Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbind the axes in the s

Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbind the axes in the sim if I want to use force trim/autopilot trim. But when I do that, no control input is detected in MSFS. So I had to bind the rhino to aileron/elevator axis. But then force trip didn’t seem to work even though I have checked the box in the app. Can anyone help?

DDentedend10 Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbi...

Dracks•8/18/24, 6:03 PM

You must download TelemFFB and check the "axis control" in the effects tab

DDracks You must download TelemFFB and check the "axis control" in the effects tab

Dentedend10OP•8/18/24, 6:06 PM

Yea it’s checked

Dentedend10OP•8/18/24, 6:06 PM

I checked it when flying one specific plane. Maybe have to do it for every one?

Dracks•8/18/24, 6:08 PM

Yeah you must do that for all new aircraft. And I recommend you to create a config file when loading the aircraft (sorry words are missing and I'm full occupied now

)

Dracks•8/18/24, 6:09 PM

(Config file create in "configuratior" and choose it in Telemffb in each aircraft)

Dentedend10OP•8/18/24, 6:10 PM

Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

DDentedend10 Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

Dracks•8/18/24, 6:15 PM

sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

DDracks sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

Dentedend10OP•8/18/24, 6:15 PM

Thanks again

DDentedend10 Thanks I’ll give that a try! And so axes must remain bound in MSFS to the Rhino?

Number481•8/18/24, 6:16 PM

No, don't bind them in MSFS.. it will conflict with what TelemFFB sends and your controls will flutter all over the place. You can set the default for MSFS to "control axes" in the global/offline editor. Then you will not have to enable on each specific aircraft... Easier to record a clip than describe the individual clicks :)...

NNumber481 No, don't bind them in MSFS.. it will conflict with what TelemFFB sends and your...

Dentedend10OP•8/18/24, 6:17 PM

Thanks makes sense, awesome! I had it like that for one plane but then I tried a different one , that’s when controls didn’t work. So I’ll do the global setting next

Dracks•8/18/24, 6:19 PM

sorry i mean NOT bound in MSFS. But TelemFFB keep the info for your next flight

Red Magic•8/18/24, 9:11 PM

Wow. I'm really surprised at the Hz/frequency that the motors are capable of

Red Magic•8/18/24, 9:12 PM

I didn't expect them to mimic haptic feedback for different effects. Very awesome

frumpy•8/19/24, 4:30 AM

The FFB config seems to forget the settings every time I use it. Periodic effects are at 100%, so I set it to 30%, save it, store it, close it, restart the computer and FFB config - and there we got: 100% on the periodic. What do I miss?

LastRonin•8/19/24, 5:11 AM

Change the file it loads by default in the TelemFFB app settings page

LLastRonin Change the file it loads by default in the TelemFFB app settings page

frumpy•8/19/24, 5:28 AM

I am not loading any file?

PiNKSH!T•8/19/24, 10:32 AM

Re the grip/winwing adapter all FFFFFF's in the debug window means the stick is not being picked up yeah?

PiNKSH!T•8/19/24, 10:32 AM

I'm really starting to loath this ww adapter

PiNKSH!T•8/19/24, 11:02 AM

well that might not be bad but it can't be good, the pcb is twisted

TeufelHunden•8/19/24, 2:11 PM

can i use my VKB Gunfighter stick as is with the VKB software while using the Rhino base?

TeufelHunden•8/19/24, 2:13 PM

How plug and play is the VP base? I fly IL2 Great battles DCS and Warthunder is there going to be alot of setup time involved in these games or am I going to be able to enjoy the Rhino with little time and effort?

TTeufelHunden can i use my VKB Gunfighter stick as is with the VKB software while using the Rh...

Col. Sanders•8/19/24, 3:04 PM

Yes you just need the adapter and it works as normal. The VP base takes a little setup to get right, so more than just a true plug and play. But I found it more intuitive than the VKB software. You can tune it exactly to your like, so if you can use VKB software it shouldnt be an issue to use the rhino.

Telemffb is worth installing as it provides more and better effects than IL2 and DCS provide natively. Once you have it all set up, it is an experience like no other.

Col. Sanders•8/19/24, 3:07 PM

Also I would worry about the loop back software for the VKB grip. I saw it on the manual the first time I set it up. I have never needed it.

TeufelHunden•8/19/24, 4:06 PM

I'm not sure if i need or want the thow limiter that walmis offers? I currently use the VKB gunfighter with MCG grip that has the 8inch extension I'm very happy with the throw amount that I currently have with the gunfighter I'm not sure what distance that is though so does anyone have any advice?

TeufelHunden•8/19/24, 4:16 PM

I think I will be using the 8inch extension I have witht he Rhino so I dunno if I need throw limited or not

Fr4Ged•8/19/24, 5:10 PM

you can get a limiter afterwards or just limit the throw via software afterwards

TTeufelHunden I think I will be using the 8inch extension I have witht he Rhino so I dunno if...

Dracks•8/19/24, 5:55 PM

I have a 10cm extension and I limit via the soft (configurator)

TeufelHunden•8/19/24, 7:03 PM

thanks guys I just ordered it its only 5 euros I basicallu just checked everything on the list lol

TeufelHunden•8/19/24, 7:09 PM

sorry guys one more question do I need the purchase the upgrade machined aluminum grip mount? is it necessary to have the metal for larger extensions or is this just something people wanted to make them feel better?

TeufelHunden•8/19/24, 7:10 PM

I only asking all this now cause my number came up and I'm ordering now

Number481•8/19/24, 7:17 PM

Depends on how ham-fisted you are..

I joke.. but a few people have accidentally cross threaded their grips/extensions onto the default 3d printed adapter.

I and most other users have never had a problem. That said, if it had been an option when I ordered SN#85.. I would have, because... why not.

TeufelHunden•8/19/24, 7:17 PM

I changed my order like 4 time snow...

TeufelHunden•8/19/24, 7:17 PM

is that a problem?

TeufelHunden•8/19/24, 7:17 PM

literally keep adding EVERYTHING

TeufelHunden•8/19/24, 7:17 PM

I think I have added it all now no more that I can add

TeufelHunden•8/19/24, 7:18 PM

hopefully it is not sending it each time i changed it

NNumber481 Depends on how ham-fisted you are.. 😂 I joke.. but a few people have accident...

Bob Bushman•8/19/24, 7:21 PM

I did just that, but printed a new one the day before my alu replacement showed up, still haven't mounted that.

The reason I mangled mine was trying to tweak my z extension slipping, not seeing how it actually had grub screws to fix that.

And I kept trying to mount it while sitting in the pit, with the thing between my legs and the extension still having the grip on.

If you take the rhino out and do this on the work bench or kitchen etc this would not be an issue.

That doesn't hurt to have aluminium one either.

Fr4Ged•8/19/24, 8:07 PM

I'd say get the aluminium adapter if you change grips a lot. else it isn't really a necessity.

Bambusa•8/19/24, 9:26 PM

I'm still having connection issues with DCS. It has worked a few times but then it won't work for a week. The computer sees the base, its powered on but i don't see it listed in DCS and have no control. Does anyone have any ideas?

BBambusa I'm still having connection issues with DCS. It has worked a few times but then...

Number481•8/19/24, 10:02 PM

what do you see when you go to: https://vpforcecontrols.com/usb/rhino/ ?

Bambusa•8/19/24, 10:02 PM

connected

Bambusa•8/19/24, 10:02 PM

and the controller moves the dot and the buttons work

Bambusa•8/19/24, 10:03 PM

i also see an ok next to rhino in game controller

Bambusa•8/19/24, 10:05 PM

so it seems to have something to do with my winwing gear

Bambusa•8/19/24, 10:08 PM

when i restart the computer, with only the winwing throttle and rudder pedals on a powered usb hub and the rhino plugged into the motherboard dcs recognizes it and it works. Once i attempt to connect the other powered usb with the mip the rhino stops working and i have no ac control. I need to disconnect the mip and restart the computer again to get it to work

Bambusa•8/19/24, 10:08 PM

all the winwing gear is up to date

Number481•8/19/24, 10:15 PM

hmm.. sounds like some low level usb bus shenanegans on your motherboard.. well outside my area of knowledge. Only help I can offer, and its not much help at all, is to ensure your MB's usb drivers are updated. Maybe try to figure out how your USB ports are split across busses and test with the hub(s) and/or the rhino on different ones.

Bambusa•8/19/24, 10:31 PM

ok i'll try that thanks

Wwitcohe Sorry, forgot to mention it's for DCS Update: Figured out the problem. Deselect...

Tumble•8/20/24, 1:13 AM

Hello! Your autopilot wouldn't work unless you Unboxed "Spring Force"?

BBambusa when i restart the computer, with only the winwing throttle and rudder pedals on...

kaltokri•8/20/24, 6:27 AM

In the past I had a lot of strange problems with different usb hubs.
Then I decided to attach all things directly to my mainboard and a 5port USB3.1 internal card.
All problems wend away.
Not all usb hubs are evil. But every time some has strange problems with devices, I ask them to try without usb hub and most of the time it was the root cause.

Hi. Just tried MSFS for the first time with Rhino. In the manual it said to unbind the axes in the s

Similar Threads

Similar Threads

Similar Threads