Is there a thread detailing the steps to get the Rhino to work in MSFS 2024?
Is there a thread detailing the steps to get the Rhino to work in MSFS 2024?
TWhere did you get the extension?
IFlight stick grip extension kit. All light and strong anodized aluminum material (both tubes and adapters). Grip Extension kit includes various extensions: 70mm, 105mm, 150mm. Total length adjustment with adapters: 70mm (2.75 in.) to 190mm (7.5 in.) Included in the kit: three extensions, female/m...
NIts identical to 2020 in operation. Enable MSFS in TelemFFB, start the sim. That's it.
Any aircraft you copy from your 2020 community folder over to 2024 should work without intervention.
Many of the default aircraft though have different "names" from 2020 so will require new profiles in TelemFFB. You can clone from the existing matching default profile. For example in 2020 you have "Asobo Cabri G2", in 2024 it is just "Cabri G2".
Always suggest using a wildcard option when creating a new profile so that it matches all the liveries (i.e.
Be aware that during menu transitions and in the career mode, the MSFS24 "pause" state is broken and will feed random telemetry to TelemFFB.. keep a hand on the stick to avoid whack-f*.**
Any aircraft you copy from your 2020 community folder over to 2024 should work without intervention.
Many of the default aircraft though have different "names" from 2020 so will require new profiles in TelemFFB. You can clone from the existing matching default profile. For example in 2020 you have "Asobo Cabri G2", in 2024 it is just "Cabri G2".
Always suggest using a wildcard option when creating a new profile so that it matches all the liveries (i.e.
Cabri G2.*)Be aware that during menu transitions and in the career mode, the MSFS24 "pause" state is broken and will feed random telemetry to TelemFFB.. keep a hand on the stick to avoid whack-f*.**
TRelated to this request. The latest firmware seems to have some very picky requirements for inertia and friction to maintain stability. I’ve seen a few requests like this one pop up and have had the issue myself. I thought I had it tuned out using the estimator gains but in sim have had some unstable conditions pop up. It’s a bit of a head scratcher for me too. I’ve had to either disable friction or inertia completely as the only reliable way to fix it.
WCan you try vel estimator @ 50 and Damper LPF @ 12Hz
It's also possible to use the pre v17 behaviour, by setting the Vel estimator to 0 and using lower damper LPF values (<8Hz)
It's also possible to use the pre v17 behaviour, by setting the Vel estimator to 0 and using lower damper LPF values (<8Hz)
THow do I get the Rhino working in War Thunder? (Sim Battles mode with planes) I see FFBeast users getting it working there https://www.youtube.com/watch?v=Ji7rUlsiWB4&t
This guy has total superiority as a result. I asked him how he did it and he simply replied it has to be configured correctly in software?
Other MSFFB2 guys also report great FFB there, but I've had no luck with either MSFFB2 or the Rhino.
I've tried just about every setting but result is the same, the stick is completely limp at all times and just intermittently rattles and shakes :/
Edit: Have to add I can of course get it "working" by configuring it as a non-FFB
This guy has total superiority as a result. I asked him how he did it and he simply replied it has to be configured correctly in software?
Other MSFFB2 guys also report great FFB there, but I've had no luck with either MSFFB2 or the Rhino.
I've tried just about every setting but result is the same, the stick is completely limp at all times and just intermittently rattles and shakes :/
Edit: Have to add I can of course get it "working" by configuring it as a non-FFB
TThank you for the tips! I’m currently at vel 100 and acc 50. Damper LPF at 15 and 20 had minimal effect so I did not try to tune down further. Turning the estimator gains up eliminated the minor oscillation with hands off at idle state but in sim has had some more powerful oscillations under certain telem FFB effects. Maybe I’ve got them up too high now. I will try these settings later tonight. should I set acc gain back to the Rhino default?
Sany idea why it does not work? i was flying and it stop working
SMotor Y seems to be disconected
Si plug and unplug the usb cable and it did not helpd
Si just tunred down the power to rhino and it worked
Fyou are running older firmware by the way
Sthanks mate i will upgrade it
TFriction and inertia are really high, try reducing to <30%. Or import default Rhino profile for baseline.
HWe need to see his effects settings. Maybe he has it on 10% there or not even enabled. I would recommend though to leave it on 100 on the effects page and dial in the desired intensity on the settings page. Such values wouldn’t work then of course.
@slowmover You can reset the motors on the debug page if they tilt out.
@slowmover You can reset the motors on the debug page if they tilt out.
SThanks i will try it
IWhat material are the parts for the Winwing adapter printed out of? My Rhino and adapter were of course made by Walmis himself.
IIs it just PLA?
TAre you using telemFFB at all?
HSo friction and inertia are not even enabled. Damper 60% x 100% is A LOT. I would probably reduce that .
Syeap
Swhen i enable friction the stick goes crazy
TDo you have any of the effects settings activated in TelemFFB (spring, damper, inertia, etc)?
Si am not sure but i think no
HNo wonder with those gains. I have none of them above single digit (100% x 5% e,g,)
Scan you post your settings?
IThank you! Got it printed, replaced, installed, and fixed!
HNot right now, sorry. But it is easy. On the effects page enable all four (spring, inertia, damping and friction) and set them to 100%. Then on the settings page, set spring to 0 and start dialing in the other three one by one (start small and increase step by step). When it feels good, increase spring again.
FHow did you achieve that? telemFFB doesn't work for me.
HI assume you have enebled MSFS support in TelemFFB. Have you created a new profile (or copied one over) for the aircraft you attempted to fly?
HDoes the yellow light for MSFS turn green when you run the game?
FFor me to have telemffb work with MS 2024 I have to run it AFTER an aircraft is loaded in the sim. Otherwise it won't detect it.
KIt's working fine out of the box for me
FI just got my rhino hooked up today and I was wondering if my joystick is supposed to be able to spin 360 degrees. I have a winwing orion 2 stick and I have the appropriate adapter for it.
Alike the grip just freely rotates 360 degrees?
FYes
FAi'm not familiar with how that adapter works, but i would assume it needs to be able to tighten to prevent that? but will probably need someone who knows more about the winwing adapter works to comment
Rjust got my Rhino today. Any quick and dirty guide or vid for DCS setup? The PDF is a little daunting
HRegarding DCS, make sure FFB is enabled in the game options.
HTelem will automatically intall an export script on first start up (may have to enable DCS in the settings)
RJust loaded TelemFFB. I thought I wasn’t getting many effects. Very different with it. Already had FFB enabled in DCS
RNo idea what I should be setting stuff at. I’ll read your link later tonight, cooking dinner now. Thank you
HDont worry, you'll get there.
It is a little bit overwhelming in the beginning, but it'll make sense eventually.
GN8
It is a little bit overwhelming in the beginning, but it'll make sense eventually.
GN8
RI’m a Viper guy mainly. Ordered the rhino for use with other jets, have FSSB MKII Ultra for the Viper
Rstick doesnt want to recenter at all in Hornet
R
FAdaptive recentering is your friend!
