL wiring job.

Dentedend10•8/18/24, 5:32 PM

Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbind the axes in the sim if I want to use force trim/autopilot trim. But when I do that, no control input is detected in MSFS. So I had to bind the rhino to aileron/elevator axis. But then force trip didn’t seem to work even though I have checked the box in the app. Can anyone help?

DDentedend10 Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbi...

Dracks•8/18/24, 6:03 PM

You must download TelemFFB and check the "axis control" in the effects tab

DDracks You must download TelemFFB and check the "axis control" in the effects tab

Dentedend10•8/18/24, 6:06 PM

Yea it’s checked

Dentedend10•8/18/24, 6:06 PM

I checked it when flying one specific plane. Maybe have to do it for every one?

Dracks•8/18/24, 6:08 PM

Yeah you must do that for all new aircraft. And I recommend you to create a config file when loading the aircraft (sorry words are missing and I'm full occupied now

)

Dracks•8/18/24, 6:09 PM

(Config file create in "configuratior" and choose it in Telemffb in each aircraft)

Dentedend10•8/18/24, 6:10 PM

Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

DDentedend10 Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

Dracks•8/18/24, 6:15 PM

sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

DDracks sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

Dentedend10•8/18/24, 6:15 PM

Thanks again

DDentedend10 Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

Number481•8/18/24, 6:16 PM

No, don't bind them in MSFS.. it will conflict with what TelemFFB sends and your controls will flutter all over the place. You can set the default for MSFS to "control axes" in the global/offline editor. Then you will not have to enable on each specific aircraft... Easier to record a clip than describe the individual clicks :)...

NNumber481 No, don't bind them in MSFS.. it will conflict with what TelemFFB sends and your...

Dentedend10•8/18/24, 6:17 PM

Thanks makes sense, awesome! I had it like that for one plane but then I tried a different one , that’s when controls didn’t work. So I’ll do the global setting next

Dracks•8/18/24, 6:19 PM

sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

Red Magic•8/18/24, 9:11 PM

Wow. I'm really surprised at the Hz/frequency that the motors are capable of

Red Magic•8/18/24, 9:12 PM

I didn't expect them to mimic haptic feedback for different effects. Very awesome

frumpy•8/19/24, 4:30 AM

The FFB config seems to forget the settings every time I use it. Periodic effects are at 100%, so I set it to 30%, save it, store it, close it, restart the computer and FFB config - and there we got: 100% on the periodic. What do I miss?

LastRonin•8/19/24, 5:11 AM

Change the file it loads by default in the TelemFFB app settings page

LLastRonin Change the file it loads by default in the TelemFFB app settings page

frumpy•8/19/24, 5:28 AM

I am not loading any file?

PiNKSH!T•8/19/24, 10:32 AM

Re the grip/winwing adapter all FFFFFF's in the debug window means the stick is not being picked up yeah?

PiNKSH!T•8/19/24, 10:32 AM

I'm really starting to loath this ww adapter

PiNKSH!T•8/19/24, 11:02 AM

well that might not be bad but it can't be good, the pcb is twisted

TeufelHunden•8/19/24, 2:11 PM

can i use my VKB Gunfighter stick as is with the VKB software while using the Rhino base?

TeufelHunden•8/19/24, 2:13 PM

How plug and play is the VP base? I fly IL2 Great battles DCS and Warthunder is there going to be alot of setup time involved in these games or am I going to be able to enjoy the Rhino with little time and effort?

TTeufelHunden can i use my VKB Gunfighter stick as is with the VKB software while using the Rh...

Col. Sanders•8/19/24, 3:04 PM

Yes you just need the adapter and it works as normal. The VP base takes a little setup to get right, so more than just a true plug and play. But I found it more intuitive than the VKB software. You can tune it exactly to your like, so if you can use VKB software it shouldnt be an issue to use the rhino.

Telemffb is worth installing as it provides more and better effects than IL2 and DCS provide natively. Once you have it all set up, it is an experience like no other.

Col. Sanders•8/19/24, 3:07 PM

Also I would worry about the loop back software for the VKB grip. I saw it on the manual the first time I set it up. I have never needed it.

TeufelHunden•8/19/24, 4:06 PM

I'm not sure if i need or want the thow limiter that walmis offers? I currently use the VKB gunfighter with MCG grip that has the 8inch extension I'm very happy with the throw amount that I currently have with the gunfighter I'm not sure what distance that is though so does anyone have any advice?

TeufelHunden•8/19/24, 4:16 PM

I think I will be using the 8inch extension I have witht he Rhino so I dunno if I need throw limited or not

So what i want to do is fit my VVKB grip to the moza FFB base and in a review video i watched done

Similar Threads