DevHeads IoT Integration Server•13mo ago

Just tried a docker crosscompile build on arm64 for QT6 Working nice with a rpi4

Just tried a docker crosscompile build on arm64 for QT6

Working nice with a rpi4

I should try to make a DIY oscilloscope so that I can tell my kids I was too poor to buy an oscilloscope so I made my own

Mmelta101 Just tried a docker crosscompile build on arm64 for QT6 Working nice with a rpi...

ZacckOsiemo•12/2/24, 7:48 AM

Huh explain abit please

Ssegfaultdev.elf I should try to make a DIY oscilloscope so that I can tell my kids I was too poo...

melta101OP•12/2/24, 7:48 AM

Start with signal analyser

Mmelta101 Start with signal analyser

segfaultdev.elf•12/2/24, 7:49 AM

I have to make my display work with tft_eSPI

ZZacckOsiemo Huh explain abit please

melta101OP•12/2/24, 7:49 AM

Created a docker env to handle cross compilation of QT6 builds on Arm64 arch

Mmelta101 Created a docker env to handle cross compilation of QT6 builds on Arm64 arch

ZacckOsiemo•12/2/24, 7:49 AM

Aaaah I see

ZacckOsiemo•12/2/24, 7:49 AM

You are using the Pi as your build box

ZacckOsiemo•12/2/24, 7:50 AM

And you compiling for arch that isn’t the same as the pi

ZZacckOsiemo You are using the Pi as your build box

melta101OP•12/2/24, 7:50 AM

Build box?

ZacckOsiemo•12/2/24, 7:50 AM

You are building on your Pi right?

ZZacckOsiemo And you compiling for arch that isn’t the same as the pi

melta101OP•12/2/24, 7:50 AM

Yes
As of now it's MacOS

Mmelta101 Yes As of now it's MacOS

ZacckOsiemo•12/2/24, 7:50 AM

Yes, I understand now

ZacckOsiemo•12/2/24, 7:50 AM

Cool stuff

ZZacckOsiemo Cool stuff

melta101OP•12/2/24, 7:51 AM

Now
If I combine that with pi gen micro

melta101OP•12/2/24, 7:51 AM

I should be able to make small linux build

Mmelta101 Now If I combine that with pi gen micro

ZacckOsiemo•12/2/24, 7:51 AM

I dare you!

ZZacckOsiemo I dare you!

melta101OP•12/2/24, 7:54 AM

Hehe
But first lemme make a good QT app

As of now it's a toggle button

melta101OP•12/2/24, 7:56 AM

Whole thing around this setup is not use my dev board

matthewflynn_•12/2/24, 9:52 AM

Hi Guys - any one have any tips for external monitors on the raspberry pi 5? I have a

https://www.amazon.co.uk/dp/B0CJCCDV65?ref=ppx_yo2ov_dt_b_fed_asin_title

attached to the pi through the USB and HDMI - but it just flickers output. I assume the power draw is not enough got it on the usbc - to usba?

Any tips or tricks to get around this?

ARZOPA Portable Monitor, 15.6" 1920×1080 FHD IPS Portable Monitor f...

ARZOPA Portable Monitor, 15.6" 1920×1080 FHD IPS Portable Monitor for Laptop with Kickstand, Ultra-Slim Second screen for Laptop/PC/Mac/PS3/4/5/Xbox - USB C & HDMI Connectivity - A1

Mmatthewflynn_Hi Guys - any one have any tips for external monitors on the raspberry pi 5? I h...

segfaultdev.elf•12/2/24, 9:53 AM

don't use you usb port for powering something

segfaultdev.elf•12/2/24, 9:53 AM

Just use it in case of data transfer

segfaultdev.elf•12/2/24, 9:54 AM

try with external power supply

segfaultdev.elf•12/2/24, 9:56 AM

specially raspberry pi's they can't provide large amount of current

matthewflynn_•12/2/24, 9:59 AM

Yes I agree - I need to use the usb for touch capabilities though - the unit has 2x usbc outputs though. Can I use one for providing power to it do you think? and one for connecitng to the pi?

Mmatthewflynn_Yes I agree - I need to use the usb for touch capabilities though - the unit has...

segfaultdev.elf•12/2/24, 10:01 AM

from their website

segfaultdev.elf•12/2/24, 10:01 AM

so you can use right one for only power

Mmatthewflynn_Hi Guys - any one have any tips for external monitors on the raspberry pi 5? I h...

melta101OP•12/2/24, 10:01 AM

do you need a 15 inch monitor?
just curious of the use case

segfaultdev.elf•12/2/24, 10:01 AM

and left one for data + power

Ssegfaultdev.elf so you can use right one for only power

matthewflynn_•12/2/24, 10:04 AM

thanks for that - I'll give this a go.

Mmelta101 do you need a 15 inch monitor? just curious of the use case

matthewflynn_•12/2/24, 10:04 AM

yes and no - its a prototype machine where I need to be able to provide the user with touch screen interface to adjust actuator settings.

matthewflynn_•12/2/24, 10:05 AM

so it does need a touch screen interface for interactivity - not necessarily 15" - it was just in the black friday sale lol

Mmatthewflynn_yes and no - its a prototype machine where I need to be able to provide the user...

melta101OP•12/2/24, 10:05 AM

why not a standard 7 inch screen used normally for rpi

melta101OP•12/2/24, 10:05 AM

you could use hdmi or mipi CSI is even better for that

matthewflynn_•12/2/24, 10:06 AM

the pi is actually mounted underneath the proto unit and I have a 2m cable running to the device.

Mmatthewflynn_the pi is actually mounted underneath the proto unit and I have a 2m cable runni...

melta101OP•12/2/24, 10:07 AM

I see

melta101OP•12/2/24, 10:07 AM

but 2M
damn

Mmelta101 why not a standard 7 inch screen used normally for rpi

matthewflynn_•12/2/24, 10:07 AM

I suppose I could - also the external monitor had a nice finish to it and could easily be mounted

Mmatthewflynn_the pi is actually mounted underneath the proto unit and I have a 2m cable runni...

segfaultdev.elf•12/2/24, 10:07 AM

it's okay for prototyping but powering a 15 inch monitor won't be much efficient if you think about the facilities it will give

Ssegfaultdev.elf it's okay for prototyping but powering a 15 inch monitor won't be much efficien...

matthewflynn_•12/2/24, 10:11 AM

No i agree - I missed that I could power it through the second usb port. I'll give this a go but I have my finger crossed lol.

Mmatthewflynn_No i agree - I missed that I could power it through the second usb port. I'll gi...

segfaultdev.elf•12/2/24, 10:12 AM

okok

matthewflynn_•12/2/24, 10:14 AM

but as an overall solution as long as I provide power through the 2nd port - it shouldn't draw from the pi? Do you think I need to rethink this?

Mmatthewflynn_but as an overall solution as long as I provide power through the 2nd port - it ...

segfaultdev.elf•12/2/24, 10:19 AM

I don’t know actually what will happen then but I think it should have internal protection so that both port can be isolated from each other

matthewflynn_•12/2/24, 12:40 PM

Thanks for all the help guys - I seem to be getting somewhere now (hopefully). I have a usbc cable on power block into display port 2 (for now I just have the usb connection disconnected for testing). when I plug in the HDMI to the monitor the pisture appears for between 5-10 second and then the signal seems to drop? (it remains powered as it flashed red/green/blue cycles). which if I then unplug and replug the hdmi back in the screen appears again.

Now the monitor is mini HDMI so I currently have it connected through a mini HMDI to full HDMI adapter, then micro HDMI to full HDMI?

https://www.amazon.co.uk/dp/B08Q7QGW52?ref=ppx_yo2ov_dt_b_fed_asin_title

and

https://www.amazon.co.uk/dp/B08RB28YCZ?ref=ppx_yo2ov_dt_b_fed_asin_title

could this be the issue for the signal drop?

Twozoh Mini HDMI to HDMI Adapter, Mini HDMI Male to full HDMI Femal...

Length Specifications Mini HDMI Male to HDMI Female Adapter 8 inch (20cm). High Speed Mini HDMI Adapter Mini HDMI male to HDMI female adapter transfers both high-definition video and digital audio from digital devices to your home theater. High-Resolution Mini HDMI to HDMI Femal 2.0 Adapter cord ...

Twozoh Micro HDMI to HDMI Cable 2M, High Speed HDMI D to HDMI A 2.0...

Item: HDMI A to HDMI D Type cable – Micro HDMI to HDMI Cable. Micro HDMI to HDMI Cable connect your Digital Camcorders, Digital Cameras or Game Consoles to your HDTV/Display, delivers both high-definition video (up to 4K Resolution) and uncompressed multichannel digital audio. High-speed Micro HD...

UUmesh Lokhande Sure, and meanwhile try to read blogs abt those sensors modules and watch YT vid...

az sum misho•12/2/24, 1:46 PM

yeahh thats what i am doing :D those cables are the ones i need, right?

ZacckOsiemo•12/2/24, 1:53 PM

Hey team I am facing an issue, I have a raspberry pi 0 2W and I am trying to interface it with a imx219-160 camera module. However it does not seem my rpi is detecting the camera

 INFO Camera camera_manager.cpp:325 libcamera v0.3.2+99-1230f78d
Preview window unavailable
ERROR: *** no cameras available ***

 INFO Camera camera_manager.cpp:325 libcamera v0.3.2+99-1230f78d
Preview window unavailable
ERROR: *** no cameras available ***

ZacckOsiemo•12/2/24, 1:53 PM

The above is the error I am finding whenever I try and use libcamera, I am trying to update the packages then try again

ZZacckOsiemo Hey team I am facing an issue, I have a raspberry pi 0 2W and I am trying to in...

Renuel Roberts•12/2/24, 1:59 PM

Your Raspberry Pi isn’t detecting the IMX219-160 camera module.
Verify Detection Check with vcgencmd get_cameravcgencmd get_camera. It should show detected=1detected=1.

ZZacckOsiemo Hey team I am facing an issue, I have a raspberry pi 0 2W and I am trying to in...

Umesh Lokhande•12/2/24, 2:00 PM

Try following steps:
1. Install bullseye os on your raspberry pi
2. After booting raspberry pi enter below commands
sudo raspi-config-> interface-> enable libcamera-> save->rebootsudo raspi-config-> interface-> enable libcamera-> save->reboot
sudo nano /boot/config.txtsudo nano /boot/config.txt(enter this command, scroll down till last [all]) under [all] enter the command "dtoverlay=imx708"
Now, save and reboot raspberry pi
Enter libcamera command-
sudo libcamera -hello t 0sudo libcamera -hello t 0
And check if the camera is detecting or not

RRenuel Roberts Your Raspberry Pi isn’t detecting the IMX219-160 camera module. Verify Detection...

ZacckOsiemo•12/2/24, 2:00 PM

@Renuel Roberts supported=0 detected=0, libcamera interfaces=0

Just tried a docker crosscompile build on arm64 for QT6 Working nice with a rpi4

Similar Threads

Similar Threads

Similar Threads