On the protomaker github is an assembly instruction that for all intents and purposes works for the
On the protomaker github is an assembly instruction that for all intents and purposes works for the Rhino.
EDo you have a link?
EDisregard. Found it
FI’m getting lots of these messages when I press the import button. The number of dialogues varies and I can’t see any logic to the files it’s talking about. I’ve reinstalled, with no joy.
WLooks like Qt wants to load a shared library from another application (Jotta) with a different Qt version. Not sure why though.
Xstrange, someone had following:
- USB Connected, all good, Chromium detects and board works well
- when powering on, nothing happens (no motors activated)
- when pluging/unpluging USB while motors are powered they go
- fan doesn't spin (maybe related)
anyone can suggest were to look?
Double checked wiring, everything seems correct
- USB Connected, all good, Chromium detects and board works well
- when powering on, nothing happens (no motors activated)
- when pluging/unpluging USB while motors are powered they go
activetimeout- fan doesn't spin (maybe related)
anyone can suggest were to look?
Double checked wiring, everything seems correct
Xpretty common wiring with color code
WMeasure your PSU voltage coming into the motors
Xjust measured, 24V
when powering up, motors lights up and start blinking after 3-4 secs (not connected to USB)
when powering up, motors lights up and start blinking after 3-4 secs (not connected to USB)
WWas it working before or is it a new build?
Xnew build, never powered it on until today
Whmm, try unplugging one motor, see if the other comes online in the app
Xokies
Xissue found, when case is closed, E-Stop button pin bends and power not going through. works fine with open case. Going to bypass it for now, thank you very much @walmis
Xwhich direction to look if (only) one axis feels grinding gears on gain 60%+ ?
HCheck belt tension, check if the pulley sits tight on the motor axis, make sure the belt pulley isnt rubbing against your seat (ask me how I learned)….
LMay be a Walmis question, but is there a way to disable the buttons on the VPForce device, especially if you're using a VKB blackbox for the grip? Niche circumstance but some programs have a total button limit and I'd like to free the number of buttons that VPForce reserves by default.
Pyou can use the loopback app + HIDhide to make the vkb grip & Rhino seen as one. Of course only downside is you will likely need to rebind in sim
Xthank you, will look into it today
SHi how do you go about ordering an attachment for a VBK joystick to fit a thrust master base,
PThe AC adaptor that came with the my Rhino just died. Is there any AC adaptor that might be recommended to use as replacement?
LYou can mount a VKB grip mechanically with an adapter available from VPforce - is that what you want to do? If you have a TM base, it won't connect to the grip though. The grip would still require a VKB Blackbox to work.
LOrder link in the FAQ ❓faq
SSo what i want to do is fit my VVKB grip to the moza FFB base and in a review video i watched done by Jabber he showed a VKB grip with some sort of adapter that would fit the MOZA FFB that has the fit as the TM and virpil grips.
CAre you also planning on buying a Rhino?
Rjust unboxed my rhino last night. Is it supposed to have a sort of cogging feeling right out of the box? does that go away once it's hooked up and it does its own movement
NWith no power applied, you will feel cogging in the motors. As soon as its plugged in, that should disappear.
RI knew it was gonna be big but I'm still surprised at how big it is 
I gotta think up a way to mount this thing
I gotta think up a way to mount this thing
HImo, it’s really compact for what’s in it.
CIt's pretty amazing to turn it on the first time and feel how smooth it is. Sometimes I turn it off just to feel the cogging and switch it on to feel the magic.
SI am looking at both of them.
Rthe telemetry app doesn't see dcs for some reason
Rdcs is very much open and running the 64
L2nd downside is loopback doesn't bring over any axis information. It's just buttons and POVs.
Rthe loopback thingy seems to make the 64 kinda work but the telemetry app still doesn't see dcs despite it being open
Rso i can get force trim to kinda work
Rgot it. dcs was disabled by default tho it looked enabled at first. And apparently i gotta have the telem app open before i run even open dcs
Poh true I never realised that, I only used it briefly
DDoes anybody know if lefthanded virpil grips like vpc constellation alpha or alpha prime work with Rhino vpforce ffb base?
Thanks
Thanks
KWhy shouldn't they work?
NNot true... the very first time you enable DCS support, it adds its entry to your export.lua and installs its export script. DCS may require a full restart after the first install (though I don't think it does) but at a minimum, you will need to restart the flight. If a new version of TelemFFB includes an update to the export script, you will need to restart your flight if active, but do not need to restart DCS.
You can start TelemFFB whenever you wish. Before or after DCS start, or even while already in flight.
You can start TelemFFB whenever you wish. Before or after DCS start, or even while already in flight.
DProbably I don't think that there will be any problem but
It would be better if someone
had already tested it just to be sure...
It would be better if someone
had already tested it just to be sure...
DI have one left and right. All worked perfectly 
DIt's the same connection between grip and base
DWhat exactly left grip you have? Thanks
DAlpha prime
SThat there is a BEAUTIFUL wiring job.
DHi. Just tried MSFS for the first time with Rhino. In the manual it said to unbind the axes in the sim if I want to use force trim/autopilot trim. But when I do that, no control input is detected in MSFS. So I had to bind the rhino to aileron/elevator axis. But then force trip didn’t seem to work even though I have checked the box in the app. Can anyone help?
DYou must download TelemFFB and check the "axis control" in the effects tab
DYea it’s checked