Hi guys, anyone else have the MFG crosswinds? I’m trying to turn the sensitivity down and I can’t fi

Hi guys, anyone else have the MFG crosswinds?
I’m trying to turn the sensitivity down and I can’t find out how to get it less so it’s not shooting off in any direction.

OOneill Hi guys, anyone else have the MFG crosswinds? I’m trying to turn the sensitivity...

Hiob•10/14/24, 6:14 PM

What do you mean? Regular ones or FFB modded?

RReed Sent you a message on dcs forums.

SR-F_Winger_[73]_David•10/14/24, 6:27 PM

Will answer later

HHiob What do you mean? Regular ones or FFB modded?

OneillOP•10/14/24, 6:51 PM

Regular.
Every time I set off on the runway it’s massively over controlling , if I push the pedals to the limits 4 times it’s fine, land and it’s the same.
Bloody things.

OOneill Regular. Every time I set off on the runway it’s massively over controlling , if...

Hiob•10/14/24, 7:06 PM

Did you properly calibrate them with the MFG software?
Which Sim are we talking about?
what does the device manager in Windows show. Does the axis work properly there?
Depending on the answers I would assume problems in the sims control settings is more likely than anything else.

VPS_Choki•10/14/24, 8:08 PM

did simebody try the msfs 24 alpha with a rhino?

DDr. No Apparently I stumbled across this paid app. https://www.simracingstudio.com/pc-g...

Spelljammer1•10/14/24, 9:08 PM

Hello, sorry to necro an old post. Did you manage to interface Sim Racing Studio with VPForce Rhino / TelemFFB?

OOneill Regular. Every time I set off on the runway it’s massively over controlling , if...

Fierce_Fire•10/15/24, 5:32 AM

So the max input changes during play? That should definitely not happen, calibrate them.

Fierce_Fire•10/15/24, 5:33 AM

However, some planes are just that sensitive to nose wheel steering during takeoff. In f16 I barely put in anything to correct it, and you gotta turn it off after 80 something knots or youll go flying

FFierce_Fire However, some planes are just that sensitive to nose wheel steering during takeo...

OneillOP•10/15/24, 6:18 AM

Yeah something is definitely not right.
I’ll try to reinstall it.
Thanks

Hhectik Not sure what the average is, but I received the invoice seven days after comple...

WhiteHawk77•10/15/24, 12:05 PM

Just received the payment invoice, all done, now to wait for shipping.

MMajorDad (Z-5)The bot doesn't show me how many in front of me anymore, but I still haven't rec...

WhiteHawk77•10/15/24, 12:09 PM

Just for you to know, I just received my payment invoice, so that was four days after the order form message for me.

ReapDaddy•10/15/24, 12:52 PM

Mine just shipped yesterday!! But I will have to wait til Christmas to play with it. That was the deal with my wife.

ReapDaddy•10/15/24, 12:53 PM

Just noticed my color changed to owner. Cool

RReapDaddy Mine just shipped yesterday!! But I will have to wait til Christmas to play wit...

kaltokri•10/15/24, 1:35 PM

That will be hard 10 weeks.

Kkaltokri That will be hard 10 weeks. 😉

ReapDaddy•10/15/24, 1:43 PM

Tell me about it. But I managed two years ago when I bought my WinWing F16 stick and throttle and had her also gift those to me. Just glad she allows me to spend like this on my hobby, albeit in the guise of a GREAT Christmas gift. My VP saga began back in early March with my placing my Rhino order and now it will continue until Christmas. So be it.

smitty•10/15/24, 2:38 PM

just plop it on the kitchen table unplugged and play with it, making airplane and pew pew noises for a while.. eventaully she'll say fine! go hook it up!

superbird1011•10/15/24, 2:55 PM

Does anyone know if FS2024 is going to be supported by telemFFB or if we will have to wait a while?

superbird1011•10/15/24, 2:55 PM

I tried my rhino with the tech alpha of 2024 and it was shockingly bad. Not through any fault of the rhino, just not the best stick to test a new sim with

smitty•10/15/24, 2:57 PM

it worked mostly fine for me.. there was some issues when in career mode when the cutscenes were going though.

Number481•10/15/24, 3:43 PM

Works exactly like it does for 2020 while flying. As smitty said, there’s some issues (with 24) during some of the menus where simconnect is not “paused” and it seems the aircraft is flying or taxiing somewhere off screen. Not sure how we’ll address that (or if the issue will even exist at release)

OOneill Regular. Every time I set off on the runway it’s massively over controlling , if...

Blackrat•10/15/24, 8:28 PM

Default is you need to calibrate them every time the computer starts, simply push it to full limits on all axis including brakes. You can turn it off in the software, I found out like you lol.

BBlackrat Default is you need to calibrate them every time the computer starts, simply pus...

OneillOP•10/15/24, 9:03 PM

Cool.
At least it’s not fucked lol.

m2times_•10/15/24, 11:19 PM

Hello! Is it possible to order the rhino with a differently shaped stick/shaft (the part that the grip attaches to)?

m2times_•10/15/24, 11:23 PM

Due to my seat slider lever I would have to install the rhino a bit away from the seat (the stick/shaft would be like 8 cm away from where the thigh support ends)

Ideally the stick would be the same or similar height, but offset 8-10 cm towards the closer end of the box (the one with a gear)

m2times_•10/15/24, 11:23 PM

I thought about extensions but they would place the grip too high

m2times_•10/15/24, 11:25 PM

Thank you

m2times_•10/15/24, 11:39 PM

something like this

DARRYL•10/16/24, 12:16 AM

Yes, there are various offset extensions you can find. Either purchase from your grip supplier, or else 3D print one yourself from your design or somebody else's existing design.

m2times_•10/16/24, 5:31 AM

I do not want to use an extension

Mm2times_I do not want to use an extension

Col. Sanders•10/16/24, 5:44 AM

You can build your own with any modifications you want

Mm2times_I do not want to use an extension

Fierce_Fire•10/16/24, 5:45 AM

Then you'll have to redesign the middle connector

m2times_•10/16/24, 5:59 AM

https://qr4rigs.com/index.php?main_page=product_info&cPath=48_53_54&products_id=206

Joystick Extension for Rhino 50 x 80 [StickExt50Rh80] : QR4rigs, Qu...

QR4rigs, Quick Release Mounts for Sim Rigs Joystick Extension for Rhino 50 x 80 [StickExt50Rh80] - This joystick extension is designed exclusively to fit the the VPforce Rhino with the standard or metal stick connector and is for use with Thrustmaster Warthog/Cougar and Virpil (VPC) joystick grips. The main tube is 30mm in diameter and extends t...

m2times_•10/16/24, 5:59 AM

I guess this is minimal height added possible

m2times_•10/16/24, 6:16 AM

Could someone please measure how far is the center of the connector from the closer end? Seems like around a third of the way, so 7-8 cm

RReapDaddy Mine just shipped yesterday!! But I will have to wait til Christmas to play wit...

Flo-Soft•10/16/24, 6:57 AM

You can try to argue that you need 10 weeks to configure the device and then start playing at Christmas...

m2times_•10/16/24, 7:13 AM

That is a fair point though, I assume getting this to be perfect for a given sim/plane of preference is some work

Mm2times_Could someone please measure how far is the center of the connector from the clo...

Hiob•10/16/24, 7:37 AM

if you mean in the horizontal plane, it is exactly 6,5 cm on the short end and sides (not accounting for the belts).

Hiob•10/16/24, 7:38 AM

11,5 to the long end. The Body of the Rhino is ~~180~~ 190 (sorry, memory fooled me) by 130 and the Gimbal is 130 by 130.

HHiob if you mean in the horizontal plane, it is exactly 6,5 cm on the short end and s...

m2times_•10/16/24, 8:16 AM

I have to account for the gears/belts too

m2times_•10/16/24, 8:16 AM

I assume they're 2.5 cm each?

Hiob•10/16/24, 8:17 AM

The Production Rhino comes with 10mm Belts afaik. Plus clearence on both sides - lets say 20mm total. The Kit-Rhinos use 15mm belts,

Hiob•10/16/24, 8:18 AM

I turned my Rhino 90 degrees to have a short side without belt close to my chair for that very reason......

m2times_•10/16/24, 8:18 AM

I mean the vpforce rhino
Says in the documentation that it's 205 mm long

m2times_•10/16/24, 8:18 AM

Screenshot_2024-10-16-10-18-11-188_com.adobe.reader.jpg

m2times_•10/16/24, 8:19 AM

I mean the distance from left end of the belt to the center of the stick

m2times_•10/16/24, 8:21 AM

If the body is 180 mm and doc says body + belt is 205 then the belt has to be 25 mm but it seems like a bit too much so something is off

m2times_•10/16/24, 8:21 AM

@Hiob do you happen to use a quick release?

m2times_•10/16/24, 8:26 AM

I won't really be able to use the quick release I found sideways, and I will need it... But it seems that the mounting holes on the rhino are spaced only 0.32 mm differently when turned sideways

m2times_•10/16/24, 8:26 AM

I wonder if that will fit if I keep the QR orientation the same but rotate the rhino. Doesn't seem like too much of a difference

Mm2times_I mean the vpforce rhino Says in the documentation that it's 205 mm long

Hiob•10/16/24, 8:28 AM

Sorry, my memory fooled me. The body is 190 by 130

Hi guys, anyone else have the MFG crosswinds? I’m trying to turn the sensitivity down and I can’t fi

Similar Threads

Similar Threads

Similar Threads