There’s that, plus handing over controls would be more seamless. Instead of having to enable and loo

There’s that, plus handing over controls would be more seamless. Instead of having to enable and look at controls indicator then matching then requesting control, you could just grab the stick wherever it is and request control

Arno•8/30/24, 10:32 AM

Mhhh, an internet controllable multi axis moveable actiuator that can vibrate which sits between your legs. I wonder what alternative uses people might come up with? Mighh be a whole new world of enthousiasts for this!

AArno Mhhh, an internet controllable multi axis moveable actiuator that can vibrate wh...

SamNFTY•8/30/24, 10:42 AM

GumbyOP•8/30/24, 10:56 AM

There’s always one lol.

I genuinely don’t understand all the “mechanics” regarding this sort of thing. I’m just thinking:

1) if my Rhino can move all around from blade flap, buffeting, crashes and anything else;

And

2) DCS can show, via the controls indicator, what the other multicrew pilot’s inputs are;

Then

3) is there something that can or cannot allow that data being shown, in the controls indicator, to be exported to the FFB function in the Rhino?

GGumby There’s that, plus handing over controls would be more seamless. Instead of havi...

Scarlet•8/30/24, 11:18 AM

Exactly. And with the ME set to "Equally Responsible" the handoff is instant both ways. Would really cut down on the Woh Boy

SScarlet Exactly. And with the ME set to "Equally Responsible" the handoff is instant bot...

GumbyOP•8/30/24, 11:22 AM

Right. Because you either enable the control indicator and try to match, or you ride the roller coaster lol

GGumby Right. Because you either enable the control indicator and try to match, or you ...

Scarlet•8/30/24, 11:23 AM

And I don't like having magic UI like that up soo...Buckel Up!!

VPforceBot•8/30/24, 11:25 AM

:package:

RHINO #0673 Has Shipped!

VPforceBot•8/30/24, 11:46 AM

:package:

RHINO #0674 Has Shipped!

AArno Mhhh, an internet controllable multi axis moveable actiuator that can vibrate wh...

buzzbomb•8/30/24, 1:20 PM

heh back in the late 90s we joked about the downfall of civilization because people would never leave the house and stop having babies because of this tech. My friend coined the term 'teledildonics' for such tech

jskibo•8/30/24, 1:33 PM

Got a nice package of parts this morning, just waiting on the other package. Going to be a long weekend

Bbuzzbomb heh back in the late 90s we joked about the downfall of civilization because peo...

Arno•8/30/24, 2:51 PM

Thrustmaster will be puzzled about the curious new grips with warthog connector that might hit the market if this thing flies in certain circles.

Spelljammer1•8/31/24, 1:42 AM

Is it possible to shorten the stem of the Rhino base connector, or is it mechanically required to be long?

Spelljammer1•8/31/24, 1:43 AM

I'm thinking since I will be installing a metal threaded connector, I may as well print a shorter underlying stem for easier sidestick use.

SSpelljammer1 Is it possible to shorten the stem of the Rhino base connector, or is it mechani...

DARRYL•8/31/24, 2:04 AM

@Hiob has a stubby version of the stick connector STL that he posted recently, probably in the diy-builds channel. I plan to use it soon, but you should ask him how it is to operate.

SSpelljammer1 I'm thinking since I will be installing a metal threaded connector, I may as wel...

Austringer•8/31/24, 3:42 AM

Why as a side stick?

DDARRYL @Hiob has a stubby version of the stick connector STL that he posted recently, p...

Hiob•8/31/24, 6:50 AM

What do you mean, how to operate?
It is one piece opposed to the two piece assembly of the Rhino, about 6cm shorter effectively IIRC. The only thing you have to take into account is, that the thread connector sits on the hight of the throw limiter. So the throw is limited even further unless you modify the throw limiter and make it wider (which is no problem though).
A FFB as a sidestick is a soso idea in my opinion as well. Every Aircraft that REALLY profits big time from FFB (warbirds, helicopters, steam punk) has a central mounted stick with s long throw. Sidesticks are only found in FBW jets like the F-16 or A320. If asked, I wouldn‘t recommend it.
But of course everybody is free to do as he likes!

HHiob What do you mean, how to operate? It is one piece opposed to the two piece asse...

DARRYL•8/31/24, 6:52 AM

I said how it is to operate, not how to operate it. Which you answered.

Hiob•8/31/24, 6:53 AM

Hiob•8/31/24, 6:56 AM

I don’t use it as an overall „short“ stick though, but to try to keep the total length at bay while using a 20cm gooseneck extension.

DARRYL•8/31/24, 7:04 AM

Good point, I guess that's my plan too. Just shorten overall length a bit to prevent my 200mm s-curve extension from being too much. A shorty sidestick is another beast altogether. I had originally planned on buying a MOZA (which is a "stubby" already), but changed my mind as I learned more about my options.

DDARRYL Good point, I guess that's my plan too. Just shorten overall length a bit to pre...

Hiob•8/31/24, 7:12 AM

Depending on how your extension is build, you can shorten that too. Mine was a bent aluminium tube with some machined parts that were screwed in with two screws each. I just disassembled it, cut the tube 15mm on one end (as much as possible before the curve), drilled a new hole and reassembled.

HHiob Click to see attachment

Spelljammer1•8/31/24, 7:33 AM

This looks like the solution for me! Maybe I need to edit it a little bit so it is not exactly threads hitting the throw limiter, but a tiny bit below them. Do you mind sharing the file?

AAustringer Why as a side stick?

Spelljammer1•8/31/24, 7:35 AM

I swap between side stick and centerstick. Mainly cockpit reasons for side stick. Irrelevant however: easier to add extensions when you need length for the center stick. Problems with height emerge when mounting a taller stick on the side-stick-mounted OG Rhino. So I'd rather address that, looks like it is @Hiob to the rescue!

SSpelljammer1 This looks like the solution for me! Maybe I need to edit it a little bit so it ...

Hiob•8/31/24, 7:37 AM

I can give you the STL (sorry, I have no parametric cad file for it), but I think I made it as short as possible without compromising any function or strength.

Hiob•8/31/24, 7:38 AM

I can give you a file for a one-piece throw limiter as well….

Spelljammer1•8/31/24, 7:38 AM

This little DIY helps with adjusting the table clamp between centre and side position. The wheels are lockable from Monstertech chair spares. (The clamp above provides the most stability, this is just support and oscillation block. The desk moves up and down, this is also why this adjustment with scissor-lab-equipment was needed.)

HHiob I can give you the STL (sorry, I have no parametric cad file for it), but I thin...

Spelljammer1•8/31/24, 7:38 AM

Awesome, STL is already great!

Spelljammer1•8/31/24, 7:38 AM

saved me a ton of time

SSpelljammer1 Awesome, STL is already great!

Hiob•8/31/24, 7:43 AM

https://discord.com/channels/965234441511383080/1145651561578647582/1272939376506044539

Spelljammer1•8/31/24, 7:47 AM

I'm curious if you had a phase in your project saved while it was still a two-piece solution like the OG Rhino?

I ask because I already have the metal connector from Walmis, so I might as well rather attach it to a version of a shorter stem (your stubby project).

SSpelljammer1 I'm curious if you had a phase in your project saved while it was still a two-pi...

Hiob•8/31/24, 9:05 AM

That‘s the problem, the metal connector is connected via a square-tube insert in the stem. In order to give it enough strength the gimbal part needs to be a certain length. Or in other words, if you want it shorter a meaningful amount, you HAVE to make it a single piece.

SSpelljammer1 I'm curious if you had a phase in your project saved while it was still a two-pi...

Hiob•8/31/24, 9:08 AM

…but yeah, I probably have the STLs of an in between step somewhere - need to search for it

HHiob That‘s the problem, the metal connector is connected via a square-tube insert in...

Spelljammer1•8/31/24, 10:55 AM

ah I see, makes sense, got it now

HHiob …but yeah, I probably have the STLs of an in between step somewhere - need to se...

Spelljammer1•8/31/24, 10:55 AM

awesome, shoot it when you stumble upon it, no rush

SSpelljammer1 Is it possible to shorten the stem of the Rhino base connector, or is it mechani...

walmis•8/31/24, 3:36 PM

Yes it's possible to shorten the stem. The stock Rhino has 20mm square aluminum tube of 100mm length. It's possible to swap out a shorter one of the desired size (though the leather part might need tweaking for a shorter stem). If you need one, you can shoot me a DM, we could make a custom one

Hiob•8/31/24, 4:30 PM

I wasn’t aware that the square tube in the stock Rhino is longer than in the Kit by Winger. Interesting. The more you know….

Wwalmis Yes it's possible to shorten the stem. The stock Rhino has 20mm square aluminum ...

Spelljammer1•8/31/24, 6:21 PM

That's superb.

I'll reach out with the measurements when I get back, travelling now so don't have access to the beloved Rhino.

HHiob I wasn’t aware that the square tube in the stock Rhino is longer than in the Kit...

SR-F_Winger_[73]_David•8/31/24, 6:41 PM

Yep. I Made it intentional shorter to have the User steer height via extension

SSR-F_Winger_[73]_David Yep. I Made it intentional shorter to have the User steer height via extension

Hiob•8/31/24, 6:49 PM

good call!

SSR-F_Winger_[73]_David Yep. I Made it intentional shorter to have the User steer height via extension

Spelljammer1•8/31/24, 9:37 PM

yeah good move! that would be helpful for my use case where the Rhino shifts between center and side stick position. more adjustability on the extension side is indeed purposeful

SSpelljammer1 yeah good move! that would be helpful for my use case where the Rhino shifts bet...

SR-F_Winger_[73]_David•9/1/24, 6:02 AM

If you're going the diy Route... @kaltokri AFAIK has Kits in Stock. Contact @kaltokri If you want one