SThanks for these videos! Very informative even just for us still waiting for ours to arrive 
The clicking action on the flip-down trigger sounds great in your video 3
The clicking action on the flip-down trigger sounds great in your video 3
GPerfect, many thx 
RNo word here either. Ordered in July. Can’t wait though.
DYou're welcome! It's really a great grip. Only 1 thing I must do is contacting Virpil for the right Hat. It's moving a little despite the fact that I pushed it all the way in
Fdid you replace the HATs yet? some of them have the alignment arrow the wrong way. lol
DYeah. The extrem right and the "middle" one. The middle one is moving (little but hum...)
But thank you for the information. I must try that !
But thank you for the information. I must try that !
RI'm in Germany and got mine from Virpil in Lithuania.
Fprobably mostly about order number.
mine is no. 22
mine is no. 22
Si have step files of motors here https://discord.com/channels/965234441511383080/1324449671443386459/1324455437642367086
Fare you already using the FLNKR with the Rhino or are you waiting or are you waiting for that grip type profile? if yes how did you set it up?
RI started using it now because I could not wait. I selected the Alpha Grip profile. What doesn't work are the swappable Buttons. There not all positions are recognized or I get double inputs. But for me that is Ok right now.
DSame answer as Gadreel 
. You can check my post 2-3 days ago for more explanation
. You can check my post 2-3 days ago for more explanationDOr my vids
DIn a nuts: if you're ok with less buttons or you're impatient go try this grip 
Fah, just checked your videos.
it basically is the same for me. the cursor controller and the brake axis aren't working at all.
I think I will switch back to the Constellation until Walmis gets hands on his FLNKR
it basically is the same for me. the cursor controller and the brake axis aren't working at all.
I think I will switch back to the Constellation until Walmis gets hands on his FLNKR
AChucks, I’d kinda have thought you’d be prioritised tbh
PDoes anyone know the height of the Winwing stick adapter , or have a step file of the adapter?
VCan anyone help me with dialing in my Rhino for the F4? I’m having a hell of a time getting it to feel right.
TYou’re aware of the bellows system right?
The phantom doesn’t really fly like a normal airframe but that’s what makes her special.
The phantom doesn’t really fly like a normal airframe but that’s what makes her special.
VYea, no I know. Just was looking for help with getting it dialed in a little better than what I have it at now. At least, hoping.
MBasically dial the gain up in DCS F4 special options to something you find comfortable at low speed and lower overall Rhino gain if you find it too stiff at high speed. And that's it. I don't think any other stick special options make a difference with FFB enabled, but I have them unchecked to be sure, and my gain is 200% roll, 250% pitch
MHeatblur simulation of the bellows system does not make much sense unless you have a stick 10x more powerful than stock Rhino, but it is what it is and we're stuck with it
THow is the bellows system supposed to feel? What about the roll?
THaving never flown the real thing or a real plane, I have no idea what anything is supposed to be like. So everything is just what feels right to me. But I’ve also always been on desk mounted spring centering sticks so I always wonder if that makes me biased to what feels right.
MMore or less what Heatblur did, but much heavier overall. The real system works in a something like 0-60 kgf range, so it goes from "quite heavy" at takeoff speed to "very heavy" at high speed. But with the same force gradient that Heatblur copied from the real world, our joysticks go from "almost nothing" at takeoff speed, to "okay" at high speed.
TSounds like then the overall implementation is good like you said. It’s just that because of the various forces available they gave us the gain adjustments. I understand now. I definitely feel the pitch get heavier at high speed. But have adjusted gain so it’s not too heavy.
TThanks for the explanation
FYeah, I am fine with the default forces. Don't want to destroy the gimbal. Lol
MThe problem is that if you crank up the gain in DCS settings you can get 'okay' force at low speed, but quickly saturate ffb and loose the dynamics at high speed
V:package: 
RHINO #0776 Has Shipped!
RHINO #0776 Has Shipped!MThe module would benefit from a different speed/gain curve, more in line with other DCS addons.
CI did end up putting a curve in an F4 specific VPForce config and using telem FFB to load that config when I fly the F4
FGood luck destroying it, it can take quite the punch
V:package: RHINO #0855 Has Shipped!
RHINO #0855 Has Shipped!V:package: RHINO #0857 Has Shipped!
RHINO #0857 Has Shipped!V:package: RHINO #0856 Has Shipped!
RHINO #0856 Has Shipped!TBut why have the gains at all, seems simple to say at X speed spring % is 50 and at y speed spring % is 100.
TWould it be better to leave DCS gains at 100 and tune dynamic spring in VPconfig?
Mwell, that's an option too, play with rhino settings to alter spring gain there. The thing is that F-4 at 100% gain outputs only something around 10% FFB spring force at 200 kts, so you need to bump it considerably on the VPconfig side
TSo basically they’ve designed it for someone who has a FFB stick that can output 60kgf at max. And us mere mortals have to use the gains to try to bump the curve up to actually feel it.
Myep
KThis one's mine! Now I'm just sat patiently waiting for the VKB BlackBox to come back in stock on their European site (or better yet be sold on the UK site) so I can actually use it...
BMine is #854 UK too, was hoping for my Birthday, which is today, but its coming Wednesday which is my Wedding Anniversary, I bet my wife will be thrilled ....
KHappy Birthday! A Rhino is the perfect wedding anniversary present for your wife, as it's sure to keep you out of her hair for longer.
PLooking for advice and opinions, going to build a Rhino , collecting parts now, but am trying to decide which version, the Gadroc with 57BLF03 motors or go with TheAmazinGreat version with 86BLF04 motors, It looks like I may be able to mount either in my rig, but will require a 8 to 9 inch (220m) extension. I fly DCS Warbirds and with an extension that long have issues with the 57BLF03 motors overheating? I am leaning to the 86BLF04 motors because I could always turn the torque down, but what is the survivability of a 3d printed gimbal for a extension this long?
TMy extension is 250-300mm depending on where you measure from and haven’t had any issues with the gimbal. If you want some extra strength you can look into the Monster Rhino kits that @SR-FWinger[73]_David provides. He includes a laser sintered PA12 gimbal for some extra assurance.
TI haven’t flown any warbirds on it but recently started learning the F4E. Before that, mostly the Hind. So not the biggest workout in terms of strength testing but it seems great. I also run mine at 75% spring setting so that equates to about 1.5x standard Rhino torque.
![SR-F_Winger_[73]_David](https://cdn.discordapp.com/avatars/98037306870472704/f924b51d2e4486c1eb873c2f4fb7f6a3.webp?size=40)
SBoth available now. Die to popular lower pricing demand i added the Option to Print the Gimbal from petg-cf and only have the connector in pa12
FFYI, the forces on the gimbal are close to the same for each motor/pulley combination, irrespective of what your extension is.