We need to see his effects settings. Maybe he has it on 10% there or not even enabled. I would recom

We need to see his effects settings. Maybe he has it on 10% there or not even enabled. I would recommend though to leave it on 100 on the effects page and dial in the desired intensity on the settings page. Such values wouldn’t work then of course.
@slowmover You can reset the motors on the debug page if they tilt out.

TTheAmazinGreat Friction and inertia are really high, try reducing to <30%. Or import default Rh...

slowmover•11/24/24, 4:27 PM

HHiob We need to see his effects settings. Maybe he has it on 10% there or not even en...

slowmover•11/24/24, 4:28 PM

Thanks i will try it

Ice•11/24/24, 4:43 PM

What material are the parts for the Winwing adapter printed out of? My Rhino and adapter were of course made by Walmis himself.

Ice•11/24/24, 4:43 PM

Is it just PLA?

Sslowmover Thanks i will try it

TheAmazinGreat•11/24/24, 5:18 PM

Are you using telemFFB at all?

Sslowmover Thanks i will try it

HiobOP•11/24/24, 5:18 PM

So friction and inertia are not even enabled. Damper 60% x 100% is A LOT. I would probably reduce that .

TTheAmazinGreat Are you using telemFFB at all?

slowmover•11/24/24, 5:22 PM

yeap

HHiob So friction and inertia are not even enabled. Damper 60% x 100% is A LOT. I woul...

slowmover•11/24/24, 5:22 PM

when i enable friction the stick goes crazy

Sslowmover yeap

TheAmazinGreat•11/24/24, 5:22 PM

Do you have any of the effects settings activated in TelemFFB (spring, damper, inertia, etc)?

TTheAmazinGreat Do you have any of the effects settings activated in TelemFFB (spring, damper, i...

slowmover•11/24/24, 5:23 PM

i am not sure but i think no

Sslowmover when i enable friction the stick goes crazy

HiobOP•11/24/24, 5:24 PM

No wonder with those gains. I have none of them above single digit (100% x 5% e,g,)

HHiob No wonder with those gains. I have none of them above single digit (100% x 5% e,...

slowmover•11/24/24, 5:27 PM

can you post your settings?

TTrigaNZ The STL is n the knowledge base I think. How did you extend the cable from the W...

Ice•11/24/24, 5:32 PM

Thank you! Got it printed, replaced, installed, and fixed!

Sslowmover can you post your settings?

HiobOP•11/24/24, 5:43 PM

Not right now, sorry. But it is easy. On the effects page enable all four (spring, inertia, damping and friction) and set them to 100%. Then on the settings page, set spring to 0 and start dialing in the other three one by one (start small and increase step by step). When it feels good, increase spring again.

Ssmitty Msfs 2024 works fine with telemFFB.

FlyingKiwi•11/25/24, 10:22 AM

How did you achieve that? telemFFB doesn't work for me.

FFlyingKiwi How did you achieve that? telemFFB doesn't work for me.

HiobOP•11/25/24, 10:30 AM

I assume you have enebled MSFS support in TelemFFB. Have you created a new profile (or copied one over) for the aircraft you attempted to fly?

HiobOP•11/25/24, 10:31 AM

Does the yellow light for MSFS turn green when you run the game?

FFlyingKiwi How did you achieve that? telemFFB doesn't work for me.

f14billy•11/25/24, 3:24 PM

For me to have telemffb work with MS 2024 I have to run it AFTER an aircraft is loaded in the sim. Otherwise it won't detect it.

kronk•11/25/24, 7:07 PM

It's working fine out of the box for me

flasper•11/25/24, 7:31 PM

I just got my rhino hooked up today and I was wondering if my joystick is supposed to be able to spin 360 degrees. I have a winwing orion 2 stick and I have the appropriate adapter for it.

amadeus•11/25/24, 7:37 PM

like the grip just freely rotates 360 degrees?

flasper•11/25/24, 7:43 PM

Yes

flasper•11/25/24, 7:46 PM

amadeus•11/25/24, 8:12 PM

i'm not familiar with how that adapter works, but i would assume it needs to be able to tighten to prevent that? but will probably need someone who knows more about the winwing adapter works to comment

RogueSqdn•11/25/24, 9:09 PM

just got my Rhino today. Any quick and dirty guide or vid for DCS setup? The PDF is a little daunting

RRogueSqdn just got my Rhino today. Any quick and dirty guide or vid for DCS setup? The PD...

HiobOP•11/25/24, 10:30 PM

📃general
And make sure to get TelemFFB as well. The Rhino isn’t complete without it.

HiobOP•11/25/24, 10:31 PM

Regarding DCS, make sure FFB is enabled in the game options.

HiobOP•11/25/24, 10:32 PM

Telem will automatically intall an export script on first start up (may have to enable DCS in the settings)

HHiob https://discord.com/channels/965234441511383080/965234441511383083/1310008353690...

RogueSqdn•11/25/24, 10:32 PM

Just loaded TelemFFB. I thought I wasn’t getting many effects. Very different with it. Already had FFB enabled in DCS

RogueSqdn•11/25/24, 10:33 PM

No idea what I should be setting stuff at. I’ll read your link later tonight, cooking dinner now. Thank you

HiobOP•11/25/24, 10:35 PM

Dont worry, you'll get there.
It is a little bit overwhelming in the beginning, but it'll make sense eventually.
GN8

RogueSqdn•11/25/24, 10:36 PM

I’m a Viper guy mainly. Ordered the rhino for use with other jets, have FSSB MKII Ultra for the Viper

HHiob Dont worry, you'll get there. It is a little bit overwhelming in the beginning, ...

RogueSqdn•11/26/24, 12:33 AM

stick doesnt want to recenter at all in Hornet

RogueSqdn•11/26/24, 12:34 AM

f14billy•11/26/24, 1:28 AM

Adaptive recentering is your friend!

f14billy•11/26/24, 1:30 AM

Also having spring gain at 50% and the potentiometer at 45% means your spring gain is less than 25%. I'd say set spring gain to 100% and adjust the potentiometer to the spring gain setting that works for you while in the hornet.

RogueSqdn•11/26/24, 1:40 AM

getting close on centering. My problem now is everytime I hit autopilot I get a master caution and the AP won't stay on because the stick is moving

RogueSqdn•11/26/24, 1:47 AM

RogueSqdn•11/26/24, 1:50 AM

just like I was thinking, appears to be a deadzone thing. Slowly increasing DZ in VP until I don't get the caution

RogueSqdn•11/26/24, 1:51 AM

I think this does it

RogueSqdn•11/26/24, 1:54 AM

.7%]

RRogueSqdn I think this does it

f14billy•11/26/24, 2:52 AM

Did you enable adaptive recentering? With that you shouldn't need any deazone and the stick would stay centered during autopilot in the hornet.

RogueSqdn•11/26/24, 3:03 AM

yes I did, but it still jittered around when centered

RRogueSqdn yes I did, but it still jittered around when centered

f14billy•11/26/24, 3:11 AM

I've never experienced any jittering when in the hornet using the autopilot. I wonder if any of the filter settings may be causing that. A screenshot do the whole configuration page help to see if anyone notices an unusual value there. And maybe a video of the jittering showing the stick movement and also the config page as it happens.

RogueSqdn•11/26/24, 3:12 AM

RogueSqdn•11/26/24, 3:13 AM

You can very slightly see the in game stick shaking

RogueSqdn•11/26/24, 3:14 AM

RogueSqdn•11/26/24, 3:15 AM

You can’t hear the deedle deedle because of my headphones

f14billy•11/26/24, 3:18 AM

In the settings page you want to expand all the options on the right too.

RogueSqdn•11/26/24, 3:19 AM

We need to see his effects settings. Maybe he has it on 10% there or not even enabled. I would recom

Similar Threads

Similar Threads

Similar Threads