VPforce Controls•14mo ago

Does VPforce work with ne msfs 2024?

Sslowmover Does VPforce work with ne msfs 2024?

TheAmazinGreat•11/21/24, 5:44 PM

With TelemFFB yes.

Boogie | 403•11/21/24, 10:41 PM

Rhino owners flying the DCS Hornet- any issues with getting the auto pilot activated? I’ve had to add some dead zone to the settings of my Super Libra so DCS doesn’t think the stick is still moving when I want autopilot on. Just curious if this issue is lessened (or worse) with the Rhino.

Scarlet•11/21/24, 10:44 PM

I've not noticed any autopilot issues with the Rhino

BBoogie | 403 Rhino owners flying the DCS Hornet- any issues with getting the auto pilot activ...

scarecrow6685•11/21/24, 10:48 PM

I had this issue where baro alt hold wouldn't engage for me. Applying adaptive centering in the configurator helped.

Sscarecrow6685 I had this issue where baro alt hold wouldn't engage for me. Applying adaptive c...

Boogie | 403•11/21/24, 10:49 PM

And this is part of the Rhino software vs DCS controller settings, correct?

scarecrow6685•11/21/24, 10:58 PM

Correct

j9murphy•11/21/24, 11:21 PM

I've had trouble getting ATTH to engage to hold a bank, I'll try the adaptive centering to see if that helps

XXaero Zero using that 5cm angle extender from TM, it's nice and height right spot on

SOB Simulations•11/22/24, 12:51 AM

OK, I got the Amazon thrustmaster 5 cm extension and I don’t see how it’s going to fit. There are not enough holes in the rhino base to accommodate the seven pins on the thrust master adapter.

f14billy•11/22/24, 12:57 AM

Does the other side have as many holes? Where you would connect the stick to the extension.

f14billy•11/22/24, 12:58 AM

Honestly I'd just cut the one that doesn't fit and try lol

f14billy•11/22/24, 12:58 AM

The TM stick only uses the ones you see in the rhino base.

SOB Simulations•11/22/24, 1:02 AM

The other side of the 5 cm adapter from thrustmaster has the identical holes, just female

f14billy•11/22/24, 1:13 AM

Compare it to the stick. You will see that the stick doesn't use all of them. I'd just cut the one that's extra.

SOB Simulations•11/22/24, 1:14 AM

Yeah I could do that - but why on earth would a thrustmaster branded extension not have the right pattern I’m wondering if this is counterfeit or something

f14billy•11/22/24, 1:15 AM

Amazon version isn't an official one. The virpil extensions come with the right pins.

SOB Simulations•11/22/24, 1:16 AM

It’s not an Amazon version. It’s a thrust master branded product sold on Amazon.

f14billy•11/22/24, 1:16 AM

Oh wow. That's bad.

SOB Simulations•11/22/24, 1:17 AM

Now that I look at it, I think I can just remove the pins and the connector altogether. I’m literally just using it to extend …no electrical connection is being made with a VKB stick

f14billy•11/22/24, 1:17 AM

If that's the case yes you just need the tube. No cables needed.

AndyHill•11/22/24, 2:38 AM

so what's the deal with msfs2024? is there native ffb? is there going to be?

SSOB Simulations OK, I got the Amazon thrustmaster 5 cm extension and I don’t see how it’s going ...

Xaero Zero•11/22/24, 6:50 AM

yes, i used 6pin on my rhino (DIY), but people did cut-off one of extra pins from that extender from what i've seen

Xaero Zero•11/22/24, 6:51 AM

the TM Ava base has 6 PIN connector, unlike any other TM bases before, dunno why they did this change

Xaero Zero•11/22/24, 6:51 AM

someone here had a screenshots of cut-off pin and that plastic thigny

AAndyHill so what's the deal with msfs2024? is there native ffb? is there going to be?

Flo-Soft•11/22/24, 8:19 AM

The official statement I heard is that there is no native FFB in MSFS 2024 at the moment. Their plan is to provide FFB in the future but they want to define some kind of new interface which needs time to talk to involved parties - sounds like a longer iteration for me...

Jj9murphy I've had trouble getting ATTH to engage to hold a bank, I'll try the adaptive ce...

Stryker990•11/22/24, 8:41 AM

Personally ive never gotten ATTH to work as i assumed it should rhino or not for me it always still wanders off

FFlo-Soft The official statement I heard is that there is no native FFB in MSFS 2024 at th...

Jon (Bounty_V)•11/22/24, 10:11 AM

wonder if the iteration will be long enough for logitech and thrustmaster to enter the ffb market as well, or for turtlebeach

being available on pc as well as xbox, it makes sense they would want to set up a way for ffb to function on xbox as well

currently the only brand that is remotely close to having xbox support is moza, who have some working sim racing products.

VPforceBot•11/22/24, 1:35 PM

:package:

RHINO #0797 Has Shipped!

VPforceBot•11/22/24, 1:35 PM

:package:

RHINO #0796 Has Shipped!

AAndyHill so what's the deal with msfs2024? is there native ffb? is there going to be?

smitty•11/22/24, 1:43 PM

frankly, with how borked the ui and other things are in fs2024, im glad it isnt native

SSOB Simulations It’s not an Amazon version. It’s a thrust master branded product sold on Amazon.

mechsicko•11/22/24, 2:18 PM

link? I've never seen an extension made by TM and seems awful sus they would use the wrong connector if so..

Mmechsicko link? I've never seen an extension made by TM and seems awful sus they would use...

SOB Simulations•11/22/24, 2:59 PM

After further research, it appears that AVA base uses a different connector so I do not believe it is counterfeit. Here is the link.

https://www.amazon.com/gp/aw/d/B0CYHG2CQ4?psc=1&ref=ppx_pop_mob_b_asin_title

THRUSTMASTER AVA Offset Adapter compatible with the AVA Base on PC

Optimize the realism and comfort of your piloting sessions with a configuration of the joystick in the central position. With AVA Offset Adapter, you can adjust the orientation of the joystick on the AVA base to 15° or 30°, providing more realistic immersion and comfort. Don't waste time making a...

j9murphy•11/22/24, 3:04 PM

I just got an AVA adapter as well.. still trying to figure the best way to cut off that extra pin. not much space to get in there. I thought about trying to just pull it out, but that sounds like a recipe for a bigger problem.

SSOB Simulations After further research, it appears that AVA base uses a different connector so I...

mechsicko•11/22/24, 3:05 PM

Haha what morons.. the main thing keeping them relevant in the face of other companies advancements is the fact their setup defined the standard, now they're breaking away from it lol

j9murphy•11/22/24, 3:07 PM

my solution at the moment instead of the ava is to use a short extension from virpil. I took the screws out of the female bracket on the rhino and there was enough slack in the cable to bring that up through the extension and plug it directly into the stick. this allows me to loosen the stick and tighten it at the 40 degree angle I was looking for (F18 grip)

j9murphy•11/22/24, 3:09 PM

I'm using the 50mm extension here...
https://virpil-controls.us.com/vpc-flightstick-extension.html

VPC Flightstick Extension

Features

★ Available in 50mm/75mm/100mm
★ Increased Precision and Smoother Handling
★ Allows for Offset Grip Rotation - Perfect for Center Mounted Setups
★ Includes Cable Extensions
★ Metal Construction

j9murphy•11/22/24, 3:11 PM

from Virpil: "Note: As the 50mm extension includes a solid connector it is not suitable for use with the TM Warthog base + TM Warthog grip combination."

This is why I pulled the rhino cable through the extension. It would also work if you fashioned a short enough extension cable instead of pulling the existing one through.

j9murphy•11/22/24, 3:11 PM

for the longer extensions, you must use a cable between the stick and the rhino

Mmechsicko Haha what morons.. the main thing keeping them relevant in the face of other com...

TheAmazinGreat•11/22/24, 3:14 PM

I’m betting they are trying to go different to get people locked into their ecosystem. Not very smart IMO but honestly 6 pin mini din would be welcomed by me because it’s the same as PS/2 which are a dime a dozen.

j9murphy•11/22/24, 3:15 PM

one other note is that the amount of available slack in that existing cable will be dependent on the throw of your stick base. Mine is 15 degrees in each direction and seems fine.

TheAmazinGreat•11/22/24, 3:15 PM

Maybe they have big plans for that extra pin in the future

mechsicko•11/22/24, 3:26 PM

That was my thought.. like adding a ministick or anaog brake or something but still going to diminish what's left of their market share since keeping that standard was basically the last thing keeping them relevant

Jj9murphy from Virpil: "Note: As the 50mm extension includes a solid connector it is not s...

f14billy•11/22/24, 3:31 PM

That's a great idea. Since I wanted to use the 5cm extension I asked virpil to send me their 7.5cm cable with it and I was able to fit it in the 5cm tube. All that trouble and now I'm actually using the 7.5cm tube with its own cable haha.

Mmechsicko That was my thought.. like adding a ministick or anaog brake or something but st...

TheAmazinGreat•11/22/24, 3:43 PM

It amazes me how much they charge for what they provide and it is the “go to” for many.

Jj9murphy I just got an AVA adapter as well.. still trying to figure the best way to cut o...

SOB Simulations•11/22/24, 7:01 PM

My plan is just to remove the two screws on either end (four screws total) and remove the electrical connection inside the adapter - that should work for me since I am using a VKB with black box

SOB Simulations•11/23/24, 3:22 AM

Well, I was able to remove the electrical connection and the pins on either side but now there’s no way to tighten it enough to where it doesn’t slop back-and-forth so this part was a complete waste of money

Hiob•11/23/24, 1:38 PM

@walmis Hardware Trim behavior:
Hey Walmis, I noticed that after the latest Firmware update, a trimmed position will be reset to the neutral point when a) the trim option is disabled or b) a profile without trim enabled is loaded. Which is an improvement and I assume is intentional.
However - when you then enable the trim feature again OR load a profile with trim enabled, it will instantly return to the last trimmed position.
I don't know if that is intentional, but I don't think, that is desirable behavior. I think once reset, the trim position should stay neutral until intentionally trimmed again. (also that suggests, that the trimmed position stay stored somewhere in the firmware even if a different config is loaded - which could cause unforeseen trouble I guess?!)

Hiob•11/23/24, 1:39 PM

Imagine flying a helicopter and being in some weird trimmed position and than crashing, flying fixed wing aftre that and then hop in a different helicopter again, being totally surprised by a weirdly trimmed cyclic.

HHiob @walmis Hardware Trim behavior: Hey Walmis, I noticed that after the latest Firm...

walmis•11/23/24, 1:44 PM

Hey, good point, I'll address this

Stryker990•11/23/24, 2:29 PM

@walmis wait you actually added the #41 and #42 virtual buttons on the WinWing F-16EX grip already? :hkYAY: couldnt find any mention in the firmware changelog and i was about to write a reminder but checked if you stealthadded them and turns out you did thx

SStryker990 @walmis wait you actually added the #41 and #42 virtual buttons on the WinWing F...

walmis•11/23/24, 2:36 PM

Probably forgot to mention it, lots of changes in v 17

Does VPforce work with ne msfs 2024?

Similar Threads

Similar Threads

Similar Threads