HDid you remove (or rename) any other .lua files in the scripts folder as well? If not try that.
HThank you. And what about if I have 3 boards connected all at once, does the software all me to see all three or do you have disconnect each board from usb and do one board at a time for programming?
WAll three will work fine
MNo i didn’t. I’ll do that with the others in there.
PThe red knob on my Rhino has come off. Can anyone tell me how to fix this?
WYou can open the rear panel (the one with the fan) and it tightens with a nut from the other side
PWill do thanks Walmis!
HHi guys, just got my collective calibrated with 86 motor on a gear box. Due to the length of the pole and the grip (metal) I'm not sure if I need to counter balance or the motor is strong enough. Not really sure what I should set. Currently I have the grip off, set the spring 100% and then found a setting for static force which I set to 50% so now when I move the collective handle it stays were I left it. Global gains and Global effects are at zero.
T@H145Rotor-Sims i think you should always counterweight a collective control since speed of movement is not an issue so extra mass should not hurt anything
HHi Tony, I have it connected to a 10:1 gear box and noticed if I set static force it can balance but I am using this strictly for the H145 HPG. I'm reading the documentation on it and it mentions to use balance spring and adaptive force to bring it to center. So I'm not sure if I'm not allowed to use static force in conjuction with that
H
TI dont mean to use the forces on the motor to balance...i mean to attach a physical weight to the end of the tube to balance the entire arm before ever putting it on the motor.
Sphysical weight counterbalance would be best
Tyes
HOkay that's what I'll do. I guess the goal is put as little resistance load on the motor as possible
Tyes exactly
HNow time to find some weight
Ttry ring weights or mic stand balance weights maybe on a threaded tube so they are adjustable.
TSolid-steel constructed counterweight attaches easily and securely to your boom or shaft for added balance and stability. On-Stage is a leader, changing the way musicians display, support, and protect their prized instruments and equipment. Music people proprietary product like On-Stage stands an...
TSpecification Item name: Archery Stabilizer Weight Weight: 51.1g Material: Aluminum Alloy Color : Red, Silver, Black Package include: 1 set stabilizer Our Story and Purpose We are a Professional factory focus on Archery Products, If you love Archery And need some related products, Just contact us...
Tjust a few ideas
HI just did a quick test with some weights. I need about 12 lbs or need to extend the rear
Tprobably best to extend the rear with a slightly larger tube and attack the weights to that...even a pvc tube to fit inside the collective tube and still have the wire come through the middle
HAs an electrician the first thing that came to mine was a 4 sq j box filled with concrete 
Tthat works
HIs there anything wrong with using 50% constant force?
Tor lead pellets
Taside from constant power draw and possible heat in the motors not really...but if the motor powers off or ps shuts off the the copter is going down unless you constantly hold the collective in place...hard balance w weights eliminates that issue
HJust by adding two emt connectors and 1 rigid coupling my static force is 12% and holding. I gave nothing else set
Tadd just a little more weight or slightly longer coupler and you should have it
Ti think the hand weight may be overkill
HI'm not sure what this really needs to be set to properly working in fs2020 the manual mentions the balance spring and adaptive re-entering but makes no mention of static force
Sthe manual is mostly written for joysticks that point upward
Tbeats me .... I know hardware but the settings are a complete mystery to me...I dont even know what to set my rhino to in fs2020 or dcs.
HThere is a section with HPG H145 and afcs
Sthats software. the hardware part of the manual deals with the vertically-oriented turnkey rhino
HSays for collective spring force is required
HThank you Tony
Sright. thats how it pushes the collective around/locks in place. has nothing to do with balancing
HOkay I see. I'm fire up 2020 and see if it will work
Sdid you calibrate and are both numbers between 0-4096
HYeah I followed this per your direction
HI have this message "please enable telemffb_control_axes in your config. I don't see that
SAxis Control
HIs that in telemffb or the vp force?
Stelemffb
HHave it enabled and still have an error
Sthats the joystick