pin PA15 used multiple times in config
I wanted to connect an OctoPix RGB Neopixel Expansion Board to SPI3 to control the corner LEDs on the VCore 4, but when using the pins PB15, PB5, PB4, and PB3, I get an error because they are being used by the ADXL345 in RatOS. How can I disable or comment out that part in RatOS?
mushrooming filament, unload variables have no effect
Since replacing the Eva 3 with a RR Toolhead and adding a Orbiter sensor, I find that when unloading filament, it mushrooms and gets stuck just above the extruder gears, as indicated in the image. If I push the filament back in by hand, enough to reheat it and purge a bit, and then pull it back out fairly quickly, I can remove the filament. So I thought I'd try setting the variable that's supposed to effect unload speed, but it didn't.
I tried moving it up to 10 mm/s, then 30, then 100, but there was no change between any of those. I know it's capable of running at least 25mm/s in reverse as the retract option in klipperscreen will actually run faster when selecting that speed.
printer.cfg excerpt:...
Turn off MCU Temperature Sensor Permanently
How can I turn off the [temperature_sensor SKR_1.4] in RatOS.cfg permanently? Everytime I start the printer I get the "MCU temperature not supported on lpc1768" error. Then I comment the section in RatOS.cfg and then whenever I power cycle the printer I need to redo this step as its is not permanent. I know how to add stuff in RatOS but am unsure how to delete stuff. Any help?
Solution:
currently that isn't possible. Copy what you have in ratos.cfg to a new file and then import that into your printer.cfg instead of ratos.cfg. Then you can modify your copy without it being overwritten after reboot
Nothing working after latest update
I did some updates a day or 2 ago & now nothing works 😦
The updates were (as best as I remember): Beacon, Nevermore & RatOS configurator. I did the beacon 1st as my beacon is still giving issues. Then йdid the Nevermore & RatOS Config together.
All I get on the display is "Unable to get printer information from Moonraker."
I can go into the menu & see what versions are installed, See attached. I am fairly sure it is not connecting to the internet as I cannot SSH into it either.
Any suggestions or do I have to reinstall everything from scratch?...
Solution:
OK so it was the Nevermore update. It turns out that the update via klipper / moonraker did not work properly. I had to do a manual git pull via ssh & that worked.
Dimensional accuracy
Attached photo of the dimensions.
Diagonal diff : 0.3
X Y diff : 0.42
How can i solve it ? Belt tension are the same. Checked so much things....
Move Out of Range Error
I'm getting the error in the screen shot while doing an IDEX print on my VCore 4 500. Tried it in Prusa and Orca with the same result. I've done the VAOC, _VAOC_Reset, and CALCULATE_DC_ENDSTOP multiple times. It occurs when the printer switches to the other head. If I do a IDEX print with a small item in the middle of the plate it works OK. Seems like the IDEX has some weird boundary issues going on. Any ideas on what the issue is?
Ran out of stack space trying to match the regular expression.
Hello,
I have run into this error a couple of times now when slicing a STL or 3mf file in PrusaSlicer using the Regular Expressions under https://os.ratrig.com/docs/slicers#change-settings-based-on-feature-optional and implementing this in the Output options in the Print Settings of PS. A small object seems to run fine but multiple objects or a larger object then I get this error.
Any assistance would be greatly appreciated....
