Hello everyone. Small reminder. I git one Kit ready to Ship to build a Monster Rhino that IS able to

Hello everyone. Small reminder. I git one Kit ready to Ship to build a Monster Rhino that IS able to Take the biggest VPForce Motors 86BLF04.
Two opinions on the Base you can find Here:
https://forum.dcs.world/topic/357705-monster-ffb-rhino-diy-kit-supplyservice-supplementary-to-kaltokriwinger-kits/#comment-5533855
Usually i only make These Kit per Order cause the parts are quite expensive but i Made this extra one on Stock. To get my Investment Back now available at a reduced price (PM for Details).
Shipping Worldwide possible.

ED Forums

Monster FFB Rhino DIY kit supplyservice (Supplementary to Kaltokri/...

Hi Folks, Based on the awesome Work of @TheAmazingGreat (thanks for your permission to use your Work AS a Base) I made some slight changes and am offering a VPForce MONSTER Rhino Kit sourcing service. The "Thing" kit has the following Specs: - Gimbal printed from laser sintered PA12. - Grip-Conne...

Hiob•10/14/24, 7:57 AM

Oh, the urge.....

but I already spent a fortune on Rhino related stuff......

BBob Bushman If its fun its not a waste 😉, I think it's getting better but I still wouldn't ...

Oneill•10/14/24, 10:51 AM

Looking to do my solo in December sometime, then it’s just exams to get out of the way.
Next stop training for my flight instructor course the year after

Hhectik You'll get an email and a message from VPforceBot.

WhiteHawk77•10/14/24, 11:41 AM

What’s the average wait time between that message with the order form to the follow up message to pay?

WWhiteHawk77 What’s the average wait time between that message with the order form to the fol...

hectik•10/14/24, 11:59 AM

Not sure what the average is, but I received the invoice seven days after completing the order form.

VPforceBot•10/14/24, 3:01 PM

:package:

RHINO #0732 Has Shipped!

VPforceBot•10/14/24, 3:01 PM

:package:

RHINO #0735 Has Shipped!

VPforceBot•10/14/24, 3:01 PM

:package:

RHINO #0734 Has Shipped!

VPforceBot•10/14/24, 3:01 PM

:package:

RHINO #0733 Has Shipped!

f14billy•10/14/24, 4:12 PM

Monster Rhino as a center stick and original Rhino as a side stick. Thank you @SR-FWinger[73]_David and @walmis for making this possible! The 86 motors are amazing. They never overheat no matter how hard or how long I pull.

Ff14billy Monster Rhino as a center stick and original Rhino as a side stick. Thank you @S...

Col. Sanders•10/14/24, 4:36 PM

I am assuming the mounting footprint is different? Is that true?

f14billy•10/14/24, 4:38 PM

Width is the same. Length is longer.

f14billy•10/14/24, 4:38 PM

Col. Sanders•10/14/24, 4:40 PM

Wonder if the holes could be adjusted so it could still fit a monstertech mounting plate.

Fierce_Fire•10/14/24, 4:44 PM

Assuming yes, but dunno if you want that

Alighierian•10/14/24, 4:44 PM

MT plate has 20mm slots, for 160x 140-180mm.

Alighierian•10/14/24, 4:45 PM

I suspect having it supported on both ends is likely preferrable, yea

Fierce_Fire•10/14/24, 4:45 PM

I originally mounted my system to connect on one side using 4 40x40mm alu connectors

Fierce_Fire•10/14/24, 4:45 PM

It rotated

SR-F_Winger_[73]_DavidOP•10/14/24, 5:17 PM

mounting pattern for the Monster is roughly 160mm width to 190mm length.
So width is the same while length is +30mm

SR-F_Winger_[73]_DavidOP•10/14/24, 5:21 PM

its a bit diffrent from the original TheAmazingGreat files. I made some slight changes to the bottom plate (added side reinforcements - probably not needed but i like to overengineer things;)) and added an exhaust fan for better ventilation.

SR-F_Winger_[73]_DavidOP•10/14/24, 5:21 PM

the front intake has a dust filter incorporated.

SR-F_Winger_[73]_DavidOP•10/14/24, 5:22 PM

as you can see on the images of F14billy the height of the grip connector is roughly the same as original rhino

SSR-F_Winger_[73]_David Hello everyone. Small reminder. I git one Kit ready to Ship to build a Monster R...

Reed•10/14/24, 5:47 PM

Sent you a message on dcs forums.

B34ker•10/14/24, 6:02 PM

Damn, I want a monster Rhino. Looks sick and I bet it'd be great for long dogfights in warbirds (which is what I use my Rhino for mostly currently). Just a bit too poor to be acquiring anything big right now

BB34ker Damn, I want a monster Rhino. Looks sick and I bet it'd be great for long dogfig...

f14billy•10/14/24, 6:03 PM

Yes that's why I got it. Since I mostly do dogfights in DCS with a center stick and an extension.

Oneill•10/14/24, 6:03 PM

Hi guys, anyone else have the MFG crosswinds?
I’m trying to turn the sensitivity down and I can’t find out how to get it less so it’s not shooting off in any direction.

OOneill Hi guys, anyone else have the MFG crosswinds? I’m trying to turn the sensitivity...

Hiob•10/14/24, 6:14 PM

What do you mean? Regular ones or FFB modded?

RReed Sent you a message on dcs forums.

SR-F_Winger_[73]_DavidOP•10/14/24, 6:27 PM

Will answer later

HHiob What do you mean? Regular ones or FFB modded?

Oneill•10/14/24, 6:51 PM

Regular.
Every time I set off on the runway it’s massively over controlling , if I push the pedals to the limits 4 times it’s fine, land and it’s the same.
Bloody things.

OOneill Regular. Every time I set off on the runway it’s massively over controlling , if...

Hiob•10/14/24, 7:06 PM

Did you properly calibrate them with the MFG software?
Which Sim are we talking about?
what does the device manager in Windows show. Does the axis work properly there?
Depending on the answers I would assume problems in the sims control settings is more likely than anything else.

VPS_Choki•10/14/24, 8:08 PM

did simebody try the msfs 24 alpha with a rhino?

DDr. No Apparently I stumbled across this paid app. https://www.simracingstudio.com/pc-g...

Spelljammer1•10/14/24, 9:08 PM

Hello, sorry to necro an old post. Did you manage to interface Sim Racing Studio with VPForce Rhino / TelemFFB?

OOneill Regular. Every time I set off on the runway it’s massively over controlling , if...

Fierce_Fire•10/15/24, 5:32 AM

So the max input changes during play? That should definitely not happen, calibrate them.

Fierce_Fire•10/15/24, 5:33 AM

However, some planes are just that sensitive to nose wheel steering during takeoff. In f16 I barely put in anything to correct it, and you gotta turn it off after 80 something knots or youll go flying

FFierce_Fire However, some planes are just that sensitive to nose wheel steering during takeo...

Oneill•10/15/24, 6:18 AM

Yeah something is definitely not right.
I’ll try to reinstall it.
Thanks

Hhectik Not sure what the average is, but I received the invoice seven days after comple...

WhiteHawk77•10/15/24, 12:05 PM

Just received the payment invoice, all done, now to wait for shipping.

MMajorDad (Z-5)The bot doesn't show me how many in front of me anymore, but I still haven't rec...

WhiteHawk77•10/15/24, 12:09 PM

Just for you to know, I just received my payment invoice, so that was four days after the order form message for me.

ReapDaddy•10/15/24, 12:52 PM

Mine just shipped yesterday!! But I will have to wait til Christmas to play with it. That was the deal with my wife.

ReapDaddy•10/15/24, 12:53 PM

Just noticed my color changed to owner. Cool

RReapDaddy Mine just shipped yesterday!! But I will have to wait til Christmas to play wit...

kaltokri•10/15/24, 1:35 PM

That will be hard 10 weeks.

Kkaltokri That will be hard 10 weeks. 😉

ReapDaddy•10/15/24, 1:43 PM

Tell me about it. But I managed two years ago when I bought my WinWing F16 stick and throttle and had her also gift those to me. Just glad she allows me to spend like this on my hobby, albeit in the guise of a GREAT Christmas gift. My VP saga began back in early March with my placing my Rhino order and now it will continue until Christmas. So be it.

smitty•10/15/24, 2:38 PM

just plop it on the kitchen table unplugged and play with it, making airplane and pew pew noises for a while.. eventaully she'll say fine! go hook it up!

superbird1011•10/15/24, 2:55 PM

Does anyone know if FS2024 is going to be supported by telemFFB or if we will have to wait a while?

superbird1011•10/15/24, 2:55 PM

I tried my rhino with the tech alpha of 2024 and it was shockingly bad. Not through any fault of the rhino, just not the best stick to test a new sim with

smitty•10/15/24, 2:57 PM

it worked mostly fine for me.. there was some issues when in career mode when the cutscenes were going though.

Number481•10/15/24, 3:43 PM

Works exactly like it does for 2020 while flying. As smitty said, there’s some issues (with 24) during some of the menus where simconnect is not “paused” and it seems the aircraft is flying or taxiing somewhere off screen. Not sure how we’ll address that (or if the issue will even exist at release)

OOneill Regular. Every time I set off on the runway it’s massively over controlling , if...

Blackrat•10/15/24, 8:28 PM

Default is you need to calibrate them every time the computer starts, simply push it to full limits on all axis including brakes. You can turn it off in the software, I found out like you lol.

BBlackrat Default is you need to calibrate them every time the computer starts, simply pus...

Oneill•10/15/24, 9:03 PM

Cool.
At least it’s not fucked lol.

m2times_•10/15/24, 11:19 PM

Hello! Is it possible to order the rhino with a differently shaped stick/shaft (the part that the grip attaches to)?

m2times_•10/15/24, 11:23 PM

Due to my seat slider lever I would have to install the rhino a bit away from the seat (the stick/shaft would be like 8 cm away from where the thigh support ends)

Ideally the stick would be the same or similar height, but offset 8-10 cm towards the closer end of the box (the one with a gear)

Hello everyone. Small reminder. I git one Kit ready to Ship to build a Monster Rhino that IS able to

Similar Threads

Similar Threads

Similar Threads