You'll get an email and a message from VPforceBot.
You'll get an email and a message from VPforceBot.
BThanks
YWhat is exactly the additional length of built-in extenstion compared to vkb or virpil base? From the dimensions it looks like it is 160mm from the axis of rotation, and in my vkb it looks like i am only 40mm from the axis rotation (my guess, it might be more), hence I was assuming that you have defacto a 120mm extension built in. Has someone measure this more accuretely?
HFrom the point of rotation to the top of thread it‘s ~140mm measured from the CAD files.
NNot without collaboration from (and likely significant work by) the developer. Edit Well, after looking at some info about the heli, it seems there is at least some provisions built in to allow for springless joysticks and/or FFB implementations. But its unknown how or if this extends to the collective axis. Also I don't own the aircraft nor have access to the manual to even try to get a sense of what it would take
YThank you! Any idea on how does it compare with vkb or virpil?
HMy VKB has no more than 45-50mm to the connector. I would guess Virpil is about the same.
HIn my personal opinion the Rhino works best as a center/floor mount stick with extension. As a side stick e.g. it is not well suited.
OWell guys, I’ve not flown in the ikarus for over 9 months, I added the force feedback stick to my simulator to help with my training.
Today I took off unassisted, first landing was a bit crap, but the next 7 touch and goes were as my instructor said, bloody perfect.
So if anyone says Spending all that money on it is a waste, tell them they don’t know what they are talking about.
Looking to be going solo in the middle of December weather permitting.
Today I took off unassisted, first landing was a bit crap, but the next 7 touch and goes were as my instructor said, bloody perfect.
So if anyone says Spending all that money on it is a waste, tell them they don’t know what they are talking about.
Looking to be going solo in the middle of December weather permitting.
BIf its fun its not a waste 
, I think it's getting better but I still wouldn't rely on my home pit, even with rhino and vr, but I do think it can help more to keep the mindset running than say chair flying or just staring at flight instrument posters if you are weeks maybe even months between actual flights.
, I think it's getting better but I still wouldn't rely on my home pit, even with rhino and vr, but I do think it can help more to keep the mindset running than say chair flying or just staring at flight instrument posters if you are weeks maybe even months between actual flights.
WJust in case anyone wants to do something similar. I was able to modify one of my hotas mounts in my Next Level Racing Military Edition Chair. Pretty easy just need to make a couple of new holes and you can use the rhino as a collective! Works great with the H145. Autopilot moves the collective. Let me know if you want more info on how to modify the mount
Fthat is a wild setup
W@walmis i wish we had native support for the Virpil Hawk-60 collective grip! It would be awesome
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SHello everyone. Small reminder. I git one Kit ready to Ship to build a Monster Rhino that IS able to Take the biggest VPForce Motors 86BLF04.
Two opinions on the Base you can find Here:
https://forum.dcs.world/topic/357705-monster-ffb-rhino-diy-kit-supplyservice-supplementary-to-kaltokriwinger-kits/#comment-5533855
Usually i only make These Kit per Order cause the parts are quite expensive but i Made this extra one on Stock. To get my Investment Back now available at a reduced price (PM for Details).
Shipping Worldwide possible.
Two opinions on the Base you can find Here:
https://forum.dcs.world/topic/357705-monster-ffb-rhino-diy-kit-supplyservice-supplementary-to-kaltokriwinger-kits/#comment-5533855
Usually i only make These Kit per Order cause the parts are quite expensive but i Made this extra one on Stock. To get my Investment Back now available at a reduced price (PM for Details).
Shipping Worldwide possible.
ED Forums
Hi Folks, Based on the awesome Work of @TheAmazingGreat (thanks for your permission to use your Work AS a Base) I made some slight changes and am offering a VPForce MONSTER Rhino Kit sourcing service. The "Thing" kit has the following Specs: - Gimbal printed from laser sintered PA12. - Grip-Conne...
HOh, the urge.....
but I already spent a fortune on Rhino related stuff......
but I already spent a fortune on Rhino related stuff......
OLooking to do my solo in December sometime, then it’s just exams to get out of the way.
Next stop training for my flight instructor course the year after
Next stop training for my flight instructor course the year after
WWhat’s the average wait time between that message with the order form to the follow up message to pay?
HNot sure what the average is, but I received the invoice seven days after completing the order form.
V:package: 
RHINO #0732 Has Shipped!
RHINO #0732 Has Shipped!V:package: 
RHINO #0735 Has Shipped!
RHINO #0735 Has Shipped!V:package: 
RHINO #0734 Has Shipped!
RHINO #0734 Has Shipped!V:package: 
RHINO #0733 Has Shipped!
RHINO #0733 Has Shipped!
FMonster Rhino as a center stick and original Rhino as a side stick. Thank you @SR-FWinger[73]_David and @walmis for making this possible! The 86 motors are amazing. They never overheat no matter how hard or how long I pull.
CI am assuming the mounting footprint is different? Is that true?
FWidth is the same. Length is longer.
F
CWonder if the holes could be adjusted so it could still fit a monstertech mounting plate.
FAssuming yes, but dunno if you want that
AMT plate has 20mm slots, for 160x 140-180mm.
AI suspect having it supported on both ends is likely preferrable, yea
FI originally mounted my system to connect on one side using 4 40x40mm alu connectors
FIt rotated
Smounting pattern for the Monster is roughly 160mm width to 190mm length.
So width is the same while length is +30mm
So width is the same while length is +30mm
Sits a bit diffrent from the original TheAmazingGreat files. I made some slight changes to the bottom plate (added side reinforcements - probably not needed but i like to overengineer things;)) and added an exhaust fan for better ventilation.
Sthe front intake has a dust filter incorporated.
Sas you can see on the images of F14billy the height of the grip connector is roughly the same as original rhino
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=16)
RSent you a message on dcs forums.
BDamn, I want a monster Rhino. Looks sick and I bet it'd be great for long dogfights in warbirds (which is what I use my Rhino for mostly currently). Just a bit too poor to be acquiring anything big right now
FYes that's why I got it. Since I mostly do dogfights in DCS with a center stick and an extension.
OHi guys, anyone else have the MFG crosswinds?
I’m trying to turn the sensitivity down and I can’t find out how to get it less so it’s not shooting off in any direction.
I’m trying to turn the sensitivity down and I can’t find out how to get it less so it’s not shooting off in any direction.
HWhat do you mean? Regular ones or FFB modded?
SWill answer later
ORegular.
Every time I set off on the runway it’s massively over controlling , if I push the pedals to the limits 4 times it’s fine, land and it’s the same.
Bloody things.
Every time I set off on the runway it’s massively over controlling , if I push the pedals to the limits 4 times it’s fine, land and it’s the same.
Bloody things.
HDid you properly calibrate them with the MFG software?
Which Sim are we talking about?
what does the device manager in Windows show. Does the axis work properly there?
Depending on the answers I would assume problems in the sims control settings is more likely than anything else.
Which Sim are we talking about?
what does the device manager in Windows show. Does the axis work properly there?
Depending on the answers I would assume problems in the sims control settings is more likely than anything else.
Vdid simebody try the msfs 24 alpha with a rhino?
SHello, sorry to necro an old post. Did you manage to interface Sim Racing Studio with VPForce Rhino / TelemFFB?
FSo the max input changes during play? That should definitely not happen, calibrate them.
FHowever, some planes are just that sensitive to nose wheel steering during takeoff. In f16 I barely put in anything to correct it, and you gotta turn it off after 80 something knots or youll go flying
OYeah something is definitely not right.
I’ll try to reinstall it.
Thanks
I’ll try to reinstall it.
Thanks
WJust received the payment invoice, all done, now to wait for shipping. 
WJust for you to know, I just received my payment invoice, so that was four days after the order form message for me.
